Cables

USB 2.0 type A to mini USB 5-pin. This is a new, smaller connector for USB devices. mini USB connectors are about half the height of mini USB. min...

DF-FIT0057

This cable is a little unusual, rather than having a USB A plug on one end, it has two Micro B USB connections! What is this for? It's for when you...

AF-3610

IntroductionThe breadboard allows you to easily plug in and remove components and so if there are going to be many changes or if you just want to m...

SU-CZ0081

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Displ...

AF-2144

The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this...

SF-DEV-09718

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of ...

AF-3551

These 4-wire cables are 15cm long and come as a set, one side has a JST SM type connector plug on the end. The other side has a matching JST SM typ...

AF-578

This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector (2 mm pitch) that works with Sharp analog distance sensors t...

PL-1798

The official Raspberry Pi micro HDMI to HDMI (A/M) cable designed for the Raspberry Pi 4 computer. 19-pin HDMI Type D(M) to 19-pin HDMI Type A(M) 2...

RP-SC0532

That new Raspberry Pi 400 computer you just got has a row of 2x20 pin headers on the right side - those are the GPIO (general purpose input/output)...

AF-4823

We use 2 pin JST PH connectors for all our battery packs, and if you want to put a board in series, like our LC709203F Stemma QT battery gauge, thi...

AF-4714

This panel mount cable will allow you to enclose a device that has a USB A port, and also converts it to a modern USB C connector at the same time....

AF-4052

When 0.1" is too big, and JST PH's too chunky, the ultra-slim "PicoBlade" is a reliable alternative. These are only 1.25mm pitch, but have a nice c...

AF-3922

Double up on your micro USB capabilities with the Micro B USB 2-Way Splitter Cable. This splitter is great for reducing cable clutter and freeing u...

AF-3030

Once you’ve hacked everything, why not go out in the garage and hack your car? This cable allows you to access the pins on your car’s OBDII connect...

SF-CAB-10087

Connect two HDMI devices together and save space with this basic flat HDMI 1.4 cable. It has nice molded grips for easy installation, and is 1 foot...

AF-2197

These 3-wire cables are 163mm (6.4") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching ...

AF-1663

This 12-inch (30-cm) cable has 28 AWG wires and a 3-pin female JST ZH-style connector that mates with the 3-pin connector on Sharp GP2Y0A51 analog...

PL-2411

Raspberry Pi Camera Cable Extension Cable 15cm.  This connects a Raspberry Pi Camera to a Raspberry Pi Zero. 

LB-PT-15CM

This cable is designed to work with our Micro Metal Gearmotor Encoders with top-entry connector and with side-entry connector. It consists of six 2...

PL-4762

This is the most common A to B Male/Male type peripheral USB 2.0 cable for arduino.  It is compatible with most Arduino boardssuch as Arduino Mega,...

DF-FIT0056

This adapter board is designed to make it easier to use ARM dev boards that use slimmer 2x5 (0.05"/1.27mm pitch) SWD cables for programming.  It's ...

AF-2743

You’ve got the wrong USB cable. It doesn’t matter which one you have, it’s the wrong one. But what if you could have the right one? What if you cou...

SF-CAB-12016

Connect a device with a Mini HDMI port to a regular sized HDMI port together with this basic HDMI cable. It has nice molded grips for easy installa...

AF-2775

If you’re looking to play with PICAXE microcontrollers on a computer with only USB, look no further! The PICAXE USB programming cable allows PICAXE...

SF-PGM-08312

This handy USB extension cable will make it easy for you to enclose a device that has a A type (USB host) port. We think this would be most handy w...

AF-908

This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" female sockets on the end. We're carrying the...

AF-3950

This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and has a 50Ω impedance that can handle freque...

SF-WRL-12861

Is the flex cable for your Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display too short? Or maybe it's cluttering your w...

AF-2087

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of ...

AF-3550

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of ...

AF-3556

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of ...

AF-3557

Toss away your boring old SWD/JTAG adapters! This Black Magic Probe, designed by 1BitSquared with Black Sphere Technologies, is a next-generation d...

AF-3839

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black pai...

SF-CAB-00509

This convenient 3.8mm/1.3mm or 3.5mm/1.1mm or 1.3mm DC to 2.1mm DC adapter cable lets you plug one of our solar panels into our optimized Solar Lit...

AF-2788

This is a Micro-HDMI video cable tailored to the Raspberry Pi 4B, supporting 4K HD resolution. There is no delay, no flash, the transmission is sta...

DF-FIT0648

If you need to add a panel-mount connection for USB Micro B,  but don't have the time or ability to cut a custom oval or square hole, this Round Pa...

AF-4217

As technology changes and adapts, so does Adafruit! Rather than the regular USB A, this cable has USB C to USB C plugs!USB C is the latest industry...

AF-4199

Add a power switch to any USB-powered project simply by plugging this between the USB power port and the USB cable. This is the most useful thing y...

AF-1620

This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that’s usually used for printers. ...

SF-CAB-00512

This is a 1.5' long USB extension cable equipped with type A male connector on one end to plug into your computer and a type A female connector at ...

SF-CAB-13309

This is a USB 2.0 type A to Micro-B 5-pin black cable. You know, the mini-B connector that usually comes with cell phones, Cameras, MP3 players, et...

SF-CAB-13244

USB C is fantastic. But until we have converted all our hubs, chargers, and ports over to USB C this is the cable you’re going to need. Supporting ...

SF-CAB-14743

This is a very simple 1m long TNC to RP-SMA cable. We like to use this cable to connect our ultra high-frequency RFID antennas to an equally powerf...

SF-CAB-14132

This handy Ethernet extension cable will make it easy for you to enclose a device that has an Ethernet port. We think this would be most useful whe...

AF-909

Description: This 2M HDMI Cable is perfect to plugging you Raspberry Pi into your HDMI enabled monitor or television.  Dimensions:   Connector ...

ET-2113609