Products

1M5 Specifications Resistance level 1.5MΩ resistance toler...

TB-RR1652

1M5 Specifications Resistance level 1.5MΩ resistance toler...

TB-RR2850

Our heatshrink is flexible and made from flame-resistant polyolefin. - Made to UL224 E180908 125°C. - It shrinks to 50% of its si...

TB-WH5530

Our heatshrink is flexible and made from flame-resistant polyolefin. - Made to UL224 E180908 125°C. - It shrinks to 50% of its si...

TB-WH5560

Our heatshrink is flexible and made from flame-resistant polyolefin. - It shrinks to 50% of its size. - Shrink with a heatgun, ha...

TB-WH5550

High quality Goot brand Gootwick, made in Japan.- Contains wash- free RMA flux and conforms to MIL-F-14256F. Supplied in plastic reels. ...

TB-NS3026

Our heatshrink is flexible and made from flame-resistant polyolefin. - Made to UL224 E180908 125°C. - It shrinks to 50% of its si...

TB-WH5510

Our heatshrink is flexible and made from flame-resistant polyolefin. - Made to UL224 E180908 125°C. - It shrinks to 50% of its si...

TB-WH5540

Our heatshrink is flexible and made from flame-resistant polyolefin. - Made to UL224 E180908 125°C. - It shrinks to 50% of its si...

TB-WH5570

Our heatshrink is flexible and made from flame-resistant polyolefin. - Made to UL224 E180908 125°C. - It shrinks to 50% of its si...

TB-WH5590

Miniature Polyester Capacitor Metallised polyester capacitors are used in applications that require long term stability at a relatively...

TB-RM7015

Polyester capacitors offer good stability, a large range of values at low cost, and the most widely used capacitor for general purpose. ...

TB-RG5015

A ceramic capactior is a fixed-value capactior in which ceramic material acts as the dielectric. It is constructed of two or more alternati...

TB-RC5302

Miniature Polyester Capacitor Metallised polyester capacitors are used in applications that require long term stability at a relatively...

TB-RM7172

Polyester capacitors offer good stability, a large range of values at low cost, and the most widely used capacitor for general purpose. ...

TB-RG5172

These RT (axial) non polar capacitors are ideal for high quality crossovers. They offer excellent audiofrequency characteristics and are ra...

TB-RY6951

Tantalum capacitor thru-hole. Resin-dipped case.  Specifications Capacitor type ...

TB-RZ6630

85ºC rated Leakage characteristics similar to tantalum caps, but at a lower price. An electrolytic capacitor uses and electrolyte (a li...

TB-RL6418

Features: - Colour coded - Temperature rise 20°C. - Rated temperature rise -20°C to +80°C - Dielectric withstanding voltag...

TB-LF1512

Ready to use with pre-soldered anode and cathode with 5 inch wires.  Great for DIY projects!Operating Voltage:1.5VCurrent:400mAPeak Power:0.65WDime...

LB-SOLAR

Experiment with solar energy - the energy source of the future. This hobby solar cell module is so small, it could easily be used in your n...

TB-ZM9015

A large range of various sizes and voltages of mini lamps. Supplied with wiring cable pre-connected. LARGE SIZE White 1.5v: SL2670 ...

TB-SL2670

SMALL SIZE Globe size A large range of various sizes and voltages of mini lamps. Supplied with wiring cable pre-connected. 1.5V Whi...

TB-SL2680

This solar panel is made of single-crystal material that performs high solar energy transformation efficiency at 17%. It has a fine resin surfac...

SS-313070002

This small 1.6” LCD screen with backlight supports a resolution of 84 * 48 and is compatible with Raspberry Pi 2B/3B/3B+/4B.Through the internal pr...

DF-DFR0832

These fuses are used in microwave ovens and precision equipment. They are fast acting and rapidly respond to a fault condition. They are sa...

TB-SF2106

1.6A M205 Ceramic Fuses - Slow Blow

TB-SF2116

- (5 x 20mm) - 1.6A

TB-SF2161

1K6 1/2W -  Same size as standard 1/4W carbon film.  Specifications Resistance level ...

TB-RR0577

1.6mm 2 pole power cable terminal. Suitable for DC power supplies. Specifications Inner Diameter ...

TB-PP0508

These wheels are designed to work with the Pololu 120:1 mini plastic gearmotors (offset output and 90-degree output) and the Solarbotics GM6 a...

PL-191

These wheels are designed to work with the Pololu 120:1 mini plastic gearmotors (offset output and 90-degree output) and the Solarbotics GM6 a...

PL-190

This is 1.75mm (0.07") PLA filament which is commonly used by reprap, Makerbot, Mendel, Huxley UP! Printer, WeisTek and Thing-o-matic 3D printers....

DF-FIT0292-BE

This is 1.75mm (0.07") PLA filament which is commonly used by reprap, Makerbot, Mendel, Huxley UP! Printer, WeisTek and Thing-o-matic 3D printers....

DF-FIT0531-B

This is 1.75mm (0.07") PLA filament which is commonly used by reprap, Makerbot, Mendel, Huxley UP! Printer, WeisTek and Thing-o-matic 3D printers....

DF-FIT0531-G

This is 1.75mm (0.07") PLA filament which is commonly used by reprap, Makerbot, Mendel, Huxley UP! Printer, WeisTek and Thing-o-matic 3D printers....

DF-FIT0531-R