Sensors in Breakouts, Boards & Electronics

If you've ever ordered and wire up a 9-DOF sensor, chances are you've also realized the challenge of turning the sensor data from an accelerometer,...

AF-2472

Little Bird has created a digital DHT11 Temperature and Humidity sensor. It is powerful and easy to use.   The DHT11 is a Temperature Sensor and Hu...

LB-DHT11-SENSOR

Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz elect...

AF-1063

Add lots of touch sensors to your next microcontroller project with this easy-to-use 12-channel capacitive touch sensor breakout board, starring th...

AF-1982

Listen to this good news - we now have a breakout board for a super tiny I2S MEMS microphone. Just like 'classic' electret microphones, MEMS mics c...

AF-3421

Add motion, direction and orientation sensing to your Arduino project with this all-in-one 9-DOF sensor. Inside the chip are three sensors, one is ...

AF-3387

The LIS3DH is a very popular low power triple-axis accelerometer. It's low-cost, but has just about every 'extra' you'd want in an accelerometer: T...

AF-2809

So many accelerometers and so little time! We've expanded our accelerometer selection even more with this high-precision and inexpensive MMA8451 Tr...

AF-2019

Wifi Bee-ESP8266 is a Serial-to-WIFI module using XBEE design in a compact size, compatible with XBEE slot, applicable to a variety of 3.3V sing...

DF-TEL0092

The LIS3DH Breakout is a smart, low-power, three-axis, capacitive micro-machined accelerometer with 12 bits of resolution that you can use to add t...

SF-SEN-13963

Add an ear to your project with this well-designed electret microphone amplifier with AGC. This fully assembled and tested board comes with a 20-20...

AF-1713

This breakout board makes it easy to use the tiny MMA8452Q accelerometer in your project. The MMA8452Q is a smart, low-power, three-axis, capacitiv...

SF-BOB-13926

The SparkFun Current Sensor Breakout is a high accuracy board that utilizes the ACS723 for moderate AC and DC current sensing applications. The AC...

SF-SEN-13679

The SparkFun Sound Detector is a small and very easy-to-use audio sensing board with three different outputs. The Sound Detector not only provides ...

SF-SEN-14262

We've updated our favorite triple-axis accelerometer to now have an on-board 3.3V regulator - making it a perfect choice for interfacing with a 5V ...

AF-163

Listen to this good news - we now have a breakout board for a super tiny MEMS microphone. Just like 'classic' electret microphones, MEMS mics can d...

AF-2716

W5500 Ethernet with POE Mainboard is a new member in our Ethernet family. It is based on the ATmega32u4 and W5500 Ethernet chip, which is quite us...

DF-DFR0342

Measure the invisible magnetic fields that surround us, with this wide-range magnetometer. The MLX90393 is a wide range magnetic field sensor, that...

AF-4022

The ADXL337 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned analog voltage outputs that measures acceleration wi...

SF-SEN-12786

The SparkFun AS7263 Near Infrared (NIR) Spectral Sensor Breakout brings spectroscopy to the palm of your hand, making it easier than ever to m...

SF-SEN-14351

This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here ...

AF-1374

Filling out our accelerometer offerings, we now have the really lovely digital ADXL345 from Analog Devices, a triple-axis accelerometer with digita...

AF-1231

Add heat-vision to your project and with an Adafruit AMG8833 Grid-EYE Breakout! This sensor from Panasonic is an 8x8 array of IR thermal sensors. W...

AF-3538

9DOF MPU-9150 is a 9-axis MotionTracking MEMS device designed for the low power, low cost, and high performance requirements of consumer electronic...

LB-LS1026

This new version adds 2 standoff holes as well as an extra decoupling capacitor. The ADXL345 is a small, thin, low power, 3-axis MEMS accelerometer...

SF-SEN-09836

This versatile piezo-element module can be used for both input or output! It can be used as a noise-maker driven by your microcontroller for audibl...

FT-SOUND

 Sense magnetic presence, rotating wheels and magnets, door and arm sensors, and anything else magnetic nearby this sensor.Click here for our Hall ...

FT-HALL

Combining an accelerometer, a magnetometer, and a gyroscope all in one tiny package with an Arduino-friendly I2C interface. Perfect for building a...

FT-IMU9

The NXP Precision 9DoF breakout combines two of the best motion sensors we've tested here at Adafruit: The FXOS8700 3-Axis accelerometer and magnet...

AF-3463

Add motion and direction sensing to your wearable FLORA project with this high precision 3-axis Accelerometer+Compass sensor. Inside are two sensor...

AF-1247

Sometimes you need to sense pressure in a damp environment. And sometimes you need to know the relative changes in pressure as well as the absolute...

AF-4258

With Ethernet relay, IoT(Internet of things) has become so easy. RLY-8-POE-USB is a POE & USB controlled 8 channel relay controller based on...

DF-DFR0289

The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power, high-g accelerometer with I2C and SPI interface options. Though not...

SF-SEN-14480

This breakout board makes it easy to use the tiny MMA8452Q accelerometer in your project. The MMA8452Q is a smart low-power, three-axis, capacitive...

SF-SEN-12756

The Wii Nunchuck has proven to be an excellent bargain - switches, joystick, and accelerometer in one handy package! But it's a shame to hack off t...

AF-345

This breakout board is the simplest way to create a project with a single "toggle" capacitive touch sensor. No microcontroller is required here - j...

AF-1375

He told you "Go West, young maker!" - but you don't know which way is West! Ah, if only you had this triple-axis accelerometer/magnetometer compass...

AF-1120

SPECIFICATION Power Supply range: 5v or 7-12v Arduino Leonardo Compatible Integrate with WG1300 WIFI chip...

DF-DFR0321

The SparkFun AS7262 Visible Spectral Sensor Breakout brings spectroscopy to the palm of your hand, making it easier than ever to measure and c...

SF-SEN-14347

The ADXL377 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned analog voltage outputs that has a full-scale range ...

SF-SEN-12803

Have you ever wanted your project to just “hibernate” until someone picks it up or moves it? It’s a great strategy for dramatically extending the b...

SF-SEN-11447

This breakout board is the simplest way to create a project with mutiple capacitive touch sensors. No microcontroller is required here - just power...

AF-1362

Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the...

AF-1602

A gyroscope is a type of sensor that can sense twisting and turning motions. Often paired with an accelerometer, you can use these to do 3D motion ...

AF-1032

Control the same hardware as used in space...build your very own Astro Pi with the new Raspberry Pi Sense HAT! The Raspberry Pi Sense HAT is attach...

AF-2738

The RN-XV module by Roving Networks is a certified Wi-Fi solution especially designed for customer who want to migrate their existing 802.15.4 a...

DF-TEL0067

Internet of things has become so easy. With Xboard Relay, you can not only monitor data through internet, but also control it through internet....

DF-DFR0222

The Powerline Ethernet Adapter(STP-PLC200PT/STP-PLC200PP-A) is a device which can deliver a fast Internet signal to the farthest corners of your...

DF-TEL0057