Robotics in New Products

Overview The RoboClaws from Ion Motion Control (formerly Orion Robotics) are a family of efficient, versatile, synchronous regenerative motor cont...

PL-2398

These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 210:1 and operate up to 12 volts and have a sta...

SF-ROB-12281

Overview The RoboClaw from Ion Motion Control (formerly Orion Robotics) is an efficient, versatile, dual-channel synchronous regenerative motor co...

PL-2397

Overview The RoboClaws from Ion Motion Control (formerly Orion Robotics) are a family of efficient, versatile, synchronous regenerative motor cont...

PL-1499

These orange “skate” wheels have an outer diameter of 4.90”, an inner diameter of 0.87”, and a width of 0.94”. When used in conjunction with the sk...

SF-ROB-12280

Overview The RoboClaw from Ion Motion Control (formerly Orion Robotics) is an efficient, versatile, dual-channel synchronous regenerative motor co...

PL-2396

These 2" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating ...

SF-ROB-12279

These lipped Rubber Rings have an inner diameter of 5.65", a width of ¼", and a sturdy rubber sidewall. These rings can be used as a replacement fo...

SF-ROB-12278

These linkages use 6-32 screw rod (not included) to create custom arms for just about any application. They have a ¼" free-moving ball (with a 0.14...

SF-ROB-12277

Overview The RoboClaw from Ion Motion Control (formerly Orion Robotics) is an efficient, versatile, dual-channel synchronous regenerative motor co...

PL-2395

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows t...

SF-ROB-12276

Note: This RoboClaw 2x5A has been replaced by the slightly improved 2x7A. The 2x7A can supply up to 7.5 A continuous and 15 A peak, up from 5 A a...

PL-2394

These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts, or...

SF-ROB-12275

These controllers have been replaced by the RoboClaw 2x15A (V5) and RoboClaw 2x30A (V5). Overview The RoboClaw from Ion Motion Control (formerly O...

PL-2393

These hubs are ideal for attaching wheels, gears, or any heavy duty servo horns directly to your 3F Futaba servo spline. These aluminum servo hubs ...

SF-ROB-12274

We're keepin' it wheel with this one!Need a great drive solution for your little robotic friends? This black plastic Micro Continuos Rotation Servo...

AF-2744

Note: This product has been replaced by the Roboclaw 2x30A with USB (V4), which adds a USB interface but is otherwise identical to this version. O...

PL-1494

These 10" long stainless steel shafts have a diameter of 5/16". These shafts are solid, which makes them an ideal choice for axles. These shafts ha...

SF-ROB-12273

Note: This product has been replaced by the Roboclaw 2x15A with USB (V4), which adds a USB interface but is otherwise identical to this version. O...

PL-1493

This “boosted” servo extension board allows up to four different servos to be plugged into it and transfer data up to through a common CAT6 cable b...

SF-ROB-12272

This controller has been replaced by the RoboClaw 2x5A (V5). Overview The RoboClaw from Ion Motion Control (formerly Orion Robotics) is an efficie...

PL-1492

This swivel mount works in conjunction with the clamping swivel motor mounts (see below). A ¼-20 lock-nut holes the motor in place, while 6-32 tapp...

SF-ROB-12271

These controllers have been replaced by the RoboClaw 2x15A (V5) and RoboClaw 2x30A (V5). Overview The RoboClaw from Ion Motion Control (formerly O...

PL-2392

These plastic shaft spacers have an inner diameter of 5/8” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bear...

SF-ROB-12269

The Tamiya 72008 4-Speed Worm Gearbox kit includes one brushed DC motor and all the gears and parts to build any of the four possible gear ratio c...

PL-2391

These 6" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating ...

SF-ROB-12268

These round pillow block bearing mounts attach to the outside of a channel and have a ball bearing with a 1” bore for shafts and tubes. These beari...

SF-ROB-12267

These channel brackets (C type) provide you with an attachment point for a channel mountable gearbox kit. They share the same 0.5" center hole and ...

SF-ROB-12266

These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears have 64 teeth with a ge...

SF-ROB-12265

These clamping hubs are a great and cost-effective choice when attaching hub mount gears or wheels to shafts or tubes and can be a better option th...

SF-ROB-12264

The Tamiya 70170 Remote Control Construction Set includes all the Tamiya parts necessary to make your own tracked chassis. Assemble the crawler w...

PL-2389

These 1" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a...

SF-ROB-12263

These standard gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anything else that needs to ...

SF-ROB-12262

The Tamiya 70162 Remote Control Construction Set includes all the Tamiya parts necessary to make your own wheeled chassis. Attach either an arm, ...

PL-2388

These flat bearing mounts attach to the face of a channel or plate and have a ball bearing with a 3/8” bore for shafts. They can be used in conjunc...

SF-ROB-12260

These 1" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a...

SF-ROB-12259

These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 12 teeth with a g...

SF-ROB-12258

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-2386

These 4" long stainless steel shafts have a diameter of 5/16". These shafts are solid, which makes them an ideal choice for axles. These shafts hav...

SF-ROB-12257

These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears have 76 teeth with a ge...

SF-ROB-12256

These 10" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". When used with the matin...

SF-ROB-12254

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-2385

These 12" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06". When used with the ma...

SF-ROB-12253

These side mount brackets can function as mounts for endcaps for Actobotics channels. They have two untapped holes spaced 0.44" apart perpendicular...

SF-ROB-12252