Boards in Arduino & Microcontrollers

The Little Bird Uno R3, is a 100% Arduino™ compatible development board.Just like the original Arduino Uno the Arduino Shield compatible design mak...

LB-00300

This is the latest Arduino Uno R3 from Little Bird Australia. In addition to all the features of the previous board, the Uno now uses an ATmega16U2...

SF-DEV-11021

The Adafruit Trinket M0 may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATSAMD21, a littl...

AF-3500

It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. ...

SF-DEV-11113

Aww yeah, it's the Feather you have been waiting for! The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module. We packed eve...

AF-3405

The Beetle is the smallest Arduino Leonardo board available, measuring 20mm by 22mm. Despite its minimalist design, this compact board has similar ...

DF-DFR0282

Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiri...

SF-DEV-11061

It's what you've been waiting for, the Feather M4 Express featuring ATSAMD51. This Feather is fast like a swift, smart like an owl, strong like a o...

AF-3857

Headers are like the duct tape of electronics. They're great for connecting things together, soldering to perf-boards, sockets for wires or break-a...

AF-3366

Bluno Beetle - The smallest Arduino Board is another milestone in wearable electronics device area based arduino uno, which makes DIY users have mo...

DF-DFR0339

NEW VERSION AVAILABLE HERE EagLED is Little Bird Electronics' wearable development kit. It's a complete Arduino compatible microcontroller that has...

LB-EAGLED

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new stan...

AF-2821

It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader....

SF-DEV-11114

Sure, your flashing, chip-tune playing T-shirt is really cool at the party… but at some point you need to turn it off. And yes, you could just pull...

SF-DEV-13883

Here at SparkFun, we refuse to leave ‘good enough’ alone. That’s why we’re adding to our line-up of Arduino-compatible microcontrollers once more! ...

SF-DEV-12640

FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower ama...

AF-659

As of October 9th, 2015 the 5V Trinket comes with a micro-USB connector instead of a mini-USB connector!Trinket may be small, but do not be fooled ...

AF-1501

These two Female Stacking Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! What do they do? Th...

AF-2830

These two Short Female Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business!These headers are parti...

AF-2940

A Feather board without ambition is a Feather board without FeatherWings!This is the FeatherWing Proto - a prototyping add-on for all Feather board...

AF-2884

This is the LilyPad Rainbow LED strip, with seven LilyPad LEDs that are still attached to one another, letting you snap LEDs apart at your leisure ...

SF-DEV-13903

This is the Adafruit Feather M0 RFM95 LoRa Radio (900MHz). We call these RadioFruits, our take on an microcontroller with a "Long Range (LoRa)" pac...

AF-3178

These two Female Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business!What do they do? They get sol...

AF-2886

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other de...

AF-592

Love FLORA but want a bite-sized version? Look no further, GEMMA is a tiny wearable platform board with a lot of might in a 1" diameter package. Po...

AF-1222

This is a simple pack of five Red LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into ...

SF-DEV-14013

We designed this board to give the user a low profile button without any sharp edges. Button closes when you push it and opens when you release (mo...

SF-DEV-08776

This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on t...

SF-DEV-11224

At SparkFun we use many Arduinos and we’re always looking for the simplest, most stable one. Each board is a bit different and no one board has eve...

SF-DEV-13975

We still love the Pro Trinket but the bit-bang USB technique it uses doesn't work as well as it did in 2014. So while we still carry the Pro Trinke...

AF-2000

This is a simple pack of five Yellow LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew in...

SF-DEV-14014

The Adafruit Feather nRF52 Bluefruit is another easy-to-use all-in-one Bluetooth Low Energy board, with a native-Bluetooth chip, the nRF52832!  It'...

AF-3406

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new stan...

AF-2796

A Feather board without ambition is a Feather board without FeatherWings! This is the Adalogger FeatherWing: it adds both a battery-backed Real Tim...

AF-2922

With this Feather we're getting a little nostalgic for the ATmega328P - the classic 'Arduino' chip - with this Adafruit Feather 328P running a 3.3V...

AF-3458

This is a simple pack of five Green LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew int...

SF-DEV-14011

A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-...

AF-2927

This is the Adafruit Feather M0 RFM69 Packet Radio (868 or 915 MHz). We call these RadioFruits, our take on an microcontroller with a RFM69HCW pack...

AF-3176

If you’re ready to step up your Arduino game from older 8-bit/16MHz microcontrollers, the SparkFun RedBoard Turbo is a formidable alternative. At i...

SF-DEV-14812

DFRduino Uno V3.0 from DFRobot is a physical world computing board of small size for academics or development . It is a simple microcontroller b...

DF-DFR0216

Make your Arduino-based project tiny and with the Adafruit METRO Mini! The METRO Mini works great with the Arduino IDE, and runs the ATmega328P at ...

AF-2590

This is the FeatherWing Tripler - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are t...

AF-3417

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new stan...

AF-2995

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new stan...

AF-3010

This is the FeatherWing Doubler - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are t...

AF-2890

We love all our Feathers equally, but this Feather is very special. It's our first Feather that is specifically designed for use with CircuitPython...

AF-3403

At SparkFun we continually like to inovate, update, and improve even when it comes to our very own development boards. We have multiple versions of...

SF-DEV-15123