Accessories

Feather is the flagship development board from Adafruit, and like its namesake, it is thin, light, and lets you fly! We designed Feather to be a ne...

AF-3336

This is a very special adapter, specifically used for adapting our RTD266X driver boards that have 50-pin TFT connectors to use 40-pin TFTs. Please...

AF-3305

You've learned the MicroPython programming language! MicroPython is a tiny open-source Python programming language interpreter that runs on microco...

AF-3271

Metal Hex Male/Female standoffs. #4-40 thread with 3/8" shank and 3/16" thread length. Can be stacked to create any length. Pack of 10

SF-PRT-10463

These nylon standoffs are ¾" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off t...

SF-PRT-10462

These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off...

SF-PRT-10461

This is a thermal printer like you would find on a cash register or adding machine. It will print simple strings passed to it via TTL serial, bitma...

SF-COM-10438

Do you feel like you're being followed as you traverse the expanses of the worldwide web? Privacy Badger is a browser add-on that stops advertisers...

AF-3355

What do you get when you power a layer of liquid crystal material sandwiched between two sheets of glass? A Liquid Crystal Light Valve (a.k.a a LCD...

AF-3330

These are clear, self-adhesive silicone bumpers 8mm in diameter and about 2mm tall. These bumpers raise your PCB or project up off your desk which ...

SF-PRT-10230

This LoRa Antenna Kit is meant for use with the LoPy LoRa, WiFi and BLE board or the SiPy Sigfox, WiFi and BLE board. But it's good for any 900MHz ...

AF-3340

Here we have some conductive ribbon. Essentially, it’s a fabric with 3 conductors woven into the ribbon. It measures roughly 0.2" wide and 0.03" th...

SF-DEV-10172

If this keyboard doesn't catch your eye, we don't know what will! It's cool, it's colorful, and it's clicky in the best way, and it'll make you fee...

AF-3398

Need an easy-to-use but powerful control solution for more industrial-type projects? Get the controller that does exactly what you want in a sturdy...

AF-3418

This is a conductive knit fabric for use in e-textiles. It is silver-plated nylon that is stretchy in both directions. It is highly conductive with...

SF-DEV-10070

This is a conductive knit fabric for use in e-textiles. It is similar in feel to a nylon ripstop material. It is highly conductive with a surface r...

SF-DEV-10056

This is a conductive knit fabric for use in e-textiles. It is silver-plated nylon that is stretchy in one direction. It is highly conductive with a...

SF-DEV-10055

"If there was a choice on spending a lot of money on accessories or dress, I always chose accessories." – Iris ApfelAnd how gorgeous are these enam...

AF-3493

"If there was a choice on spending a lot of money on accessories or dress, I always chose accessories." – Iris ApfelAnd how gorgeous are these enam...

AF-3494

"If there was a choice on spending a lot of money on accessories or dress, I always chose accessories." – Iris ApfelAnd how gorgeous are these enam...

AF-3495

This skill badge is for those who've mastered any of Altium's sophisticated PCB design platforms, such as CircuitStudio and Altium Designer. Design...

AF-3504

This is a medium size breadboard with 600 tie points. It has strong, self-adhesive backing. It is ideal for high frequency and low noise circuits....

DF-FIT0009

The color LCD skin is a module that fits right onto the pyboard. It provides a 160x128 pixel, 16-bit graphical LCD display with backlight, as well ...

AF-3498

This is the latest evolution of our serial LCD. Included on a single board is a 20x4 LCD and an embedded circuit based around a PIC 16F88. The on-b...

SF-LCD-09568

The HS-422 has been around for a while and for a good reason, durability and the ability to be easily modified. For inexpensive robotic applicat...

DF-SER0002

This DF05BB Pan and Tilt assembly for horizontal surface mount. Made using two DFRobot servo brackets. Perfect for your small remote piloted robot...

DF-FIT0045

DSS-P05 Standard Servo high torque servo, suitable for the production head, arm, biped robot, etc. Note: DF05BB has been replaced by DSS-P05...

DF-SER0020

We're no longer selling this pack of Trinket 3V+5V, we recommend our Trinket M0 which has better USB support, way faster processor, a ton more memo...

AF-1509

A high-power, reliable, USB 2.0 hub ideal for the Raspberry Pi® Fast, Fiesty and Fruity - Comes with a US-plug 5V 3A power supply, plenty of powe...

AF-1516

Make your next project super-flexy with a prototyping board that can twist and bend. We took our lovely classic perma-proto design and had it made ...

AF-1518

How many pockets does an OTG (On The Go) maker need to carry their boards, wires, miscellanea when away from their desk? The world may never know. ...

AF-3703

How many pockets does an OTG (On The Go) maker need to carry their boards, wires, miscellanea when away from their desk? The world may never know. ...

AF-3702

How many pockets does an OTG (On The Go) maker need to carry their boards, wires, miscellanea when away from their desk? The world may never know. ...

AF-3701

How many pockets does an OTG (On The Go) maker need to carry their boards, wires, miscellanea when away from their desk? The world may never know. ...

AF-3699

How many pockets does an OTG (On The Go) maker need to carry their boards, wires, miscellanea when away from their desk? The world may never know. ...

AF-3705

Remember when your NES would suddenly decide to scramble mid game? Creator Jeff Donaldson is a glitch art pioneer and creator of notendo. He's also...

AF-1517

Keep your 8mm LEDs in place with these little plastic LED holders. These are handy for projects using individual LEDs as they look sleek, and your ...

AF-2172

Keep your 5mm LEDs in place with these little plastic LED holders. These are handy for projects using individual LEDs as they look sleek, and your ...

AF-2175

Keep your 3mm LEDs in place with these little plastic LED holders. These are handy for projects using individual LEDs as they look sleek, and your ...

AF-2179

Keep your 8mm LEDs in place with these beautiful chromed metal LED holders. These are handy for projects using individual LEDs as they look sleek, ...

AF-2173

Keep your 5mm LEDs in place with these chromed metal LED holders. These are handy for projects using individual LEDs as they look sleek, and your L...

AF-2176

Keep your 5mm LEDs in place with these chromed metal LED holders. These are handy for projects using individual LEDs as they look sleek, and your L...

AF-2177

Keep your 5mm LEDs in place with these chromed metal LED holders. These are handy for projects using individual LEDs as they look sleek, and your L...

AF-2178

This motor has a long (0.365" or 9.27 mm), D-shaped metal output shaft that matches the Pololu wheel 42x19mm and 32x7mm. The brass faceplate has...

DF-FIT0094

This ATmega328 chip is Discontinued Now, We recommend another ATmega328 Chip with Arduino Bootloader as a suitable replacement. The name says ...

DF-DFR0113

This female to male DC power cable offers an easy solution for extending the length of a DC power supply. SPECIFICATIONS 2.1mm (0...

DF-FIT0114

This is a water proof push button with illuminator (LED). It is made by stainless steel with excellent quality. It comes at red illuminated r...

DF-FIT0115-R