Components Parts

Solderless breadboards are commonly used for prototyping because they allow you to quickly build temporary circuits without soldering. Breadboar...

PL-351

We use these little buttons on everything! These Miniature Single Pole Single Throw switches have a good click to them and are breadboard friendly....

LB-PUSH

 This Brass Standoff Kit includes the following parts: 10x M2.5 6mm Brass Female-Female Spacers 10x M2.5 10mm Brass Female-Female Spacers 10x M2....

LB-LR0309-36

A row of headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers.Features:  Pin Style: Square ...

SF-PRT-00116

This serial controlled Relay Module from Little Bird Electronics provides a simple way to connect a relay up to your Arduino, AVR, PIC or Raspberry...

LB-LR0002

This Breadboard Compatible Speaker (a Little Bird exclusive product) is perfect for use with a breadboard as it has jumper wires with standard head...

LB-SPEAKER

Cherry MX Keyswitches are top-of-the-line mechanical keyboard switches. They’re satisfyingly “clicky”, reliable up to tens-of-millions of key press...

LB-00098

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec H...

SF-ROB-09065

This is a very common signal diode - 1N4148. Use this for signals up to 200mA of current. If you need a bunch of these, you can get good bulk dis...

SF-COM-08588

Cherry MX Keyswitches are top-of-the-line mechanical keyboard switches. They’re satisfyingly “clicky”, reliable up to tens-of-millions of key press...

LB-00101

Breakaway header is like the duct tape of electronics. Its great for connecting things together, soldering to perf-boards, fits into any breadboard...

AF-1540

Need lots? 1/4W Resistor Pack 30 kinds total 600pcs    •  1/4W metal film resistor package •  1% tolerance •  30 kinds of resistance /  20 of ...

LB-LR0309-1

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, ...

SF-COM-08374

These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadbo...

AF-805

If we could eat headers, we'd have them for breakfast, lunch, and dinner.  But we can't :( So we're making the best of it and selling them!This 2x2...

AF-2822

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 330Ohm resistors make excellent LED current limiter...

SF-COM-08377

Medium-sized clicky momentary switches are standard input "buttons" on electronic projects. These work best in a PCB but can be used on a solderles...

AF-1119

These 0.1″/2.54mm-pitch header strips are commonly used as low-cost connectors. The standard spacing allows use with solderless breadboards, perf...

PL-1065

Overview The D24V22Fx family of step-down voltage regulators generates lower output voltages from input voltages as high as 36 V. They are...

PL-2858

These pins can be crimped on wires and snapped into our crimp connector housings to create custom cables that are compatible with standard 0.1"-pi...

PL-1930

These 0.1″/2.54mm-pitch header strips are commonly used as low-cost connectors. The standard spacing allows use with solderless breadboards, perf...

PL-965

Need mini push buttons?  Sick of the same old black colour.  Add excitement to your life with 160 Mini push buttons in 8 different colours held in ...

LB-LS0199

This is a blue colored 40 Pin 2.54 mm (0.1") single row pin header strip from DFRobot. These 0.1" header strips are commonly used as low-cost Ardu...

DF-FIT0084

These pins can be crimped on wires and snapped into our crimp connector housings to create custom cables that are compatible with standard 0.1"-pi...

PL-1931

Miniature Single Pole Single Throw switches. These are high quality Omron type B3F momentary on switches. Perfect as a tactile reset switch. Mou...

DF-FIT0179

Colour-coded GPIO pins that make locating that ground or power connection you need super simple!These 40-pin 2x20 male headers from our friends at ...

PI-COM1111

The Cherry MX Blue switch is a light, tactile, clicky mechanical keyboard switch in the Cherry MX family. Keyboards with these switches often have ...

LB-00022

Headers are like the duct tape of electronics. They're great for connecting things together, soldering to perf-boards, sockets for wires or break-a...

AF-3366

ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you! This is a 25 Pack of 2...

AF-2780

Single row of 40-holes, female header. Can be cut to size with a pair of wire-cutters. Standard .1" spacing. We use them extensively in our SparkFu...

SF-PRT-00115

Overview These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with var...

PL-1903

These 0.1″/2.54mm-pitch header strips are commonly used as low-cost connectors. The standard spacing allows use with solderless breadboards, perf...

PL-967

Overview These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with var...

PL-1900

These are our favorite trim pots, perfect for breadboarding and prototyping. They have a long grippy adjustment knob and with 0.1" spacing, they pl...

AF-356

Need to add analog inputs? This chip will add 8 channels of 10-bit analog input to your microcontroller or microcomputer project. It's super easy t...

AF-856

It’s your basic black action button! This is a very useful, small, panel-mount momentary switch. It is a SPST N.O. with the threaded portion being ...

SF-COM-11996

Resistors are a good thing, in fact, they’re actually crucial in a lot of circuit designs. The only problem seems to be that resistors disappear in...

SF-COM-10969

Hey, listen up! It's the world's smallest USB microphone! OK maybe it's not in the Guinness Record Book, but it is pretty darn small! This plug-and...

AF-3367

These 40-pin 2x20 male headers can be used on a Pi Zero or a pHAT to break out the pins.You can choose either straight or at a 90° angle.Add one to...

PI-COM1101

Piezo buzzers are used for making beeps, tones and alerts. This one is petite but loud! Drive it with 3-30V peak-to-peak square wave. To use, conne...

AF-160

This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a fairly standard linear taper 10K ohm potentiometer, with a grippy ...

AF-562

The Cherry MX Green switch is a medium stiff, tactile, clicky mechanical keyboard switch in the Cherry MX family. The Cherry MX Green is both a tac...

LB-00007

Overview These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with var...

PL-1902

Overview These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with var...

PL-1901

Cherry MX Keyswitches are top-of-the-line mechanical keyboard switches. They’re satisfyingly “clicky”, reliable up to tens-of-millions of key press...

LB-00100

This 2x20 male header has the same number and spacing of pins as a Raspberry Pi but is best served when used in conjunction with the Pi Zero since ...

SF-PRT-14275

This kit includes JST XHP-2, XHP-3 and XHP-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 un...

DF-FIT0255