ITead Australia

Overview The MAX682/MAX683/MAX684 charge-pump regulators generate 5V from a 2.7V to 5.5V input. They are specifically designed to serve as high-eff...

IT-IM130304044

Overview The MAX1684/MAX1685 are high-efficiency, internal-switch, PWM step-down switching regulators intended to power cellular phones, communicat...

IT-IM130304041

Overview The MAX1708 sets a new standard of space savings for high-power, step-up DC-DC conversion. It delivers up to 10W at a fixed (3.3V or 5V) o...

IT-IM130304040

Overview The LM1577/LM2577 are monolithic integrated circuits that provide all of the power and control functions for step-up (boost), flyback, and...

IT-IM130304031

Overview Here's a breadboard without power tails.With a total of 630 tie in points, all pins are spaced by a standard 0.1". This board also has a s...

IT-IM120530020

Overview The MAX8505 step-down regulator operates from a 2.6V to 5.5V input and generates an adjustable output voltage from 0.8V to 0.85 ✕ VIN at u...

IT-IM130304028

Overview The PTH04070W is a highly integrated, low-cost switching regulator module that delivers up to 3A of output current.Occupying less PCB area...

IT-IM130304027

Overview When more than 2 power rails are required, this Breadboard(16.5 x 1cm) can be combined with a full size breadboard(16.5 x 5.3cm) to achie...

IT-IM120530019

Overview The L6562A is a current-mode PFC controller operating in Transition Mode (TM). Coming with the same pin-out as its predecessors L6561 and ...

IT-IM130304026

Overview The LM3224 is a step-up DC/DC converter with a 0.15 Ω (typ.), 2.45A (typ.) internal switch and pin selectable operating frequency. With th...

IT-IM130304025

Overview Here's a breadboard without power tails.With a total of 300 tie in points, all pins are spaced by a standard 0.1". This board also has a s...

IT-IM120530018

Overview The LM2596 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching ...

IT-IM130304014

Overview The LM2841 and LM2842 are PWM DC/DC buck (step-down) regulators. With a wide input range from 4.5V-42V, they are suitable for a wide range...

IT-IM130304009

Overview When more than 2 power rails are required, this Breadboard(8.3 x 1cm) can be combined with a half size breadboard(8.3 x 5.5cm) to achieve...

IT-IM120530017

Overview As a member of the SWIFT™family of DC/DC regulators, the TPS5450 is a high-output-current PWM converter that integrates alow resistance hi...

IT-IM130304007

Overview A modern solderless breadboard consists of a perforated block of plastic with numerous tin plated phosphor bronze or nickel silver alloy ...

IT-IM120530016

Overview The LM2575 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching ...

IT-IM130304006

DC-DC - LM2576T-ADJ

IT-IM130304005

Overview As a member of the SWIFT™ family of DC/DC regulators, the TPS5430 is a high-output-current PWM converter that integrates alow resistance h...

IT-IM130304003

Overview A modern solderless breadboard consists of a perforated block of plastic with numerous tin plated phosphor bronze or nickel silver alloy s...

IT-IM120530015

This is a short GSM Antenna . It comes with the interface cable which has SMA Plug with Straight Angle.

IT-IM130302001

Overview Character LCM screen is a common display device, we provide 16×2, 8×2, 20×4 with Yellow / Blue black light LCD. But these LCD need more th...

IT-IM130129002

This is a 3-pin XH2.54 to DuPont wire cable. The XH2.54-3P terminal make it perfect to connect electronic bricks or modules which have XH2.54-3P s...

IT-IM120530014

Overview Character LCM screen is a common display device, we provide 16×2, 8×2, 20×4 with Yellow / Blue black light LCD. But these LCD need more th...

IT-IM130129001

This is a simple cross 4-pin wire cable which can be used to connect some electronic bricks or modules with sensor shield. Different to Parallel 4-...

IT-IM120530013

This is a simple Parallel 4-pin wire cable which can be used to connect some electronic bricks or modules with sensor shield.

IT-IM120530012

Overview The ADP3331 is a member of the ADP330x family of preci-sion low dropout anyCAP voltage regulators. The ADP3331 operates with an input volt...

IT-IM130128100

This is a simple 3-pin wire cable and usually connected to electronic bricks or modules which have standard 0.1" breakaway male headers. And its 3-...

IT-IM120530011

Overview The AIC1722 is a 3-pin low dropout linear regulator. The superior characteristics of the AIC1722 include zero base current loss, very low ...

IT-IM130128099

This is a usefull USB cable for Arduino fanciers - type A to Barrel Jack Adapter. It can be used to power Arduino or Arduino Mega by plugging into ...

IT-IM120530010

Overview The AME8822 family of positive, linear regulators feature low quiescent current (30mA typ.) low dropout voltage and excellent PSRR, thus m...

IT-IM130128098

This is an important USB cable for Arduino fanciers - type A to type B. It's needed to connect Arduino or Arduino Mega with your computer. It's a 1...

IT-IM120530009

Passive Power Over Ethernet Cable is applicable for wide range of network products - AP, Routers, IP cameras, modems, switches, embedded computers ...

IT-IM120530008

Overview The MAX1818 low-dropout linear regulator operates from a +2.5V to +5.5V supply and delivers a guaranteed 500mA load current with low 120mV...

IT-IM130128086

Overview AP1084 is a low dropout positive adjustable or fixed-mode regulator with minimum of 5.0A output current capability. The product is specifi...

IT-IM130128085

This is a popular USB cable - type A to type Mini. No matter connecting arduino main boards to your computer ,or for the connection between a usb s...

IT-IM120530007