Components Parts

Note: We have released a newer version of the RC Switch with Digital Output, which is better than this product in almost every way and should be a...

PL-752

Discontinuation notice: We have released improved versions of these switches in several different power levels and with substantially expanded ope...

PL-751

Discontinuation notice: We have released improved versions of these switches in several different power levels and with substantially expanded ope...

PL-750

It is a reed switch. When any magnets get close to the reed switch, the switch is on, else is off. These InnoBits are compatible with LittleBits ...

IB-I16V4

It is a thermo switch, it will turn on the output module when temperature reaches 55ºC or above. These InnoBits are compatible with LittleBits and...

IB-I15V4

  It has a self-locking on/off button. It stays in the current locking stage or releasing stage until it is pressed again. These InnoBits are com...

IB-I8V4

  It has a little lever with a wheel, and activates when something moves past it. You can also flip, the mode switch to make it turn off when the...

IB-I7V4

Just drill a recess in your door or window and the magnet flush mounts to be invisible. The reed switch segment is similarly mounted into t...

TB-LA5076

Physical structure Leaflet Title Short Circuits Three Project -...

TB-KJ8085

Refer: Silicon Chip Magazine July 2014 A simple but versatile device to switch a relay when its input voltage crosses a threshold. Use ...

TB-KC5528

Ref Silicon Chip Magazine January 2009 Suitable for remote control of practically anything up to a range of 200m, for example, as a r...

TB-KC5473

Overview August 2018 update: We are transitioning to shipping units with firmware version U72B, which offers numerous improvements including more ...

PL-2764

Overview August 2018 update: We are transitioning to shipping units with firmware version U72B, which offers numerous improvements including more ...

PL-2763

Raspberry Pi 1 Model A+, top view. Raspberry Pi 1 Model A+, bottom view. Overview The Raspberry Pi is a credit card-sized computer. The Ras...

PL-2760

OverviewThe Raspberry Pi is a credit card-sized computer. The Raspberry Pi 3 Model B is the third generation Raspberry Pi. It is based on the BCM28...

PL-2759

Overview This motor driver board is an add-on for a compatible Raspberry Pi (Model B+ or newer), including the Pi 3 Model B+ and Model A+, tha...

PL-2755

Overview This stackable 26-pin female header features two rows of 13 pins spaced with a standard 0.1″ (2.54 mm) pitch; this spacing is the same as...

PL-2747

Overview This stackable 26-pin female header features two rows of 13 pins spaced with a standard 0.1″ (2.54 mm) pitch; this spacing is the same as...

PL-2746

Overview These 0.1" straight female header strips are commonly used as low-cost connectors for custom-made cables or perforated prototyping PCBs. ...

PL-2745

Overview The heart of the MP3 Trigger board is the Cypress PSoC CY8C29466-24SXI microcontroller which serves up MP3 data to a VLSI VS1063 aud...

PL-2744

Overview The Pololu AltIMU-10 v5 is a compact (1.0″ × 0.5″) board that combines ST’s LSM6DS33 3-axis gyroscope and 3-axis accelerometer, LIS3MDL...

PL-2739

Overview This board is a compact (0.4″ × 0.9″) breakout board for ST’s LIS3MDL three-axis digital magnetic sensor; we therefore recommend care...

PL-2737

Overview This board is a compact (0.4″ × 0.9″) breakout board for ST’s LSM6DS33 inertial module, which features a 3-axis digital linear accele...

PL-2736

Note: This product does not include electrodes; they are available separately in packs of six. To use the sensor, an electrode must be connected t...

PL-2732