Robotics in New Products

These are standard screws with 2-56 thread and 3/8" long, recommended for the small button pad sets. Can be used with a 2-56 nut. Sold in single ...

SF-PRT-08993

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-2366

This servo plate provides a mounting ring for your ¼-sscale servo. Four 6-32 tapped holes hold the servo in place, while 12 holes surrounding the p...

SF-ROB-12200

This hub adapter lets you connect Actobotics parts with a 0.77" hub pattern to parts with a 1.5" hub pattern. The holes for the 1.5" pattern altern...

SF-ROB-12199

New versions available! We have replaced these older short-shaft versions of our 20D mm gearmotors with a much wider assortment of gear ratios th...

PL-1450

These aluminum beams are great for making unique links and connections in your Actobotics project thanks to 17 through-holes running its length and...

SF-ROB-12198

We use this motor driver in our VNH5019 motor driver carrier and our dual VNH5019 motor driver shield for Arduino. We also carry boards based on ...

PL-1449

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-2365

These 12" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tu...

SF-ROB-12197

Set screw hubs offer a cheap way to attach hub mount gears or wheels to a shaft. The hub offers 4 equally spaced 6-32 tapped holes utilizing the 0....

SF-ROB-12196

Overview Discontinuation notice: These gearmotors have been replaced by functionally identical versions with plastic end caps over the encoders (t...

PL-1447

These clear precision disk wheels have an outer diameter of 2”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal ...

SF-ROB-12195

This crossover plate attaches to other Actobotics products and makes attaching to 1" tubing easy. The inner section has a 1.5" hub pattern and has ...

SF-ROB-12194

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-2364

Overview Discontinuation notice: These gearmotors have been replaced by functionally identical versions with plastic end caps over the encoders (t...

PL-1446

This motor mount connects to other Actobotics products with a swivel mount, allowing you to easily attach your motor to gears or pulleys. A set scr...

SF-ROB-12192

These zinc-plated socket head machine screws are 1-3/8"” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/...

SF-ROB-12191

The MOTORplate from Pi-Plates brings a suite of professional motion control features to your Raspberry Pi. These plates can each control a combinat...

SF-DEV-14149

These 7" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a...

SF-ROB-12189

Overview Discontinuation notice: These gearmotors have been replaced by functionally identical versions with plastic end caps over the encoders (t...

PL-1445

These 45 degree hub mounts mate directly to Actobotics channels in multiple positions and are useful as attachment points for shafts and tubes with...

SF-ROB-12188

This ball caster kit from Pololu includes a black ABS housing, a 3/8" diameter metal ball, two spacers (1/16" and 1/8" thick), and two #2 screw set...

SF-ROB-08909

If you need a solid base for your Actobotics project, the round base is perfect. It’s nearly 4" in diameter and 1/8" thick aluminum. It utilizes bo...

SF-ROB-12187

INTRODUCTION Shape Memory metals that were developed by NASA for the space industry, and have been used for increasing...

DF-FIT0256

These channel brackets (B type) mate directly to Actobotics channels and hub mounts and are useful as attachment points for offsetting heavy duty w...

SF-ROB-12186

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-2361

Overview Discontinuation notice: These gearmotors have been replaced by functionally identical versions with plastic end caps over the encoders (t...

PL-1444

This custom-designed plastic wheel from Pololu has a silicone tire measuring 1.26" (32 mm) in diameter and is designed to fit the output shafts on ...

SF-ROB-08901

These 8" long stainless steel shafts have a diameter of 5/16". These shafts are solid, which makes them an ideal choice for axles. These shafts hav...

SF-ROB-12185

This custom-designed plastic wheel from Pololu has a rubber tire measuring 1.65" (42 mm) in diameter and is designed to fit the output shafts on ou...

SF-ROB-08899

These servo gears are made specifically to fit a Futaba 3F servo spline, allowing you to mate other gears to your servo. They have 20 teeth with a ...

SF-ROB-12184

These 10" long aluminum tubes have an outer diameter of ½", an inner diameter of 0.444", and a wall thickness of 0.03". When used with the mating t...

SF-ROB-12183

Overview Discontinuation notice: These gearmotors have been replaced by functionally identical versions with plastic end caps over the encoders (t...

PL-1443

Shape Memory metals that were developed by NASA for the space industry, and have been used for increasing applications down on earth.For example...

DF-FIT0257

These 2" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". When used with the mating...

SF-ROB-12182

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-2360

These dolly wheel drive plates provide you with a way to create an easy to assemble, low friction, drive system. The idler A type plates are design...

SF-ROB-12181

INTRODUCTION Shape Memory metals that were developed by NASA for the space industry, and have been used for increasing...

DF-FIT0258

This motor mount connects to other Actobotics products with a swivel mount, allowing you to easily attach your motor to gears or pulleys. A set scr...

SF-ROB-12180

Overview Discontinuation notice: These gearmotors have been replaced by functionally identical versions with plastic end caps over the encoders (t...

PL-1442

These 9" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts hav...

SF-ROB-12179

These 9" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a...

SF-ROB-12178

26:1 sub-micro plastic planetary gearmotor next to a micro metal gearmotor and a LEGO Minifigure for size reference. Sub-micro plastic pla...

PL-2359

This “non-boosted” servo extension board allows up to four different servos to be plugged into it and transfer data up to through a common CAT6 cab...

SF-ROB-12176