Arduino & Microcontrollers

This is a very popular LCD Keypad shield for Arduino and other variants. It includes a 2x16 LCD display and 6 momentary push buttons. Pins 4, 5, 6...

DF-DFR0009

These two Short Female Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business!These headers are parti...

AF-2940

The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x).It has more or less the same functio...

PI-A000005

Our RGB matricies are dazzling, with their hundreds or even thousands of individual RGB LEDs. Compared to NeoPixels, they've got great density, pow...

AF-2601

DFRobot proudly presents the Intermediate Kit for Arduino! Starting with some simple LED projects and then moving on to more complicated projects ...

DF-KIT0018

IO Expansion shield is one of the market favourites. Fast robotics prototyping made affordable and simple thanks to this design. Soldering and wir...

DF-DFR0265

A Feather board without ambition is a Feather board without FeatherWings!This is the FeatherWing Proto - a prototyping add-on for all Feather board...

AF-2884

This is the LilyPad Rainbow LED strip, with seven LilyPad LEDs that are still attached to one another, letting you snap LEDs apart at your leisure ...

SF-DEV-13903

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positi...

DF-FIT0110

The Arduino DMX shield is an add-on (or "shield") for the Arduino. It is an easy way to use the Arduino as a DMX-Master device, just by adding the...

DF-DFR0260

Arduino product family is a great learning platform for electronics, programming and robotics. But most projects at some point require mobility. T...

DF-DRI0009

This Solar lipo charger is designed for single Lithium battery (3.7V) for intelligent charging, with input reverse polarity protection. The maxim...

DF-DFR0264

The SparkFun Inventor’s Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino programming language. Th...

SF-KIT-14265

This is the Adafruit Feather M0 RFM95 LoRa Radio (900MHz). We call these RadioFruits, our take on an microcontroller with a "Long Range (LoRa)" pac...

AF-3178

Already run the Crack the Code Unit of Work and want to replenish your component box and student sets?At Little Bird Electronics we have put togeth...

LB-CTCREP

Add this board to a device and you’ll be able to connect it to a WiFi network, using its secure ECC608 crypto chip accelerator. The Arduino Uno WiF...

SF-DEV-14871

Infrared obstacle sensor is designed for adding to your robot so that it can avoid obstacles. Specifications IO Interface: 4-wire interfaces (- /...

LB-LR0006

These two Female Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business!What do they do? They get sol...

AF-2886

Introduction This is a high-quality I2C LCD2004 display. It's in elegant blue with white contents displayed. It can display 4 rows with 20 characte...

SU-CZ0026

This is a transparent plastic Arduino case, which is specially designed for Arduino UNO R3. It is made of ABS material, which has good strength and...

DF-FIT0603

INTRODUCTION Simple 4 Cell AA Battery holder with 5" tinned leads, square configuration. This holder features a slidin...

DF-FIT0080

This battery holder can hold 3 AA batteries which provides 3.6V rechargeable battery pack with NiMH / NiCd cells or 4.5V battery pack with Alkal...

DF-FIT0362

Referring to the LCD16020, I believe that everyone is not unfamiliar with the square shape, green color, a row of 2.54 pin header.... LCD1602 modu...

DF-DFR0556

The CAN-BUS Shield provides your Arduino or Redboard with CAN-BUS capabilities and allows you to hack your vehicle. This shield allows you to poll ...

SF-DEV-13262

You want to make a cool Arduino robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive ...

AF-1411

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other de...

AF-592

Note: This product is manufactured in Italy by affiliates of Arduino Srl, and the product packaging suggests downloading the Arduino IDE from ardu...

PL-1699

Love FLORA but want a bite-sized version? Look no further, GEMMA is a tiny wearable platform board with a lot of might in a 1" diameter package. Po...

AF-1222

This is a simple pack of five Red LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into ...

SF-DEV-14013

We designed this board to give the user a low profile button without any sharp edges. Button closes when you push it and opens when you release (mo...

SF-DEV-08776

Referring to the LCD16020, I believe that everyone is not unfamiliar with the square shape, green color, a row of 2.54 pin header.... LCD1602 modu...

DF-DFR0555

This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on t...

SF-DEV-11224

This Relay Shield for Arduino acts like a switch. It is commonly used to control anything over 5V such as lamps, water pumps and garage doors. ...

DF-DFR0144

Brand new and better than ever, we've replaced our Adafruit GPS shield kit with this assembled shield that comes with an Ultimate GPS module. This ...

AF-1272

DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. FireBeetle...

DF-DFR0478

This kit contains everything you need for the "Crack the Code" segment in the NSW technology curriculum and a few spares of the easy to lose compon...

LB-CTC-2018

Referring to the LCD16020, I believe that everyone is not unfamiliar with the square shape, green color, a row of 2.54 pin header.... LCD1602 modu...

DF-DFR0557

This Arduino compatible module measures the reflectivity of a surface with an infrared emitter/detector pair.The output goes to high whenever the r...

LB-LR0005

The SparkFun OpenLog is an open source data logger that works over a simple serial connection and supports microSD cards up to 64GB. The OpenLog ca...

SF-DEV-13712

At SparkFun we use many Arduinos and we’re always looking for the simplest, most stable one. Each board is a bit different and no one board has eve...

SF-DEV-13975

We still love the Pro Trinket but the bit-bang USB technique it uses doesn't work as well as it did in 2014. So while we still carry the Pro Trinke...

AF-2000

Overview Pololu dual MC33926 motor driver shield for Arduino. This motor driver shield and its corresponding Arduino library make it easy to...

PL-2503

This is a simple pack of five Yellow LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew in...

SF-DEV-14014

The Adafruit Feather nRF52 Bluefruit is another easy-to-use all-in-one Bluetooth Low Energy board, with a native-Bluetooth chip, the nRF52832!  It'...

AF-3406

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new stan...

AF-2796

The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this...

SF-DEV-09718

INTRODUCTION This is an Arduino Can Bus shield. It is compatible with the Arduino standard interface and can be stacked...

DF-DFR0370

“How could something so simple be so useful?”  We heard once that in the 4th millenium B.C. some guy asked the person who invented the wheel tha...

AF-85