Robotics in New Products

These 2" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when u...

SF-ROB-12290

These standard gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anything else that needs to ...

SF-ROB-12288

Pololu 5" round robot chassis RRC04A with an Orangutan SV-328 and a QTR sensor array. Overview The 5" robot chassis RRC04A is an 1/8" acryli...

PL-1501

These single channel 90 degree angle brackets mate directly to Actobotics channels and hub mounts and are useful as attachment points. They share t...

SF-ROB-12287

This is a simple, but very powerful stepper motor with a 4-wire cable attached. This is a Bipolar Motor. Features: Step Angle (degrees) :1.8 2...

SF-ROB-09238

These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 298:1 and operate up to 12 volts and have a sta...

SF-ROB-12285

Pololu 5" round robot chassis RRC04A with an Orangutan SV-328 and a QTR sensor array. Overview The 5" robot chassis RRC04A is an 1/8" acryli...

PL-1500

Overview Note: This RoboClaw 2x7A (V5) has been replaced by the slightly improved 2x7A (V5B), which features a more powerful BEC regulator capabl...

PL-2399

These ½" bore hub spacers allow you to space your sprocket, gear, wheel, or other attachment from the mating hub. These hubs utilize the 0.77" hole...

SF-ROB-12284

These square pillow block bearing mounts attach to the inside of a channel and have a ball bearing with a 1” bore for shafts and tubes. These beari...

SF-ROB-12282

Overview The RoboClaws from Ion Motion Control (formerly Orion Robotics) are a family of efficient, versatile, synchronous regenerative motor cont...

PL-2398

These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 210:1 and operate up to 12 volts and have a sta...

SF-ROB-12281

Overview The RoboClaw from Ion Motion Control (formerly Orion Robotics) is an efficient, versatile, dual-channel synchronous regenerative motor co...

PL-2397

Overview The RoboClaws from Ion Motion Control (formerly Orion Robotics) are a family of efficient, versatile, synchronous regenerative motor cont...

PL-1499

These orange “skate” wheels have an outer diameter of 4.90”, an inner diameter of 0.87”, and a width of 0.94”. When used in conjunction with the sk...

SF-ROB-12280

Overview The RoboClaw from Ion Motion Control (formerly Orion Robotics) is an efficient, versatile, dual-channel synchronous regenerative motor co...

PL-2396

These 2" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating ...

SF-ROB-12279

These lipped Rubber Rings have an inner diameter of 5.65", a width of ¼", and a sturdy rubber sidewall. These rings can be used as a replacement fo...

SF-ROB-12278

These linkages use 6-32 screw rod (not included) to create custom arms for just about any application. They have a ¼" free-moving ball (with a 0.14...

SF-ROB-12277

Overview The RoboClaw from Ion Motion Control (formerly Orion Robotics) is an efficient, versatile, dual-channel synchronous regenerative motor co...

PL-2395

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows t...

SF-ROB-12276

Note: This RoboClaw 2x5A has been replaced by the slightly improved 2x7A. The 2x7A can supply up to 7.5 A continuous and 15 A peak, up from 5 A a...

PL-2394

These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts, or...

SF-ROB-12275

These controllers have been replaced by the RoboClaw 2x15A (V5) and RoboClaw 2x30A (V5). Overview The RoboClaw from Ion Motion Control (formerly O...

PL-2393

These hubs are ideal for attaching wheels, gears, or any heavy duty servo horns directly to your 3F Futaba servo spline. These aluminum servo hubs ...

SF-ROB-12274

We're keepin' it wheel with this one!Need a great drive solution for your little robotic friends? This black plastic Micro Continuos Rotation Servo...

AF-2744

Note: This product has been replaced by the Roboclaw 2x30A with USB (V4), which adds a USB interface but is otherwise identical to this version. O...

PL-1494

These 10" long stainless steel shafts have a diameter of 5/16". These shafts are solid, which makes them an ideal choice for axles. These shafts ha...

SF-ROB-12273

Note: This product has been replaced by the Roboclaw 2x15A with USB (V4), which adds a USB interface but is otherwise identical to this version. O...

PL-1493

This “boosted” servo extension board allows up to four different servos to be plugged into it and transfer data up to through a common CAT6 cable b...

SF-ROB-12272

This controller has been replaced by the RoboClaw 2x5A (V5). Overview The RoboClaw from Ion Motion Control (formerly Orion Robotics) is an efficie...

PL-1492

This swivel mount works in conjunction with the clamping swivel motor mounts (see below). A ¼-20 lock-nut holes the motor in place, while 6-32 tapp...

SF-ROB-12271

These controllers have been replaced by the RoboClaw 2x15A (V5) and RoboClaw 2x30A (V5). Overview The RoboClaw from Ion Motion Control (formerly O...

PL-2392