Jumpers and Wiring

This is a useful accessory for you when you need to connect female pins with male pins at some special occasions. Features Easy to plug Appropri...

SS-110990045

This is a cute half-size breadboard with an assortment of small jumper wires, great for prototyping. Breadboard is 2.2" x 3.4" (5.5 cm x 8.5 cm) wi...

AF-3314

Are you looking to jumper two neighboring male headers (2.54mm apart) without the hassle of maneuvering and re-maneuvering wires? Well then you've ...

AF-3525

When working with unusual non-header-friendly surfaces, these handy cables will be your best friends! No longer will you have long, cumbersome stra...

AF-4304

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1708

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1704

Our Raw Male/Male Jumper Wires are perfect for making a custom jumper wire sets for wire harnesses or jumpering between headers on PCB's. These pre...

AF-3142

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1759

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1754

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1753

These are 101mm long 26AWG jumpers with male connectors on both ends. Use these to jumper from any female header on any board to any other female h...

SF-PRT-14284

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1756

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1751

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1748

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1747

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1745

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1742

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1740

Rainbow coloured jumper strips, perfect for use with our mini breadboards! At just 100mm in length this jumper jerky is ideal for use on a breadboa...

PI-CAB0003

Rainbow coloured jumper strips, perfect for use with our mini breadboards!At just 100mm in length this jumper jerky is ideal for use on a breadboar...

PI-CAB0002

Rainbow coloured jumper strips, perfect for use with our mini breadboards! Each strip of jerky contains 40 individual jumper leads, 185mm long, whi...

PI-CAB0006

These are two pin jumpers (also called shunts) that will create an electrical connection for the 2.54mm(0.1") male pin headers. Commonly used to m...

DF-FIT0140

This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other...

SF-CAB-13685

This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends....

SF-PRT-10376

This is a simple six wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed be...

SF-PRT-10361

This kit is prefect for your circuit hook-ups.  With 10 Red, 10 Black and 10 Yellow Male to Male jumper wires you can easily lay out your circuits ...

LB-PT-JUMPER-KIT

These premium female-female jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They're 200mm (~7.8") long and c...

AF-4447

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1707

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1706

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (75mm) long and come in a 'strip' of 20 (2...

AF-1956

These Male/Male Jumper Wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) l...

AF-1957

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1732

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1730

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1710

Hook up simple circuits and components. The breadboards can hold LEDs and chips, and the Jumper Jerky will connect them to other components and the...

PR-PIM245

Jumper wires are one of the most important gear component for the tinkerer. Often underestimated, but one of the first things to miss. If you are s...

DF-FIT0121

This is a SparkFun exclusive! These are 155mm long jumpers terminated as male to female. Use these to jumper from any male or female header on any ...

SF-PRT-09139

This is a SparkFun exclusive! These are 155mm long jumpers with female connectors on both ends. Use these to jumper from any male header on any boa...

SF-PRT-08430

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-3830

These are 6" long jumper wires with male connectors on both ends. Use these to jumper from any female header on any board, to any other female head...

SF-PRT-12795

This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin Molex connector with 0.1" spac...

SF-PRT-09922

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 40 (...

AF-826

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1712

This is a upgraded pack including 75pcs dual-male jumpers. It includes 4 different length: 250mm 5pcs 200mm 5pcs 150mm 10pcs 100mm 55pcs They are p...

IT-IM120530005

Solid core hookup cable, which is the ideal size for breadboards. All you need to do is cut it to whatever lengths you require and strip th...

TB-WH3032

A mixed pack of jumper leads for your Arduino, breadboarding and prototyping projects.   * 30 Plug-Plug  * 40 Plug-So...

TB-WC6027

Three pin JST connector with red, black, and yellow colors. 5 inch wire outs. This cable comes fully assembled as shown and connects directly to ma...

SF-SEN-08733

This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends...

SF-PRT-10370