ITead Australia

Overview The DHT-22 is a low cost humidity and temperature sensor with a single wire digital interface. The sensor is calibrated and doesn't requir...

IT-IM120712007

OverviewThis module is based on the very popular L298 Dual H-Bridge Motor Driver Integrated Circuit. The circuit will allow you to easily and indep...

IT-IM120606013

This is a 5V 4-Channels Relay module, It can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and MSP430.4...

IT-IM120525002

This is a 5V 2-Channels Relay module, It can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and MSP430.2...

IT-IM120525001

The 315MHz RF link kit is consisted of transmitter and receiver, popularly used for remote control. Features Frequency: 315Mhz Modulation: ASK Rece...

IT-IM120628013

The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse. EasyDriver requires a 7V ...

IT-IM120606012

This is a pack including 50pcs 100mm dual-female DuPont jumpers. It includes 5 colors jumper wires, 10 pcs for each color. They work great with bre...

IT-IM120530003

Overview It's a small USB to TTL serial tool, using the PL2303 chip. You can use it to connect some serial device to your PC via USB port.   This U...

IT-IM120525011

This is a 5V 8-Channels Relay module, It can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and MSP430. ...

IT-IM120525003

SIM808 module is a GSM and GPS two-in-one function module. It is based on the latest GSM/GPS module SIM808 from SIMCOM, supports GSM/GPRS Quad-Band...

IT-IM141125004

Overview Colorduino is an RGB LED dot-matrix driver compatible with Arduino . Colorduino pairs the M54564 with a single DM163 constant current dri...

IT-IM140806001

Overview Compared to Arduino, it's hard to find the shields and electronic brick customized for Raspberry Pi. This RPI Arduino Shield Add-on has e...

IT-IM140714004

Yes! We can build electronics projects just as easy as piling bricks. Arduino and community have made the programming much easier than ever before....

IT-IM120710006

OverviewIf you are sourcing a ultrasonic ranging module , the HC-SR04 is good choose . Its stable performance and high ranging accuracy make it a p...

IT-IM120628012

Overview This is a Waterproof DS18B20 Temperature Sensor/Thermometer. The probe uses original DS18B20 temperature sensor chip. It is waterproof, mo...

IT-IM130327002

Overview The Iteaduino Uno is a microcontroller board based on the Arduino UNO. It has 14 digital input/output pins (of which 6 can be used as PWM ...

IT-IM130312001

Overview This is a pack which includes 5pcs of 10 pin female header. We use this header on all our XBee series modules. They have 0.2mm spacing bet...

IT-IM120531001

This is a upgraded pack including 75pcs dual-male jumpers. It includes 4 different length: 250mm 5pcs 200mm 5pcs 150mm 10pcs 100mm 55pcs They are p...

IT-IM120530005

Overview Iteadmaple is a microcontroller board based on Leaf Maple. The Iteadmaple can achieve the maximum 72 MHz, it has 39 digital input/output p...

IT-IM120411012

OverviewIteaduino ADK Main Board is based on Android Open Accessory Development Kit(ADK). Using this ADK Main Board you can build your own mobile a...

IT-IM120411005

Overview What is an electronic brick? An electronic brick is an electronic module which can be assembled like Lego bricks simply by plugging in an...

IT-IM120710021

What is an electronic brick? An electronic brick is an electronic module which can be assembled like Lego bricks simply by plugging in and pulling ...

IT-IM120710008

Overview This is a power module for the standard bread board. Its concave design will not waste your proto zone. This breadboard power shield supp...

IT-IM120525004

IBridge-lite is a 3X3  key-pad shield with a 5110 Graphic LCD interface. It is compatible with Arduino, you can plug IBridge-lite on Arduino board ...

IT-IM120417023

Overview Dual stepper motor driver shield can drive 2 stepper motors at the same time by Arduino. It can work with the power supply from 4.75V to 3...

IT-IM120417015

OverviewSD Shield 3.0 is a break out board for standard SD and TF card. It is compatible with 5V and 3.3V Arduino mainboards, Arduino-compatible bo...

IT-IM140726001

Overview There are seldom OLED add-ons customized for Raspberry Pi in the open source hardware market. In a lot of projects, we only need to displ...

IT-IM140714003

IBridge V1.0 is a 4X4 key-pad shield with a 5110 Graphic LCD interface.You can plug it on Arduino boards directly, and you can get the small develo...

IT-IM120417001

Overview Iteaduino Tiny is a mini development board based on Attiny85-20 master, which is cheap, compact and easy to use with low power consumption...

IT-IM130615003

What is an electronic brick? An electronic brick is an electronic module which can be assembled like Lego bricks simply by plugging in and pulling ...

IT-IM121211001

This protoboard has flawless quality.Its pads are on double side.It has finely drilled and no odor.The protoboard is tough.The holes are clean.Spec...

IT-IM121207002

Overview This protoboard has flawless quality.Its pads are on double side.It has finely drilled and no odor.The protoboard is tough.The holes are c...

IT-IM121207001

Overview This is a 13.56Mhz Water Droplets Transparent NFC Smart Tag for Android. It is rewritable and waterproof. This RFID tag is compatible with...

IT-IM130601001

This is the bare PCB of Typhon Board.

IT-IM130529001

Overview This is a pack which includes 5pcs of 2×40-pin SMD male headers. They have 2.0mm spacing between pins and can be cut to any size. Specific...

IT-IM130522003

Overview This is a pack which includes 5pcs of 40-pin SMD male headers. They have 2.0mm spacing between pins and can be cut to any size. Specificat...

IT-IM130522002

Overview Non-invasive current transformer, use this sensor clip to build your own Personal Energy Monitor . Specification

IT-IM120628007

By tilting to different end, it acts On/Off like a switch.

IT-IM120712019

Overview The TCRT5000(L) has a compact construction where the emitting-light source and the detector are arranged in the same direction to sense th...

IT-IM120712017

Overview Non-invasive current transformer, use this sensor clip to build your own Personal Energy Monitor. Note: the model of this product is SCT-0...

IT-IM120712015

Overview Non-invasive current transformer, use this sensor clip to build your own Personal Energy Monitor . Specification

IT-IM120712013

Overview Non-invasive current transformer, use this sensor clip to build your own Personal Energy Monitor . Specification

IT-IM120712012

Overview Non-invasive current transformer, use this sensor clip to build your own Personal Energy Monitor . Specification

IT-IM120712011

Overview This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and has ...

IT-IM120712010

Overview This is a low cost digital compass with UART and IIC interface, it's easy to use with external controler like Arduino,IFLAT32. Features ...

IT-IM120712009