Products

Use this module to generate sound from your Arduino; libraries are available to produce different tones and frequencies. •    Acti...

TB-XC4424

Using a MQ series gas sensor, this module easily adds alcohol detection to your project. An analogue output can be used to monitor changes ...

TB-XC4540

Do you want to communicate wirelessly with your DuinoTECH project, but don’t want the hassle of configuring RF modules? Well this module with Blue...

TB-XC4382

As Bluetooth® standards improve, and with iOS reducing support for the SPP protocol, thisXC-4382 Bluetooth Module brings the latest Bluetoo...

TB-XC4382

Receiving power from a USB socket or DC socket, this module adds a compact power supply to your breadboard. Features: * Plugs strai...

TB-XC4606

Mid-sized prototyping breadboard with 400 tie points. * 300 tie points in centre section * 100 tie points on power rails ...

TB-PB8820

With labeled rows and columns and adhesive back for mounting, it is ideal for electronic prototyping and Arduino projects. Features: ...

TB-PB8815

Extremely easy to set up. Use this data logging shield to store your data to files on any FAT16 or FAT32 formatted SD card, or have it to b...

TB-XC4536

This module accepts any voltage from 4.5-35VDC, and outputs any lower voltage from 3-34V. Output is adjusted via a multi-turn potentiometer...

TB-XC4514

The Arduino compatible boost module can be used to provide higher voltages for your project, such as running 5V Arduino projects from Lithi...

TB-XC4609

The popular HC-SR04 ultrasonic distance module provides an easy way for your DuinoTECH to measure distances up to 4.5m. Use it to add obsta...

TB-XC4442

Looking to get into Arduino® but don't know where to start? We have specially selected the components in this kit to allow an easy entry in...

TB-XC3900

A compact ATMega 32U4 based main board designed with portability in mind. Just like the Leonardo, a single chip handles main controller fun...

TB-XC4620

Using the powerful ESP8266 IC, the ESP-13 Wifi Shield adds much more than just plain wifi to your Arduino. It has an 80MHz processor and ca...

TB-XC4614

Sense magnetic presence, rotating wheels and magnets, door sensors and any other magnets near this device. •    Output turns on at...

TB-XC4434

Receive data sent via infrared, this module can read the signals sent by most IR remote controls. Pair it with the TX Module (XC-4426) to m...

TB-XC4427

Use this device to send data over infrared. Use your Arduino to control your TV or Media Centre. Combine it with our RX module (XC-4427) an...

TB-XC4426

This module is an inexpensive solution for an obstacle avoidance sensor, perfect for robotic projects and very easy to interface directly w...

TB-XC4524

This module measures the reflectivity of a surface with an infrared emitter/detector pair. The output goes to high whenever the reflectivit...

TB-XC4474

This tiny module charges a single lithium cell from a 5V supply. Ideally paired with XC-4512 DC-to-DC Converter Module to create a device t...

TB-XC4502

While most of the modules used in the Arduino® world are 5V logic, some are 3.3V. And unfortunately, connecting them directly often results...

TB-XC4486

The Arduino Compatible Long Range LoRa shield turns your Arduino into a LoRa node capable of transmitting and receiving data over long dist...

TB-XC4392

Our range would not be complete without a microphone sensor module. This unit is highly sensitive with the added advantage of having two ou...

TB-XC4438

With self-adhesive tape on the back, ideal for DIY projects including Arduino®. It has 17 holes x 10. Total 170 holes. It can also be perma...

TB-PB8817

A tiny Arduino compatible 128 x 64 pixel OLED display. Monochrome graphics with wide viewing angle and I2C interface.  * ...

TB-XC4384

This versatile board has 2 x 5V servo ports connected to the Arduino's high-resolution dedicated timer to ensure jitter-free operation. It ...

TB-XC4472

A full featured MP3 module that supports both playback and recording. An onboard microphone is used for audio in, and a 3.5mm jack provides...

TB-XC4516

Measure light levels with this sensor module. This module uses a light dependant resistor to produce an output voltage that varies with lig...

TB-XC4446

A pyroelectric infrared PIR motion sensor is a handy addition to any Arduino® project. Wide operating range and delay times changeable via ...

TB-XC4444

This stackable shield makes semi-permanent prototyping simple. When you want something more permanent than a breadboard, but don’t want to ...

TB-XC4482

Add another dimension to your Arduino weather project. This compact module can be used to detect rain, and can be separated into a sensor a...

TB-XC4603

This tiny little module will keep accurate time using a button battery; the CR2032 battery is easily replaceable. Great to use with all of ...

TB-XC4450

Add sound to your Arduino without the complexity of MP3 modules and SD cards, using the ISD1820 based Record and Playback Module. Includes ...

TB-XC4605