Robotics in New Products

Overview This Arduino shield from Adafruit contains 40 individually addressable RGB LEDs arranged in a 5×8 matrix, and it only takes one pin t...

PL-2772

Overview SparkFun Weather Shield for Arduino with quarter for size reference. SparkFun’s Weather Shield for Arduino can be used to build an ...

PL-2771

Adafruit Data Logging Shield for Arduino, top view. Adafruit Data Logging Shield for Arduino, bottom view with board dimensions. Overview...

PL-2770

This is just about the cutest, tiniest little micro servo we could find, even smaller than the 9 gram micro servos we love so much.  It can rotate ...

AF-2201

Raspberry Pi 1 Model A+, top view. Raspberry Pi 1 Model A+, bottom view. Overview The Raspberry Pi is a credit card-sized computer. The Ras...

PL-2760

OverviewThe Raspberry Pi is a credit card-sized computer. The Raspberry Pi 3 Model B is the third generation Raspberry Pi. It is based on the BCM28...

PL-2759

Overview This motor driver board is an add-on for a compatible Raspberry Pi (Model B+ or newer), including the Pi 3 Model B+ and Model A+, tha...

PL-2756

Overview This motor driver board is an add-on for a compatible Raspberry Pi (Model B+ or newer), including the Pi 3 Model B+ and Model A+, tha...

PL-2755

Pololu DRV8835 dual motor driver board for Raspberry Pi, top view with dimensions. Overview This motor driver kit and its corresponding P...

PL-2753

Overview This stackable 40-pin female header features two rows of 20 pins spaced with a standard 0.1″ (2.54 mm) pitch; this spacing is the same as...

PL-2749

Overview This stackable 40-pin female header features two rows of 20 pins spaced with a standard 0.1″ (2.54 mm) pitch; this spacing is the same as...

PL-2748

Overview This stackable 26-pin female header features two rows of 13 pins spaced with a standard 0.1″ (2.54 mm) pitch; this spacing is the same as...

PL-2747

XYZrobot 6 DOF Robotic Arm holding a AA battery and next to a 12 oz. soda can for scale. Overview Build your own advanced robot arm with the...

PL-2743

Overview Build your own advanced humanoid robot with the Bolide Y-01 DIY kit from XYZrobot! It features 18 smart servos, each with 330° of ef...

PL-2734

The DRV2605 from TI is a fancy little motor driver. Rather than controlling a stepper motor or DC motor, its designed specifically for controlling ...

AF-2305

PL-2716

PL-2714

Overview These aluminum hexagonal standoffs are just the right size for mounting expansion PCBs or HATs with standard-size female headers on a...

PL-2713

PL-2699

PL-2698

PL-2697

PL-2696

PL-2695

PL-2694

These universal mounting hubs are designed to work with most 8 mm diameter shafts, including round shafts and “D” shafts. Each of the two include...

PL-2693

This ball caster is an improved version of our original Pololu Ball Caster with 1″ Plastic Ball; we recommend this new version over the older vers...

PL-2692

This ball caster is an improved version of our original Pololu Ball Caster with 1″ Plastic Ball; we recommend this new version over the older vers...

PL-2691

Details for item #2690 The lead screw built into this stepper motor extends 38 cm (15″) from the face of the stepper motor and weighs 415 g (14.6 ...

PL-2690

Details for item #2689 The lead screw built into this stepper motor extends 18 cm (7″) from the face of the stepper motor and weighs 352 g (12.4...

PL-2689

Add even more power to your robot with this metal-geared servo. The tiny little servo can rotate approximately 180 degrees (~90 in each direction),...

AF-2307

Traveling Nut for TR8×8(P2) Threaded Rod. When the nut is prevented from rotating, it travels up or down the rod as the motor rotates. ...

PL-2688

Overview These light-weight aluminum shaft adapters convert a typical motor output shaft into a 12 mm hex shaft that is compatible with many commo...

PL-2687

Overview These light-weight aluminum shaft adapters convert a typical motor output shaft into a 12 mm hex shaft that is compatible with many commo...

PL-2686

Overview These light-weight aluminum shaft adapters convert a typical motor output shaft into a 12 mm hex shaft that is compatible with many commo...

PL-2684

Overview These light-weight aluminum shaft adapters convert a typical motor output shaft into a 12 mm hex shaft that is compatible with many commo...

PL-2682

Overview These plastic mounting brackets are specifically designed to work with our mini plastic gearmotors (with or without encoders). Both the ...

PL-2681

Overview These plastic mounting brackets are specifically designed to work with our mini plastic gearmotors (with or without encoders). Both the ...

PL-2680

Overview These lightweight brackets are made from 0.8mm-thick aluminum and are specifically designed to work with Sharp’s analog GP2Y0A02, GP2Y0A2...

PL-2679

Overview These lightweight brackets are made from 0.8mm-thick aluminum and are specifically designed to work with Sharp’s analog GP2Y0A02, GP2Y0A2...

PL-2678

Overview These lightweight brackets are made from 0.8mm-thick aluminum and are specifically designed to work with Sharp’s analog GP2Y0A02, GP2Y0A2...

PL-2677

Pololu 25D mm gearmotor with bracket. These light-weight brackets (8.5 g each) are specifically designed for the Pololu 25D mm metal gearmot...

PL-2676

The Hummingbird Duo Premium Robotics Kit is a spin-off product of Carnegie Mellon's CREATE lab. Hummingbird is designed to enable engineering and r...

AF-2320

Overview This compact aluminum adapter assembly makes it easy to use many common scooter, skateboard, and inline skate wheels with motors with...

PL-2674

Overview This compact aluminum adapter assembly makes it easy to use many common scooter, skateboard, and inline skate wheels with motors with...

PL-2673

Overview This compact aluminum adapter assembly makes it easy to use many common scooter, skateboard, and inline skate wheels with motors with...

PL-2672

These light-weight brackets (approximately 2.5 g each) are specifically designed for our larger Pololu plastic gearmotors (228:1 offset, 120:1 of...

PL-2671

These light-weight brackets (approximately 2 g each) are specifically designed for our larger Pololu plastic gearmotors (228:1 offset, 120:1 offs...

PL-2670