Robotics in New Products

Zumo reflectance sensor array with labeled sensors and dimensions. Overview The Zumo reflectance sensor array provides an easy way to add li...

PL-1419

ServoBlocks increase a servo’s load-bearing capabilities by helping to isolate the lateral load from the servo spline and case. The extreme versati...

SF-ROB-12120

Overview The Light-Duty (LD) series of Glideforce linear actuators by Concentric International (formerly Iowa Export-Import) are 12V DC gearmo...

PL-2312

Overview The Zumo chassis kit contains the components necessary to build a small, high-performance tracked robot platform that is compact enough t...

PL-1418

This is a most powerful standard servo motor from DFRobot so far. A servomotor is a rotary actuator that allows precise control of angular posit...

DF-SER0030

Overview The Light-Duty (LD) series of Glideforce linear actuators by Concentric International (formerly Iowa Export-Import) are 12V DC gearmo...

PL-2311

Discontinuation notice: These 22T and 30T tracks have been replaced by newer versions with improved sprockets. Each length is now available in th...

PL-1416

These 4" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when u...

SF-ROB-12118

These 12" long aluminum tubes have an outer diameter of ½", an inner diameter of 0.444", and a wall thickness of 0.03". When used with the mating t...

SF-ROB-12117

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows t...

SF-ROB-12116

Overview The Light-Duty (LD) series of Glideforce linear actuators by Concentric International (formerly Iowa Export-Import) are 12V DC gearmo...

PL-2310

These un-threaded aluminum clamping hubs are perfect for standard applications that need shafting or tubing 1" in diameter secured safely. These cl...

SF-ROB-12114

Discontinuation notice: These 22T and 30T tracks have been replaced by newer versions with improved sprockets. Each length is now available in th...

PL-1415

This mounting bracket is designed for Sharp GP2D12/2D15/Sharp GP2Y0A02YK IR ranger sensor. You can buy this item using 250 reward points. S...

DF-FIT0005-OE

Overview These idlers have 3.5 mm diameter circular holes that allow them to spin freely when used with the included shoulder bolts or similar mou...

PL-1412

These 2" long aluminum tubes have an outer diameter of ½", an inner diameter of 0.444", and a wall thickness of 0.03". When used with the mating tu...

SF-ROB-12113

These plastic shaft spacers have an inner diameter of 1/2” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bear...

SF-ROB-12112

Overview The Light-Duty (LD) series of Glideforce linear actuators by Concentric International (formerly Iowa Export-Import) are 12V DC gearmo...

PL-2309

Internet of things has become so easy. With Xboard Relay, you can not only monitor data through internet, but also control it through internet....

DF-DFR0222

Overview These idlers have 3.5 mm diameter circular holes that allow them to spin freely when used with the included shoulder bolts or similar mou...

PL-1411

These pinion gears attach to a 6mm D-shaft or gear motor using a setscrew. These gears have 20 teeth with a gear pitch of 32P, an outer diameter of...

SF-ROB-12111

Pillow block bearing mounts attach to the outside of a channel and can be used as simple hinges. These bearing mounts have a width of 1.32”, a thic...

SF-ROB-12110

These are M3 hex head cap screw, which provides a more secure way to install circuit boards, sensors and mechanical mounting. SPECIFICATIONS Screw...

DF-FIT0270

Overview The Light-Duty (LD) series of Glideforce linear actuators by Concentric International (formerly Iowa Export-Import) are 12V DC gearmo...

PL-2308

These hub-mountable aluminum pulleys can be used to drive wheels or other pulleys with ¼” or ⅛” belts. They have an outer diameter of 2.125”, a bor...

SF-ROB-12109

These are M3 hex head cap screw, which provides a more secure way to install circuit boards, sensors and mechanical mounting. SPECIFICATIO...

DF-FIT0294

Set screw hubs offer a cheap way to attach hub mount gears or wheels to a shaft. The hub offers 4 equally spaced 6-32 tapped holes utilizing the 0....

SF-ROB-12108

These clear yellow precision disk wheels have an outer diameter of 4”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are...

SF-ROB-12107

Overview The Light-Duty (LD) series of Glideforce linear actuators by Concentric International (formerly Iowa Export-Import) are 12V DC gearmo...

PL-2307

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows t...

SF-ROB-12106

These enclosures allow you to mount your micro gearmotor to other Actobotics products easily. Once your gearmotor is inserted, you can take advanta...

SF-ROB-12105

These are M3 hex head cap screw, which provides a more secure way to install circuit boards, sensors and mechanical mounting. SPECIFICATIONS   ...

DF-FIT0273

Overview The Light-Duty (LD) series of Glideforce linear actuators by Concentric International (formerly Iowa Export-Import) are 12V DC gearmo...

PL-2306

RoMeo V2 [R3] is an All-in-One Arduino based robot board, it is especially designed for robotics applications, and extended devices. Romeo benef...

DF-DFR0225

These set screw hubs make it capable to connect a micro gearmotor with a 3mm bore to a precision disk wheel or other object with a 0.77" hub patter...

SF-ROB-12104

These hub mount 90 degree angle brackets mate directly to Actobotics channels and hub mounts and are useful as attachment points. They share the sa...

SF-ROB-12103

Overview The Light-Duty (LD) series of Glideforce linear actuators by Concentric International (formerly Iowa Export-Import) are 12V DC gearmo...

PL-2305

These are M3 hex head cap screw, which provides a more secure way to install circuit boards, sensors and mechanical mounting. SPECIFICATIO...

DF-FIT0280

These 90 degree hub mounts mate directly to Actobotics channels in multiple positions and are useful as attachment points for shafts and tubes with...

SF-ROB-12102

Overview The jrk 21v3 is a versatile, general-purpose motor controller that supports a variety of interfaces, including USB. The broad operating...

PL-1394

These 8" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating ...

SF-ROB-12101

These are M3 hex head cap screw, which provides a more secure way to install circuit boards, sensors and mechanical mounting. SPECIFICATION   ...

DF-FIT0274

Not recommended for new designs: We strongly recommend our newer and better (and smaller) Jrk G2 18v19 and Jrk G2 24v13 USB motor controllers with...

PL-1393

Overview The Light-Duty (LD) series of Glideforce linear actuators by Concentric International (formerly Iowa Export-Import) are 12V DC gearmo...

PL-2304

Pillow block bearing mounts attach to the outside of a channel and can be used as simple hinges. These bearing mounts have a width of 1.32”, a thic...

SF-ROB-12100

These are M3 hex head cap screw, which provides a more secure way to install circuit boards, sensors and mechanical mounting. SPECIFICATIONS   ...

DF-FIT0269