Arduino & Microcontrollers

By popular request, you can now get our 1.2" Tall 7-Segment LED backpacks without the LEDs! These backpacks feature an HT16K33 I2C LED driver, they...

AF-1271

Introduction The ENC28J60 is a stand-alone Ethernet controller with an industry standard Serial Peripheral Interface (SPI™). It meets all of the IE...

SU-TS0671

Features: Protective case of UNO R3 Fastened by eight screws Made by high grade acrylic Provides excellent protection, with fashion appearance Uniq...

SU-R3CASE

Introduction This is a new SunFounder Mega + W5100 Kit, which is easy for Arduino hobbyists and starters to plug and play, containing one SunFounde...

SU-MEGAW5100

The GPRS/GSM Shield provides you a way to use the GSM cell phone network to receive data from a remote location. The shield allows you to achieve ...

TS-G50EFC56E3197F

A large, colourful touch display shield which piggy-backs straight onto your Uno or Mega. Display photos from the Micro SD card slot on the...

TB-XC4630

A compact Colour TFT-LCD display supporting 16 bit colour at 128x128 pixels, and only needing six pins for full control. Features ST7735 Ch...

TB-XC4629

Large 32 x 16 pixel red LED display for your Arduino to create message boards, clocks, spectrum analysers, games for the home, office, shop...

TB-XC4621

A compact ATMega 32U4 based main board designed with portability in mind. Just like the Leonardo, a single chip handles main controller fun...

TB-XC4620

A larger display than XC4616, with cool white on blue graphics. Similar to the character LCD’s with inbuilt character ROM, but the flexibil...

TB-XC4617

These compact LCD displays are identical to those found in some old Nokia phones, and feature the PCD8544 chipset. An easy way to a small b...

TB-XC4616

Using the powerful ESP8266 IC, the ESP-13 Wifi Shield adds much more than just plain wifi to your Arduino. It has an 80MHz processor and ca...

TB-XC4614

Adapter from 10pin ISP header to 6pin ISP header as found on Arduino boards. * Use with an ISP programmer to update bootloaders or refl...

TB-XC4613

Create a smarter line-following robot with the Triple Infrared Reflectance Sensor Module. The module has three evenly spaced sensors and mo...

TB-XC4611

Monitor the motors on your next robot project with the 30A Current Sensor Module. The module outputs a voltage proportional to current pass...

TB-XC4610

Break out your XBee compatible boards to the standard 2.54mm header spacing. Ideal for the XC4600 GPS Bee. Features: * Pins marked ...

TB-XC4608

This is a full 8-pin breakout for the SIM socket allowing direct access to SIM communication. Features a Lock and Open switch. ...

TB-XC4596

This sharp distance sensors are a popular choice for many projects that require accurate distance measurements. This IR sensor is more econ...

TB-XC4585

The Linker Tilt Module is the equivalent of a button, and is used as a digital input. Inside the tilt switch is a pair of balls that make c...

TB-XC4575

This is a high power LED module for the Linker kit. It has five very bright white LEDs to use as lamp or camera flash. Features: ...

TB-XC4570

This LED bar is a standard Linker kit module, so it can connect to Arduino or pcDuino easily via the base shield. The LED bar has 10 light ...

TB-XC4568

Linker LED Module is designed for beginners of Arduino/pcDuino to monitor controls from digital ports. It can be mounted to to your project...

TB-XC4562

RS485 is a standard communication port for field bus. Arduino only has a USB port and a TTL UART interface. In order to talk to a device th...

TB-XC4554

The ScrewShield extends all pins of the Arduino out to 3.5mm pitch screw terminals. The screw terminal blocks allows sturdy, secure and dep...

TB-XC4553