Adafruit - Breakout Boards, Sensors, and Kits

The eTape Liquid Level Sensor is a solid-state sensor with a resistive output that varies with the level of the fluid. It does away with clunky mec...

AF-464

A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. They're the same size as common a...

AF-476

Still searching for the Pi Zero enclosure that works for you? Try out this fully injection molded Raspberry Pi Zero case from ModMyPi! Designed to ...

AF-3288

A button is a button, and a switch is a switch, but this LED illuminated arcade buttons is in a class of its own. Its the same size as a 'standard'...

AF-492

Is your house haunted? Or, rather, are you convinced that your house is haunted but have never been able to prove it since you've never had a camer...

AF-3202

This is a fancy upgrade to standard 20x4 LCDs, instead of just having blue and white, or red and black, this LCD has full color RGB characters on a...

AF-498

Long gone are the days of parallel ports and serial ports. Now the USB port reigns supreme! But USB is hard, and you just want to transfer your eve...

AF-3309

This is a fancy upgrade to standard 20x4 LCDs, instead of just having blue and white, or red and black, this LCD has black characters on a full col...

AF-499

For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a res...

AF-3290

These panels come to us from Voltaic Systems, makers of fine solar-powered bags and packs. These are waterproof, scratch resistant, and UV resistan...

AF-500

You can use a multi-meter! Adafruit offers a fun and exciting "badges" of achievement for electronics, science and engineering. We believe everyone...

AF-502

This mini-kit makes it easy to mount a PSP/Xbox-like thumb joystick to your project. The thumbstick is an analog joystick - more accurate and sensi...

AF-512

PaPiRus Zero is an ePaper / eInk screen pHAT designed for the Raspberry Pi Zero. It’s one of the first true low power displays for the Pi Zero mini...

AF-3335

These LED panels take care of all the work of making a big matrix display. Each panel has six 8x8 red matrix modules, for a 16x24 matrix. The panel...

AF-555

Make your next audio input/output project in a box with this handy Panel Mount Stereo Audio Extension Cable - 1/8" / 3.5mm. OK its quite a mouthful...

AF-3319

A small, portable inverter for EL wire. Powers off of 4 AAA batteries (not included!), it can drive 3-4 meters (10 to 13 feet) of our high-brightne...

AF-564

These incredibly small surface-mount LEDs are an easy way to add a lot of very tiny (but bright!) colorful dots to your project. They're mini versi...

AF-3341

Pick up a super pack of our Perma-Proto PCBs, perfect for professional prototyping projects! This super pack contains 3 each of our 3 sizes - 9 PCB...

AF-591

Does this guy look familiar? Of course it does! It's our Black, 3-Layer Round Robot Chassis Kit from AdaBox002!This kit gives you everything you ne...

AF-3244

Add another 8 pins to your microcontroller using a MCP23008 port expander. The MCP23008 uses two i2c pins (these can be shared with other i2c devic...

AF-593

Do you need a solution for home automation, hydroponics, light industrial automation, and other related predicaments? Pimoroni's Automation pHAT – ...

AF-3352

A mini roll of thermal paper, this fits very nicely into our mini thermal printer. 2.25" wide (about 57mm) and 50 feet long (15 meters). BPA-free. ...

AF-599

Hit the ground running (and printing!) with this starter pack that includes a thermal printer and all the extras and save a few dollars while you'r...

AF-600

Connect two HDMI devices together with this basic HDMI cable. It has nice molded grips for easy installation, and is 1 meter long (about 3 feet). T...

AF-608

Repair or design your very own audio cables with these nice and durable phono-jack connectors. This is a great plug to make your own cable with. it...

AF-1799

This weatherproof camera module is a classy upgrade to the basic camera module we already stock in the shop. The main differences is that this one ...

AF-613

Give yourself some more room with an EL wire cable extender. This cable has a 2-pin JST SM plug on one end and receptacle on the other. Use it to e...

AF-616

Make a small linear display with a glowing pure-green color using this elegant LED bargraph. This pure-green color is much more vivid and closer to...

AF-1814

Make a small linear display with a glowing blue color using this elegant LED bargraph. Only 1" long, it is quite visible but not so large it wont p...

AF-1815

Make a small linear display with a glowing white color using this elegant LED bargraph. Only 1" long, it is quite visible but not so large it wont ...

AF-1816

This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a fairly standard linear taper 100K ohm potentiometer, with a grippy...

AF-1831

Listen up! This 1.5" diameter speaker cone is the perfect addition to any audio project where you need an 8Ω impedance and are using 0.25W of power...

AF-1891

Get glowing in seconds with our Electroluminescent (EL) Panel Starter Pack! This pack contains everything you need for your first EL panel project,...

AF-639

Make a scrolling sign, or a small video display with this 8x8 gridded yellow LED matrix. Only 1.2" on a side, it is quite visible but not so large ...

AF-1819

Do you have a display, television, projector or some other older device that isn't compatible with your HDMI devices? Here's an adapter that will a...

AF-3365

A perfect match for our sew-able coin cell holder. This non-rechargeable coin cell is CR2032 sized: 20mm diameter, 3.2mm thick. It has a nominal vo...

AF-654

What's better than a single LED? Lots of LEDs! Matrices like these are 'multiplexed' - so to control 64 LEDs you need 16 pins. That's a lot of pins...

AF-1857

This 2.2"/57mm long antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless re...

AF-1858

FRAM, or Ferroelectric Ram, is the coolest new data storage method that all the fashion magazines are talking about. Oh wait, no that's quilted han...

AF-1897

1Sheeld+ is a "Bluetooth LE Tethered" shield for Arduino. Plug it into your Arduino and then run the matching mobile app on your tablet or phone. O...

AF-3408

EL Wire, also known as Electroluminescent wire is a stiff wire core coated with phosphor and then covered with a protective PVC sheath. When an AC ...

AF-675

This here is a handy A male to A female USB extension cable.This handy USB extension cable will make it easy for you to extend your USB cable when ...

AF-3419

Ever wanted your microcontroller to sense images without eating up all your processor speed? Or wish that you had an image sensor that wasn't limit...

AF-1906

These surface-mount LEDs are an easy way to add a lot of bright white dots to your project. They're similar to the ones in our digital RGB LED stri...

AF-682

Repair or design your very own audio cables with these nice and durable phono-jack connectors. This is a great jack to make your own 1/4" stereo ca...

AF-1804

Playing retro games is easy on a Raspberry Pi - and that pocket-sized computer is pretty good at it too! All you need is a little help to connect b...

AF-3422

Turn any surface/wall/table etc into a speaker with a surface transducer. This type of speaker does not have a moving cone like most speakers you'v...

AF-1784

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is a nice,...

AF-1911