Products

USB-powered charger for LIR2032 coin cell batteries. DO NOT use with non-rechargeable CR2032 batteries!Note: Battery not included! Teknikio make a ...

PI-TEK012

A smaller-sized rechargeable battery pack for your Raspberry Pi or Raspberry Pi B+ (or Arduino, or Propeller, or anything else that works with 5V!)...

AF-1959

A large-sized rechargeable battery pack for your Raspberry Pi (or Arduino, or Propeller, or anything else that uses 5V!). This pack is intended for...

AF-1566

A massive rechargeable battery pack for your Raspberry Pi (or Arduino, or Propeller, or anything else that uses 5V!). This pack is intended for pro...

AF-962

A medium-sized rechargeable battery pack for your Raspberry Pi (or Arduino, or Propeller, or anything else that uses 5V!). This pack is intended fo...

AF-1565

The USB Bit Whacker is a spectacular little development board featuring the PIC18F2553. Based on the work of Brian Schmalz, the UBW is a small boar...

SF-DEV-00762

Note: These use genuine FTDI chips, either we purchase them or they are manufactured to our specifications with the requirement of genuine FTDI chi...

AF-91

Very handy: takes 1.2V to 4.5V in, and gives you a nicely regulated 5V out at up to 500mA! Perfect for powering Arduino projects from a small batte...

FT-USBBOOST

If you need to add a panel-mount connection for USB C, but don't have the time or tools to cut a custom oval or square hole, this USB C jack to USB...

AF-4260

If you need to add a panel-mount connection for USB C, but don't have the time or tools to cut a custom oval or square hole, this Round Panel Mount...

AF-4259

If you need to add a panel-mount connection for USB C, but don't have the time or tools to cut a custom oval or square hole, this USB C Jack to USB...

AF-4261

The TS80 is a chic and smart soldering iron powered by USB Type-C and QC3.0 standard input. Normally we'd scoff at trying to power a soldering iron...

AF-4244

If you need to add a panel-mount connection but don't have the time or ability to cut a custom oval or square hole, this USB C Round Panel Mount Ex...

AF-4218

If you're a DIY enthusiast who'd like to update your project's connection to the latest USB standard, here is a 10-pack of USB C jack connectors! T...

AF-4458

If you're a DIY enthusiast who'd like to update your power only project's connection to the latest USB standard, here is a 10-pack of USB C power o...

AF-4907

This USB 2.0 Type C cable is perfect for use with your Raspberry Pi 4 and other USB Type C boards. USB Type-C Connectors and Cable Assemblies offer...

SF-CAB-16905

As technology changes and adapts, so does Adafruit! Rather than the regular USB A, this cable has USB C to Micro B plugs!USB C is the latest indust...

AF-3879

As technology changes and adapts, so does Adafruit! Rather than the regular USB A, this cable has USB C to Micro B plugs!USB C is the latest indust...

AF-3878

As technology changes and adapts, so does Adafruit! Rather than the regular USB A, this cable has USB C to USB C plugs!USB C is the latest industry...

AF-4199

As technology changes and adapts, so does Adafruit! Rather than the regular USB A, this cable has USB C to USB C plugs!USB C is the latest industry...

AF-4198

This here is your standard A-microB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your NETduino, Arduino Leonardo, Raspberry Pi (am...

AF-898

This here is your standard A-miniB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Teensy, USB Lipo charger (among other things)...

AF-899

This here is your standard A-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Arduino, USBtinyISP, or USB Boarduino (among othe...

AF-900

Mini or Micro? Mini or Micro??? Mini AND Micro! This is a handy USB cable, it's compact so you can toss it into your toolkit, and has both Mini-B a...

AF-1197

This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that’s usually used for printers. ...

SF-RTL-10423

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other de...

AF-592

This here is your standard A-miniB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Teensy v2, USB Lipo charger w/Mini B connecto...

AF-260

This here is your standard A-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Arduino, USBtinyISP (among other things). 3 fe...

AF-62

This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that’s usually used for printers. ...

SF-CAB-00512

Discontinuation notice: This product has been replaced by a 6’-long version. USB A to Micro-B cable size comparison: standard cable (#1939) o...

PL-1939

USB A to Micro-B cable size comparison: standard cable (#2073) on left, thin cable (#2072) on right. This USB cable is six feet long (1.8 m)...

PL-2073

This retractable USB cable can be extended up to a length of three feet and has a male, type-A connector and a male, mini-B connector. It is u...

PL-1130

This USB cable is five feet long (1.5 m) and has a male Type-A connector and a male Mini-B connector. 

PL-1315

USB cable size comparison (product #1129 on left, #130 on right). This USB cable is six feet long (1.8 m) and has a male Type-A connector an...

PL-130

This is the most common A to B Male/Male type peripheral USB 2.0 cable for arduino.  It is compatible with most Arduino boardssuch as Arduino Mega,...

DF-FIT0056

qualMeter is an easy and cost-efficient DIY device, which can help you to simply diagnose the quality of your USB charging cable and charger in a ...

DF-FIT0517

qualMeter miniLoad is specially designed for extending the qualMeter Basic's charger output testing range. When plugging miniLoad into qualMeter B...

DF-FIT0518

qualMeter is an easy and cost-efficient DIY device, which can help you to simply diagnose the quality of your USB charging cable and charger in a ...

DF-FIT0519

This is a 1.5' long USB extension cable equipped with type A male connector on one end to plug into your computer and a type A female connector at ...

SF-CAB-13309

These extension cables have a type A male connector on one end that plugs into any computer. The opposing end has a female type A connector allowin...

SF-CAB-00517

This is a usefull USB cable for Arduino fanciers - type A to Barrel Jack Adapter. It can be used to power Arduino or Arduino Mega by plugging into ...

IT-IM120530010

Type-B USB cable in length of 30cm, work with Arduino Uno, RoHS compliant.   Features 30cm length RoHS compliant 

SS-321010003

The USB to RS232 adapter is designed to make serial port expansion quick and simple. Connecting to a USB port on your computer or USB hub, the USB ...

IT-IM120612001

This is an important USB cable for Arduino fanciers - type A to type B. It's needed to connect Arduino or Arduino Mega with your computer. It's a 1...

IT-IM120530009

This is an important USB cable for Arduino fanciers - type A to type B. It's needed to connect Arduino or Arduino Mega with your computer. It's a 5...

IT-IM120719001