Products

This “non-boosted” servo extension board allows up to four different servos to be plugged into it and transfer data up to through a common CAT6 cab...

SF-ROB-12176

Stretch out your servo connections with this flexible servo extension cord. It has a 3 pin shrouded "male" connection to plug your servo into and t...

AF-972

Stretch out your servo connections with this flexible servo extension cord. It has a 3 pin shrouded "male" connection to plug your servo into and t...

AF-973

This is a 12 inch servo extension cable that comes in handy when your servo is further away from the controller than the wire on the servo allows. ...

SF-ROB-15808

This servo extension cable has female JR connectors on both ends, so it can be used to make connections between devices with 0.1" 3-pin male heade...

PL-780

Note: This servo cable has been replaced by a new version that has male and female ends that are compatible with both Futaba and JR connectors. T...

PL-786

This servo extension cable has three 22-AWG wires joining a male Futaba J connector and a female JR connector. Since a female JR connector can be...

PL-2184

This is a 150mm (5.91") servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the s...

DF-FIT0296

This servo extension cable has female JR connectors on both ends, so it can be used to make connections between devices with 0.1" 3-pin male heade...

PL-785

Discontinuation Notice: This product has been discontinued. Please consider our servo extension cable as alternative. This servo extension cable...

PL-787

This servo extension cable has three 22-AWG wires joining a male Futaba J connector and a female JR connector. Since a female JR connector can be...

PL-2185

This is a 300mm servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo a...

DF-FIT0033

Connects to standard hobby servos and extends their cable length by 300mm, using standard Futaba style male and female connectors. This is a high-...

FT-EXT300

This servo extension cable has female JR connectors on both ends, so it can be used to make connections between devices with 0.1" 3-pin male heade...

PL-779

This is a 600mm (23.62") servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on th...

DF-FIT0297

Connects to standard hobby servos and extends their cable length by 600mm, using standard Futaba style male and female connectors. This is a high-...

FT-EXT600

The MonkMakes Servo for micro:bit board provides a really easy way to attach up to three servomotors to a BBC micro:bit. The board requires a power...

MM-SKU00073

These servo gears are made specifically to fit a Futaba 3F servo spline, allowing you to mate other gears to your servo. They have 16 teeth with a ...

SF-ROB-12440

These servo gears are made specifically to fit a Futaba 3F servo spline, allowing you to mate other gears to your servo. They have 20 teeth with a ...

SF-ROB-12184

These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 12 teeth with a g...

SF-ROB-12258

These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 16 teeth with a g...

SF-ROB-12389

These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 20 teeth with a g...

SF-ROB-12142

These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 24 teeth with a g...

SF-ROB-12341

These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 32 teeth with a g...

SF-ROB-12231

Horn for MG-995 servo,screws included.  

SS-MOT112E2M

These lightweight servo hubs are ideal for attaching wheels, gears, or any heavy duty servo horns directly to your 3F Futaba servo spline. These al...

SF-ROB-12291

These lightweight servo hubs are ideal for attaching wheels, gears, or any heavy duty servo horns directly to your C1 Hitec servo spline. These alu...

SF-ROB-12543

These hubs are ideal for attaching wheels, gears, or any heavy duty servo horns directly to your 3F Futaba servo spline. These aluminum servo hubs ...

SF-ROB-12274

These hubs are ideal for attaching wheels, gears, or any heavy duty servo horns directly to your C1 Hitec servo spline. These aluminum servo hubs h...

SF-ROB-12443

These hubs are perfect for running a hub through a ServoBlock Kit that is directly to your 3F Futaba servo spline. These aluminum servo hubs have a...

SF-ROB-12480

These hubs are perfect for running a hub through a ServoBlock Kit that is directly to your C1 Hitec servo spline. These aluminum servo hubs have a ...

SF-ROB-12227

DescriptionSERVO is made to implement the bestest, easiest way to drive Servo motors. This M5 module will make quick work of your next Servo projec...

M5-M014

These metal gear servos are an excellent replacement for the standard servos commonly used in all 1/10th and many 1/8th scale remote contro...

TB-YM2765

These metal gear servos are an excellent replacement for the standard servos commonly used in all 1/10th and many 1/8th scale remote contro...

TB-YM2763

This servo plate allows you to attach gears and mechanical structures to your standard sized servo. There are 4 6-32 tapped holes for mounting your...

SF-ROB-12330

This servo plate provides a mounting ring for your ¼-sscale servo. Four 6-32 tapped holes hold the servo in place, while 12 holes surrounding the p...

SF-ROB-12200

This servo plate allows you to attach gears and mechanical structures to your standard sized servo. There are 4 6-32 tapped holes for mounting your...

SF-ROB-12237

This servo plate allows you to attach gears and mechanical structures to your standard sized servo. There are 4 6-32 tapped holes for mounting your...

SF-ROB-12292

These servo shaft attachments are great when connected to your 3F Futaba servo spline and used in conjunction with a ServoBlock Kit. These aluminum...

SF-ROB-12312

These servo shaft attachments are great when connected to your C1 Hitec servo spline and used in conjunction with a ServoBlock Kit. These aluminum ...

SF-ROB-12464

These couplers allow you to connect a 1/4” shaft directly to your C1 Hitec servo spline. The set screw included with each shaft coupler works well ...

SF-ROB-12501

This 3-wire harness can be used to add a toggle switch between any two devices that can be connected with “JR” style servo connectors. One side of...

PL-2170

This 3-wire harness can be used to add a toggle switch between any two devices that can be connected with “JR” style servo connectors. One side of...

PL-2171

The servo tester and controller can be used as a signal generator for electronic speed controllers.   If you are looking for a low-cost way to get ...

LB-LR0309-57