Adafruit - Breakout Boards, Sensors, and Kits

This Mini Illuminated Momentary Power Button is an adorable breadboard-friendly tactile switch that has a built-in LED. It provides a simple way to...

AF-3105

Crank up your robotics with powerful Adafruit DRV8871 motor driver breakout board. This motor driver has a lot of great specs that make it useful f...

AF-3190

When you need to switch a lot of power, N channel MOSFETs are best for the job. These FETs can switch over 60A and 30V and are TO-220 package so th...

AF-355

These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboar...

AF-374

The tiny little LiPo/LiIon power supply shim for all versions of the Raspberry Pi! We love mobile projects but having a discrete, slick, and tidy ...

AF-3196

Here's a handy Arduino shield: we've had a lot of people looking for a dedicated and well-designed data logging shield. We worked hard to engineer ...

AF-1141

Are you still looking for that perfect PCB holder? The low profile PCB Stickvise might be just the thing you need!In performing the simple task of ...

AF-3197

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference, as well as calculations to handle any non-linearit...

AF-3263

Spin two DC motors or step one bi-polar or uni-polar stepper with up to 1.2A per channel using the DRV8833. This motor driver chip is a nice altern...

AF-3297

One can never have enough socks, or USB ports. Add some more USB capability to your Raspberry Pi Zero with the Zero4U!This is a 4-port USB hub for ...

AF-3298

Make your Arduino-based project tiny and with the Adafruit METRO Mini! The METRO Mini works great with the Arduino IDE, and runs the ATmega328P at ...

AF-2590

For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a res...

AF-3328

Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularl...

AF-3351

Listen up! This tiny 1" diameter speaker cone is the perfect addition to any small audio project where you need an 8 Ω impedance and will be using ...

AF-1890

After months of searching, we finally have what we consider to be the ultimate conductive thread. It's thin, strong, smooth, and made completely of...

AF-640

Add some crisp and compact audio to your project with this Mini External USB 2.0 Speaker. It's USB-only and does not require or use a 3.5mm audio j...

AF-3369

This is the FeatherWing Tripler - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are t...

AF-3417

We love all our Feathers equally, but this Feather is very special. It's our first Feather that is specifically designed for use with CircuitPython...

AF-3403

Need some really bright LEDs? We are big fans of these clear white LEDs, in fact we use them exclusively in our kits. They are very bright and have...

AF-754

LOLwut? NeoPixels in 5mm through-hole variety? Oh yes, we haz them! If you like NeoPixel strips you'll luv these 5mm diffused through-hole NeoPixel...

AF-1938

The British Invasion is here! No, not music...microcontrollers! New to Australia is the newest and easiest way to learn programming and electronics...

AF-3362

This tiny coin cell battery holder is ideal for small portable or wearable projects. It holds two 20mm coin cells (2032 are the most popular size) ...

AF-783

This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a log taper 10K ohm potentiometer, with a grippy shaft. It's smooth ...

AF-3391

That's one slim cellular antenna! At just 75mm long from tip to tip and and with a thickness of just 2mm, this 3dBi GSM antenna is slim, compact an...

AF-1991

This is a great first stepper motor, good for small projects and experimenting with steppers. This uni-polar motor has a built in mounting plate wi...

AF-858

Is the flex cable for your Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display too short? Or maybe it's cluttering your w...

AF-2087

This handy USB extension cable will make it easy for you to enclose a device that has a A type (USB host) port. We think this would be most handy w...

AF-908

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of ...

AF-3550

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of ...

AF-3556

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of ...

AF-3557

It's half USB Key, half Adafruit Trinket...it's Neo Trinkey, the circuit board with a Trinket M0 heart and  four RGB NeoPixels for customizable glo...

AF-4870

This simple development board for the STM32F411 is a great way to add a powerful STM chip to your next project. Featuring the STM32F411CEU6, this c...

AF-4877

The Adafruit AS7341 10-Channel Light / Color Sensor Breakout is a multi-channel spectrometer, which is a special type of light sensor that is able ...

AF-4698

A strain gauge is a type of electronic sensor used to measure force or strain (big surprise there). They are made of an insulating flexible backing...

AF-4543

The Adafruit Feather Bluefruit Sense takes our popular Feather nRF52840 Express and adds a smorgasbord of sensors to make a great wireless sensor p...

AF-4516

ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!This is a 25 Pack of 1.0...

AF-4294

The Raspberry Pi 4 Model B is the newest Raspberry Pi computer made, and the Pi Foundation knows you can always make a good thing better! And what ...

AF-4296

Give your Feather project a lift with the Adafruit AirLift FeatherWing - a FeatherWing that lets you use the powerful ESP32 as a WiFi co-processor....

AF-4264

If you need to add a panel-mount connection for USB Micro B,  but don't have the time or ability to cut a custom oval or square hole, this Round Pa...

AF-4217

As technology changes and adapts, so does Adafruit! Rather than the regular USB A, this cable has USB C to USB C plugs!USB C is the latest industry...

AF-4199

This product is really annoying to have to write a description for because it's really something you have to touch to understand! Instead of a hard...

AF-4183

With our fun assortment of conductive materials, cosplay and wearables have never been easier to craft! This Conductive Nylon tape goes great with ...

AF-3960

Feather is the flagship development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new...

AF-3046

You thought it couldn't get better than our world-famous 32-LED-per-meter Digital LED strip but we will prove you wrong! These NeoPixel strips have...

AF-1460-2552

You thought it couldn't get better than our world-famous 32-LED-per-meter Digital LED strip but we will prove you wrong! You wanted twice the LEDs?...

AF-1461-2508

This handy Ethernet extension cable will make it easy for you to enclose a device that has an Ethernet port. We think this would be most useful whe...

AF-909

These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x32 ind...

AF-931