Adafruit - Breakout Boards, Sensors, and Kits

This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 3.7W channels into 3 ohm impedance speakers. Inside the minia...

AF-987

The small 5mm size of these tin-plated brass snaps means they fit perfectly on Flora's pads! Snaps make a great connector for wearables-- solder on...

AF-1126

This knit conductive fabric is plated with real Silver and super luxe! Use small pieces on the tips of gloves or in any soft circuit situation wher...

AF-1167

Neat-freaks! Put down that toothbrush and pick up this nice ESD-safe cleaning brush! If you want to have a nice clean board (or maybe you're doing ...

AF-1209

Beguiled by a fancy new chip, regulator or transistor that is only available in a SOT23-3, SOT23-5, SOT23-6, SOT-223, SOT-89, or TO-252 pinout? Thi...

AF-1230

Upgrade your Hakko with a new tip, you'll get better & faster solder joints and the whole process will be much more enjoyable. This tip fits th...

AF-1250

These Italian-made Hakko pliers are excellent for any precision work. The nose is flattened and fairly short to provide excellent control. The insi...

AF-1368

This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI t...

AF-1480

What is this TRS bit? Turtle Rock Studios? Transmission Raman Spectroscopy? Not quite, more like Tip-Ring-Sleeve. This nifty, gold-plated connector...

AF-3692

A large-sized rechargeable battery pack for your Raspberry Pi (or Arduino, or Propeller, or anything else that uses 5V!). This pack is intended for...

AF-1566

We've got some awesome LED goggle tutorials, and now you want to make your own, right? So pick up a pair of NeoPixel rings and these costuming gogg...

AF-1577

These are the smallest NeoPixel breakouts around! Tiny, bright RGB pixels to your project. These little PCBs are only 8mm x 10mm and have two sets ...

AF-1612

What's smaller than a Feather but larger than a Trinket? It's an ItsyBitsy! Small, powerful, Arduino-compatible - this microcontroller board is per...

AF-3677

These pretty strips of light are plastic diffused backlights, often seen in LCD displays. Normally they're tucked behind the LCD and shine white li...

AF-1626

Add a power switch to any USB-powered project simply by plugging this between the USB power port and the USB cable. This is the most useful thing y...

AF-1620

Mary Poppins had her TARDIS-like carpet bag. 90s kids had their Pokémon card binders. But we have the next best thing: DiMeCard, a super-slim 8-pie...

AF-3664

This cyber-tronic looking sensor hides a secret behind it's glimmering eye. Unlike most temperature sensors, this sensor measures infrared light bo...

AF-1747

Adding shortening to a Pi makes it fatter - but this kind of shortening makes your Pi a little slimmer! This black short-style microSD adapter slid...

AF-1763

Make your own little LED strip arrangement with this stick of NeoPixel LEDs. We crammed 8 of the tiny 5050 (5mm x 5mm) smart RGB LEDs onto a PCB wi...

AF-1426

This switched JST connector is the best way to quickly prototype with our LiPoly batteries. We paired a genuine JST connector with a slide switch t...

AF-1863

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that...

AF-1875

This adapter board is designed for adapting a 'classic' 2x10 (0.1"/2.54mm pitch) JTAG cable to a slimmer 2x5 (0.05"/1.27mm pitch) SWD Cable.  It's ...

AF-2094

The first time you soldered up a surface mount component you may have been surprised "these are really small parts!" and there's dozens of differen...

AF-1554

This slim and modern potentiometer is small and compact, yet looks good and has a nice feel. We hand selected the best knobs for your project in di...

AF-2058

Wouldn't it be cool to drive a tiny OLED display, read a color sensor, or even just flash some LEDs directly from your computer?  Sure you can prog...

AF-2264

Ah the esteemed LD1117, who amongst us has not used this popular low drop voltage regulator? This big chunky regulator will help you get your 4-15V...

AF-2165

The "poor woman's" Raspberry Pi A+ / B+ / Pi 2 cobbler! This combo of 2x20 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable ...

AF-2270

This is a 4GB microSDHC card (SDC44GB) that comes with a SD adapter and is pre-programmed to contain the latest Raspberry Pi Linux distribution "Ra...

AF-1121

Is this not the cutest, little display for the Raspberry Pi? It features a 3.5" display with 480x320 16-bit color pixels and a resistive touch over...

AF-2441

The basic Adafruit VESA mount got a facelift!Introducing the Adafruit VESA Mount Plus for the Raspberry Pi 2 Model B, Model B+, and Model A+! Desig...

AF-2534

Listen to this good news - we now have a breakout board for a super tiny MEMS microphone. Just like 'classic' electret microphones, MEMS mics can d...

AF-2716

This 4" / 100mm long flexible uFL 2.4GHz antenna has approx 4DBi gain and a 50Ω impedance so it will work fantastically with just about any 2.4-2.5...

AF-2308

The premise of this MicroUSB Plug to 5.5/2.1mm Jack adapter is simple. There's a MicroUSB plug on one end and a 5.5mm/2.1mm DC barrel jack with cen...

AF-2727

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 use...

AF-2900

This cute little dongle is perfect for making your Raspberry Pi cable-free by adding WiFi. Take advantage of the Raspberry Pi's USB port to add a l...

AF-2810

This A/V RCA Cable for Raspberry Pi is a great way to turn your Pi 3, 2, A+ or B+'s output into a full on composite video and audio device.  Simply...

AF-2881