Adafruit - Breakout Boards, Sensors, and Kits

What is this, an open boxcar for train traveling ants? It's actually a PCB-or-really-anything holder for all the makers and designers who use DIN r...

AF-4435

If you have any LEGO Mindstorm or EV3 sensors/motors/controllers you probably noticed the phone-cable-like connectors that are used to go from acce...

AF-4434

This one's going out to all the makers and designers who use DIN railing in their builds. This adapter plate is perfect for simplifying complex wir...

AF-4436

This simple Smoke Snap-on Case is both good looking and tough enough to toss into your bookbag or toolbox. It has slim cut-outs for your cable and ...

AF-4487

Reinvented Inc. is a 501(c)(3) nonprofit organization that aspires to break barriers and aid the movement to get more girls involved in STEM by cre...

AF-4495

Looking for something for the little engineer in your life? The Makedo Cardboard Construction Mini-Kit is a perfect complement to the Makedo Toolki...

AF-4476

Wow did you hear about that new sequel coming out? No, no, not The Matrix 4 – it's The Art of Electronics - X Chapters! More delicious, practical e...

AF-4360

Build your own home-brew iPod with Pimoroni's Pirate Audio Headphone Amp! It's an all-in-one solution, with gorgeous album art display, track info,...

AF-4454

Deep learning networks are getting smaller. Much smaller. The Google Assistant team can detect words with a model just 14 kilobytes in size—small e...

AF-4526

How high are you right now? If you had a precision altitude sensor, you would know for sure! The DPS310 sensor from Infineon a high precision barom...

AF-4494

HackSpace Magazine is the monthly magazine for the modern maker! Issue #25 highlights the best toys, tools, and trinkets for your hacker Christmas ...

AF-4501

Make your own smart LED arrangement with the same integrated LED that is used in our NeoPixel strip and pixels. This tiny 1515 (1.5mm x 1.5mm) RGB ...

AF-4492

The SparkFun Qwiic FeatherWing (Shield for Thing Plus) provides an easy-to-assemble way to add the STEMMA QT / Qwiic connect ecosystem to any devel...

AF-4515

If you'd like a compact color display, with buttons and a joystick - we've got what you're looking for. The Adafruit 1.3" Color TFT Bonnet for Rasp...

AF-4506

Are you a maker in the midst of a STEMMA dilemma? This 100mm long cable is a fantastic chimera-cable fitted with STEMMA QT / Sparkfun Qwiic JST SH ...

AF-4528

The SparkFun Qwiic Adapter can make any old I2C board or sensor a STEMMA QT / Qwiic-enabled one. This adapter breaks out the I2C pins from the JST ...

AF-4527

The RockBLOCK 9603 Accessory Cable is terminated with a simple 10-pin Molex-style connector at one end and male jumper wires at the other.This acce...

AF-4529

The RockBLOCK 9603 allows you to send and receive short messages from anywhere on Earth with a clear view of the sky. And when we say anywhere we m...

AF-4521

If you missed out on ADABOX 014, its not too late for you to pick up the parts necessary to build many of the projects! This kit pack doesn't come ...

AF-4504

As technology changes and adapts, so does Adafruit. This  USB Type A to Type C cable will help you with the transition to USB C, even if you're sti...

AF-4472

As technology changes and adapts, so does Adafruit. This  USB Type A to Type C cable will help you with the transition to USB C, even if you're sti...

AF-4472

As technology changes and adapts, so does Adafruit. This  USB Type A to Type C cable will help you with the transition to USB C, even if you're sti...

AF-4474

This Blue Octagon Chassis makes for an excellent robot body that's easy to machine and modify. It's a single piece of 4mm thick plastic, with a var...

AF-4466

MikroElektronika's Feather Click Shield will expand your Feather projects to "fly" with more than 750 Click boards available from MikroE. This cote...

AF-4496

These premium male-male jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They're 200mm (~7.8") long and come ...

AF-4482

Run two solenoids, or a single DC motor with up to 800mA per channel using the super-simple L9110H H-bridge driver. This bridge chip is an 8 DIP pa...

AF-4489

This simple but effective enclosure will fit any 'classic Arduino' shaped development board - we've tested it with the Arduino UNO R3, Adafruit Met...

AF-4490

This anti-static work mat is great for electronic work and repair, especially delicate or ESD sensitive work. It's 2mm thick and has a very high-re...

AF-4405

Sometimes you need to sense pressure in a damp or caustic environment. And sometimes you need to know the relative changes in pressure as well as t...

AF-4414

SPRESENSE is a low-power board computer for the IoT that is equipped with a GPS receiver and supports High-Resolution Audio codecs. The board allow...

AF-4420

This is a screen for advanced hackers who like the look of the TFT screen we've put into the Adafruit CLUE and Adafruit Mini PiTFT 1.3". The 1.3" d...

AF-4520

Feather is the new development board from Adafruit, and like its namesake, it is thin, light, and lets you fly! We designed Feather to be a new sta...

AF-2598

Easy e-paper finally comes to your Feather with this Adafruit EInk Feather Friend that's designed to make it a breeze to add an eInk display. Chanc...

AF-4446

Automate your own adorable, IoT-enabled papier-mâché house. The small size of this build lets us explore wiring, user interaction, and firmware dep...

AF-4450

The Pi Supply Bit:Buggy Car is a small and cute DIY smart car based around the BBC micro:bit. It's a simple but well-designed lil robot car and is ...

AF-4442

These iridescent silver-bluish-purple sequins can be used for a variety of maker projects for some shimmery wintery glitz. Also perfect as snowflak...

AF-4439

If you're a DIY enthusiast who'd like to update your project's connection to the latest USB standard, here is a 10-pack of USB C jack connectors! T...

AF-4458

Need directions to your nearest dry cleaner? Or maybe you need to send a hands-free email? Perhaps you just want to know what the weather's like in...

AF-4427

Extend and expand your Circuit Playground projects with a bolt on E-Ink Gizmo that lets you add a lovely tri-color e-Ink display in a sturdy and re...

AF-4428

Say hello to our 1.14" 240x135 Color TFT Display w/ MicroSD Card Breakout – we think it's T-F-Terrific! It's the size of your thumbnail, with glori...

AF-4383

We have all sorts of LED strips for a wide range of needs. Chonky strips? We got those! Strips with alligator clips that are easy-peasy to MakeCode...

AF-4368

This is a STEMMA I2C breakout for the Infineon OPTIGA TRUST M SLS 32AIA.OPTIGA Trust M is the next generation of Trust X. OPTIGA Trust M brings RSA...

AF-4351

Trends come and go, but preparedness is always in fashion! Have you ever been in a situation where you desperately needed a screwdriver right away?...

AF-4373

The Pimoroni Picade Cabinet is a stylish, retro, and fun arcade cabinet for your Raspberry Pi!The Picade Cabinet comes in kit form for you to build...

AF-4334

Looking for a way to keep your Raspberry Pi 4 running cool and also look cool? We've got a two-birds-one-stone solution for you. This enclosure kit...

AF-4341

Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit Playgro...

AF-2599

If Adafruit were a manga, it would definitely look like this. Wow, wouldn't that be mega-sugoi? Ladyada-sensei, notice me! It's difficult not to fe...

AF-4024

Ready Players 1 and 2? Double up on your MakeCode gaming with a Sync Cable! We got this Micro B USB to Micro B USB cable specially made to connect ...

AF-4342