Robotics in New Products

These plastic shaft spacers have an inner diameter of 5/8” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bear...

SF-ROB-12269

The Tamiya 72008 4-Speed Worm Gearbox kit includes one brushed DC motor and all the gears and parts to build any of the four possible gear ratio c...

PL-2391

These 6" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating ...

SF-ROB-12268

These round pillow block bearing mounts attach to the outside of a channel and have a ball bearing with a 1” bore for shafts and tubes. These beari...

SF-ROB-12267

These channel brackets (C type) provide you with an attachment point for a channel mountable gearbox kit. They share the same 0.5" center hole and ...

SF-ROB-12266

These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears have 64 teeth with a ge...

SF-ROB-12265

These clamping hubs are a great and cost-effective choice when attaching hub mount gears or wheels to shafts or tubes and can be a better option th...

SF-ROB-12264

The Tamiya 70170 Remote Control Construction Set includes all the Tamiya parts necessary to make your own tracked chassis. Assemble the crawler w...

PL-2389

These 1" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a...

SF-ROB-12263

These standard gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anything else that needs to ...

SF-ROB-12262

The Tamiya 70162 Remote Control Construction Set includes all the Tamiya parts necessary to make your own wheeled chassis. Attach either an arm, ...

PL-2388

These flat bearing mounts attach to the face of a channel or plate and have a ball bearing with a 3/8” bore for shafts. They can be used in conjunc...

SF-ROB-12260

These 1" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a...

SF-ROB-12259

These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 12 teeth with a g...

SF-ROB-12258

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-2386

These 4" long stainless steel shafts have a diameter of 5/16". These shafts are solid, which makes them an ideal choice for axles. These shafts hav...

SF-ROB-12257

These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears have 76 teeth with a ge...

SF-ROB-12256

These 10" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". When used with the matin...

SF-ROB-12254

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-2385

These 12" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06". When used with the ma...

SF-ROB-12253

These side mount brackets can function as mounts for endcaps for Actobotics channels. They have two untapped holes spaced 0.44" apart perpendicular...

SF-ROB-12252

These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts, or...

SF-ROB-12251

These aluminum channels are the building blocks to the Actobotics line and function as the back bone to your electromechanical project. These chann...

SF-ROB-12250

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-2384

These 90° clamping hubs provide a great way to attach a 5/8” diameter tube or shaft to a ½" diameter hub. These clamping hubs have a 5/8" diameter ...

SF-ROB-12249

The SparkFun moto:bit is a fully loaded “carrier” board for the micro:bit that, when combined with the micro:bit, provides you with a fully functio...

SF-DEV-14213

These pinion gears attach to a 6mm D-shaft or gear motor using a setscrew. These gears have 16 teeth with a gear pitch of 32P, an outer diameter of...

SF-ROB-12248

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-2383

These ball bearing hubs from Actobotics are great when you need to securely fasten a free-spinning shaft to a stationary channel to drive a pulley,...

SF-ROB-12245

Bipolar stepper motor wires are terminated with bare leads. Bipolar stepper motor wiring diagram. Overview This high-torque hybrid bipola...

PL-1478

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-2382

These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts, or...

SF-ROB-12244