Adafruit - Breakout Boards, Sensors, and Kits

A switch is a switch, and an LED is an LED, but this LED illuminated button is a lovely combination of both! It's a medium sized button, large enou...

AF-1478

A switch is a switch, and an LED is an LED, but this LED illuminated button is a lovely combination of both! It's a medium sized button, large enou...

AF-1479

Connect to those pesky 0.5mm pitch connectors that you may run across with an FPC stick. We designed this for use in house, to quickly connect to 5...

AF-1492

Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil ...

AF-1512

Pici up this filament today! It'd be Fusilli not to buy this filament! We can't tagliatelle you enough about this filament. Are these puns Spirali-...

AF-3753

This brilliant invention is a blessing for makers designing or using boards with standard 2.1mm DC barrel jacks. Many devices opt against a proper ...

AF-3642

Praise the sun! You will never have that awkward situation where your caliper battery dies just when you need to take a measurement. Sure, if you h...

AF-3720

How many pockets does an OTG (On The Go) maker need to carry their boards, wires, miscellanea when away from their desk? The world may never know. ...

AF-3704

How many pockets does an OTG (On The Go) maker need to carry their boards, wires, miscellanea when away from their desk? The world may never know. ...

AF-3700

These Banana Plugs not only look great, they're also solder-free and stackable! Banana plugs are often used on test equipment, tools, synthesizers ...

AF-3694

You've done such a great job making your own electronic control panel that the last thing you need are those wires to get pulled out and frizzy. Th...

AF-3691

High-conductive heating fabrics are Literally! This non-woven fabric feels a little like felted paper but is filled with conductive material that c...

AF-3670

An exotic new microphone has arrived in the Adafruit shop, a PDM MEMS Microphone! PDM is the 'third' kind of microphone you can integrate with elec...

AF-3492

This RF adapter bit is great for anyone doing RF work. If your receiver/transmitter/transceiver has an MCX connector but you really want to tie it ...

AF-1532

If you want to heat sink a SoC, motor driver, linear regulator, FET or other surface-mount package part, you might find yourself struggling to find...

AF-1493

Poke and prod your electronics with a new 'scope probe. This is a classic probe, good quality and has a nice strong spring-clip and grounding clip....

AF-1528

OK, this item is pretty simple - it's a panel mount pushbutton. It's not that exciting, no LEDs, no bells & whistles. But we really like it any...

AF-1503

Create your own wireless Bluetooth keyboard controller in an hour with the Bluefruit EZ-Key: it's the fastest, easiest and bestest Bluetooth contro...

AF-1535

So, you want lots and lots of NeoPixels? And you want them for less? Not a problem! Here's a sheet of Breadboard-Friendly NeoPixel breakouts fresh ...

AF-1558

Getting touchy performance with your screen's touch screen? Resistive touch screens are incredibly popular as overlays to TFT and LCD displays. If ...

AF-1580

Note: This product is currently undergoing a revision and will be available again soon!We are excited to add another product to our growing Adafrui...

AF-1588

This Big Freaking Capacitor is just the trick when you have a lot of current sloshing around your project. They'll help smooth out voltage spikes b...

AF-1589

You take your soldering seriously, so you deserve a serious IC extractor tool. We purposefully never carried the cheap bent-sheet IC extractors, an...

AF-1598

This item is just for the Trellis driver PCB assembly: LEDs and buttons not included. Trellis is an open source backlight keypad driver system. It ...

AF-1616

These pretty strips of light are plastic diffused backlights, often seen in LCD displays. Normally they're tucked behind the LCD and shine white li...

AF-1621

These pretty strips of light are plastic diffused backlights, often seen in LCD displays. Normally they're tucked behind the LCD and shine white li...

AF-1622

Make a scrolling sign, or a small video display with this 8x8 gridded pure green LED matrix. Only 1.2" on a side, it is quite visible but not so la...

AF-1623

What's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix or a 4-digit 7-segment display. Matrices l...

AF-1633

Fancy new side light LED strips are a great alternative for folks who have loved and used Adafruit LED strips for a few years but want gorgeous, gl...

AF-3635

Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the...

AF-1602

If you already have a 7" TFT that is about 165mm x 105mm in size (with a visible area equal to or smaller than 152mm x 91mm), you can put this glas...

AF-1676

Bristlebots are small robots, great for teaching engineering, motors, circuits, and principles of balance. They don't require soldering or special ...

AF-3666

This handy bent-wire display stand was originally designed to hold up 7" tablets but the rubberized design is great for general purpose electronics...

AF-1679

A new collaboration between Adafruit & Micah from Scanlime, we are excited to introduce Fadecandy, a NeoPixel driver with built in dithering, t...

AF-1689

Add a glorious 2048x1536 retina-blasting, ultra-high pixel density, IPS display to any computer with a Thunderbolt/DisplayPort port. This product c...

AF-1652

After a long day out harvesting in the terminal block fields, we've returned with a veritable bounty of these very nice and compact 2.54mm/0.1" ter...

AF-2135

What's better than a single LED? Lots of LEDs! A fun way to make a small linear display is to use two 12-bar Bi-color bar-graphs. However, this LED...

AF-1721

The most useful tool we've ever laid our hands on. These calipers are really good quality and an excellent choice if you need something better than...

AF-1724

High above the canopy, with silent wings and much to see, owls observe with their keen eyes, the view below our midnight skies. They are also soooo...

AF-1728

This cyber-tronic looking sensor hides a secret behind its glimmering eye. Unlike most temperature sensors, this sensor measures infrared light bou...

AF-1748

This handy bent-wire stand was originally designed to hold tablets from 8-10 inches but the rubberized design is great for general purpose electron...

AF-1753

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wir...

AF-1883

This large (30mm diameter) piezo element is nicely enclosed with mounting holes so you can attach easily. Piezo elements convert vibration to volta...

AF-1739

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Displ...

AF-1645

An anemometer is a device used for measuring wind speed, and is a common weather station instrument. This well made anemometer is designed to sit o...

AF-1733

Now that you've finally got your hands on a Raspberry Pi® , you're probably itching to make some fun embedded computer projects with it. What you n...

AF-1754

Need some really bright LEDs? We are big fans of these 5mm clear UV / Purple LEDs. These emit UV 'blacklight' in the UVA spectrum so they are great...

AF-1793

Make your wearables glow with the GEMMA sequin pack! This GEMMA parts pack makes it easy to add light to your wearables. It comes with thread, need...

AF-1850