Products

These are the superb looking rocker switches that you have seen in the cockpits of the 70-100ft luxury motor cruisers recently. They would...

TB-SK0928

These are the superb looking rocker switches that you have seen in the cockpits of the 70-100ft luxury motor cruisers recently. They would...

TB-SK0922

These are the superb looking rocker switches that you have seen in the cockpits of the 70-100ft luxury motor cruisers recently. They would...

TB-SK0921

These are the superb looking rocker switches that you have seen in the cockpits of the 70-100ft luxury motor cruisers recently. They would...

TB-SK0925

These are the superb looking rocker switches that you have seen in the cockpits of the 70-100ft luxury motor cruisers recently. They would...

TB-SK0924

These are the superb looking rocker switches that you have seen in the cockpits of the 70-100ft luxury motor cruisers recently. They would...

TB-SK0923

The SCD30 from Sensirion is a high quality Nondispersive Infrared (NDIR) based CO₂ sensor capable of detecting 400 to 10000ppm with an accuracy of ...

SF-SEN-15112

The SCD30 from Sensirion is a high quality NDIR based CO₂ sensor capable of detecting 400 to 10000ppm with an accuracy of ±(30ppm+3%). In order to ...

SF-SPX-14751

This USB-to-serial adapter is a breakout board for the Silicon Labs CP2102N USBXpress USB-to-UART bridge, and it is a great solution for connecting...

PL-1317

Overview CP2104 USB-to-serial adapter carrier, bottom view with dimensions. This USB-to-serial adapter is a breakout board for the Silicon Lab...

PL-1308

Overview The ATF16V8B is a high-performance CMOS (electrically erasable) programmable logic device (PLD) that utilizes Atmel’s proven electrically-...

IT-IM130307010

CPLD/FPGA - EPCS16SI16N

IT-IM130307019

Overview With SRAM-based devices that support active serial configuration, configuration data must be reloaded each time the device powers up, the ...

IT-IM130307011

Overview With SRAM-based devices that support active serial configuration, configuration data must be reloaded each time the device powers up, the ...

IT-IM130307007

CPLD/FPGA - EPM1270T144C5N

IT-IM130307015

CPLD/FPGA - EPM240T100C5N

IT-IM130307009

Overview MAX 3000A devices are low–cost, high–performance devices based on the Altera MAX architecture. Fabricated with advanced CMOS technology, t...

IT-IM130307014

Overview MAX 3000A devices are low–cost, high–performance devices based on the Altera MAX architecture. Fabricated with advanced CMOS technology, t...

IT-IM130307008

CPLD/FPGA - EPM570F256C5N

IT-IM130307018

CPLD/FPGA - EPM570T100C5

IT-IM130307012

Overview The MAX 7000 family of high-density, high-performance PLDs is based on Altera’s second-generation MAX architecture. Fabricated with advanc...

IT-IM130307017

Overview The MAX 7000 family of high-density, high-performance PLDs is based on Altera’s second-generation MAX architecture. Fabricated with advanc...

IT-IM130307016

Overview The GAL16V8, at 3.5 ns maximum propagation delay time, combines a high performance CMOS process with Electrically Erasable (E 2 ) floating...

IT-IM130307013

CPLD/FPGA - GAL16V8D-25LP

IT-IM130307021

Overview The is pMACH 4000 devices consist of multiple 36-input, 16-macrocell Generic Logic Blocks (GLBs) interconnected by a Global Routing Pool (...

IT-IM130307020

Popular solder-in PCB mounting type batteries. Full Capacity in any Position. Pre tinned Terminals. All are 3V. ...

TB-SB1760

Twin cell pack, commonly used in cameras. Specifications DC Voltage 6V ...

TB-SB2401

These are the highest quality & capacity batteries, the same as shipped with the iCufflinks, iNecklace, Datalogging and GPS Shields, GPS HAT, e...

AF-380

3v lithium non rechargeable button battery. Specifications DC Voltage 3V Height 2mm Diameter 12mm Battery Chemical Composition Lithium S...

TB-SB2527

Overview It is suitable for one piece CR1220 lithium coin cell battery. Surface Mount(SMT). Specification Contact current rating: 3 ampere Dielect...

IT-IM120803017

Overview It is suitable for one piece CR1220 lithium coin cell battery. Surface Mount(SMT). Specification Contact current rating: 3 ampere Dielect...

IT-IM120803018

3v CR123A battery for use in cameras. Specifications DC Voltage 3V ...

TB-SB2400

This is a Li-ion Battery Holder specially designed for micro: bit educational robot Maqueen. It can be used to hold a CR123A 3.6V lithium rechargea...

DF-FIT0611

This is a Li-ion Battery Holder specially designed for micro: bit educational robot Maqueen. It can be used to hold a CR123A 3.6V lithium rechargea...

DF-FIT0611

3v lithium non rechargeable button battery. Specifications DC Voltage 3V ...

TB-SB2525

3v lithium non rechargeable button battery. Specifications DC Voltage 3V ...

TB-SB2526

3v lithium non rechargeable button battery. Specifications DC Voltage ...

TB-SB2529

CR2 battery, commonly used in camera applications. Specifications DC Voltage ...

TB-SB2404

3v lithium non rechargable button battery. Specifications DC Voltage 3V ...

TB-SB2524

This is a handy little non-rechargeable CR2016 Lithium Coin Cell Battery!Sitting at 20mm diameter and is 1.6mm thick it's small but packs a punch w...

AF-2849

3v lithium non rechargeable button battery. Specifications DC Voltage 3V Height 2.5mm Diameter 20mm Battery Chemical Composition Lithium...

TB-SB2520

3v lithium non rechargable button battery. Specifications DC Voltage 3V ...

TB-SB2522

CR2032 Button Cell Battery - Great for use with the Lilypad Switch Battery Holder

LB-00081

A perfect match for our sew-able coin cell holder. This non-rechargeable coin cell is CR2032 sized: 20mm diameter, 3.2mm thick. It has a nominal vo...

AF-654

*User replaceable. *Full capacity in any position. *Pre tinned terminals. Specifications ...

TB-SB1762