Audio in New Products

Capture sounds in stereo and store them safely away in your Raspberry Pi with Pirate Audio: Dual Mic. It has a matched pair of I2S microphones, a v...

PR-PIM524

If you want to get some sound out of your project but have a tight space budget, this is a good way to do it. This 0.5W, 8Ohm speaker is only 40mm ...

SF-COM-15350

This Breadboard Compatible Speaker (a Little Bird exclusive product) is perfect for use with a breadboard as it has jumper wires with standard head...

LB-SPEAKER

This versatile piezo-element module can be used for both input or output! It can be used as a noise-maker driven by your microcontroller for audibl...

FT-SOUND

Give your project ears with this sound response and sound pressure level sensing module. An integrated dual signal amplifier converts the sound to ...

FT-MIC

This nifty little USB dongle adds mono audio input and stereo output through USB (1.0). It's a cheap and cheerful solution for audio input to your ...

PI-ADP009

We designed this speaker kit as an add-on to our Pirate Radio Kit, for stereo sound, but it'll work with any small audio board that you want to add...

PR-PIM350

Turn your Pi into a Lilliputian ghetto blaster with Speaker pHAT!Speaker pHAT crams an I2S DAC and mono amplifier, a tiny 8Ω 2W speaker, and a 10 L...

PR-PIM254

The MonkMakes Speaker for micro:bit is a neat little amplified speaker that connects to your micro:bit using alligator clips. Features Amplified o...

PI-MNK00060

The MonkMakes Sensor Board for micro:bit allows you to sense sound level, temperature and light level. Features 3V and GND connections can be made...

PI-MNK00062

Build your very own internet-connected radio with the Pirate Radio Kit! This kit has everything* you'll need, including a Pi Zero W, our flash new...

PR-PIM261

*HONK* *HONK* micro:bit comin' thru! Maybe you've played with the micropython speech module, or maybe you want to have MakeCode sound effects. Well...

AF-3829

Compose a monophonic microbit musical masterpiece with the Kitronik :KLEF Piano for the BBC micro:bit. It features 15 capacitive touch pads, with 1...

KI-5631

Most modern headphone sets are purely digital - with three volume control buttons in-line with the cable. These headphones are interesting in that ...

AF-3959

Build your very own internet-connected radio with the Pirate Radio Kit! This kit has everything* you'll need, including a Pi Zero W, our flash new ...

PR-PIM261

This Breakout Board is Discontinued Now, We recommend Sound Sensors as a suitable replacement. Ready to add audio to your next project? This s...

DF-SEN0045

This fully-featured UDA1334A I2S Stereo DAC breakout is a perfect match for any I2S-output audio interface. It's affordable but sounds great! The N...

AF-3678

Your microcontroller probably has an ADC (analog -> digital converter) but does it have a DAC (digital -> analog converter)??? Now it can! Th...

AF-935

Unlock your inner Mozart with Piano HAT, a mini musical companion for your Raspberry Pi!Piano HAT is inspired by Zachary Igielman's PiPiano and mad...

PR-PIM095

The IQaudIO Pi-DigiAMP+. The First HAT compliant Full-HD (192/24) HiFi quality DAC & 2x20w Class D AMP for the Raspberry Pi. Turn your Raspberr...

PI-IQA002

The Pi-Digi+ plugs directly on the Raspberry Pi A+/B+/2/3, there’s no need to solder or modify your Raspberry Pi and you can be enjoying Full HD op...

PI-IQA003

The IQaudIO Pi-DAC+ audio card for the Raspberry Pi delivers outstanding sonic performance and full-HDaudio capability with build-in hardware volum...

PI-IQA001

Pi-DAC PRO, a new breed of audiophile DAC for the Raspberry Pi. With Phono (RCA), Heaphone (3.5mm) and support for Balanced / Differential output (...

PI-IQA004

If music be the food of love, play on. But make sure you use this super little DAC to get the best out of your Raspberry Pi audio!This pHAT provide...

PR-PIM138

This coupler is kind of like a really short RCA cable. We think its perfect for use with our NTSC/PAL displays since they already have a cable. So ...

AF-951

The ultimate audio add-on for your Pi! pHAT BEAT gives you high-quality, digital, amplified, stereo audio and 16 beautiful little RGB LEDs, in two ...

PR-PIM267

Make your micro:bit sing with noise:bit! It's a tiny speaker that packs a fair bit of punch, and it's perfect for BLEEPS and BLOOPS!Just slot in yo...

PR-PIM356

This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 3.7W channels into 3 ohm impedance speakers. Inside the minia...

AF-987

This panel mount cable will allow you to enclose a device that has an HDMI port. Perfect for placing your project in a secure box. Both ends have H...

AF-4054

One of the most common converter cables you'll want in your cable collection - this 6 foot long cable converts a standard 3.5mm stereo jack to two ...

AF-1013

This little USB microphone makes adding a mic. to your Raspberry Pi or computer super easy! It's ideal for adding basic sound capture to your proje...

PI-ADP008

This panel mount extension cable will allow you to extend an HDMI connection and secure it to an enclosure. Perfect for placing your Raspberry Pi i...

AF-978

Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz elect...

AF-1063

This electret capsule microphone is the same one we use in our great microphone amplifier board. It contains a small vibrating element that will ou...

AF-1064

If you have a computer or tablet or device with HDMI output but you want to connect it to a projector, monitor or display with VGA input, you have ...

AF-1151

Sometimes you just need an MP3 to play. Whether it’s a theme song as you enter the room or a power song when you are working out. The SparkFun Qwii...

SF-DEV-15165

This is the dual phono connector that our pHAT DAC is designed to work with.Simply place it into the landing provided on the PCB and solder it up f...

PI-COM1301

Hook up these 8 advanced capacitive touch pads with LED indicators to start making sublime beats and control surfaces with your Raspberry Pi.Drum H...

PR-PIM141

VGA cable, for connecting this VGA device to that VGA display. 1.5 meters long, two male DB-15 connector on either end with embedded ferrites

AF-1301

Here is a gorgeous metal-covered audio cable straight from Blade Runner/cyberpunk heaven. And we have them in a couple different colors! They're a ...

AF-4068

Here is a gorgeous metal-covered audio cable straight from Blade Runner/cyberpunk heaven. And we have them in a couple different colors! They're a ...

AF-4067

Here is a gorgeous metal-covered audio cable straight from Blade Runner/cyberpunk heaven. And we have them in a couple different colors! They're a ...

AF-4066

Here is a gorgeous metal-covered audio cable straight from Blade Runner/cyberpunk heaven. And we have them in a couple different colors! They're a ...

AF-4069

Listen up! This 3" diameter speaker cone is the perfect addition to any audio project where you need an 8 ohm impedance and 1W or less of power. We...

AF-1313

Listen up! This 3" diameter speaker cone is the perfect addition to any audio project where you need an 4 ohm impedance and 3W or less of power. We...

AF-1314

Connect an HDMI device with a micro HDMI port to one with a regular size HDMI port together with this basic HDMI cable. It has nice molded grips fo...

AF-1322

Pipe audio in or out of your project with this very handy breadboard-friendly audio jack. It's a stereo jack so you get left and right channels as ...

AF-4031