Robotics in New Products

Pololu 40×7mm wheels. Motor Connections These wheels are designed to press-fit securely onto the 3mm D output shafts on many of our gearmoto...

PL-1454

These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears have 84 teeth with a ge...

SF-ROB-12206

These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 150:1 and operate up to 12 volts and have a sta...

SF-ROB-12205

Pololu 40×7mm wheels. Motor Connections These wheels are designed to press-fit securely onto the 3mm D output shafts on many of our gearmoto...

PL-1453

These clear precision disk wheels have an outer diameter of 4”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal ...

SF-ROB-12204

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-2367

Pololu 40×7mm wheels. Motor Connections These wheels are designed to press-fit securely onto the 3mm D output shafts on many of our gearmotors...

PL-1452

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows t...

SF-ROB-12202

Description: These are standard nuts with 2-56 thread. For use with 2-56 machine screws and five button pad set listed below. Sold in single units.

SF-PRT-08995

These black precision disk wheels have an outer diameter of 3”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal ...

SF-ROB-12201

Overview VNH5019 motor driver carrier, bottom view with dimensions. This module is a compact breakout board for ST’s high-power VNH5019 moto...

PL-1451

These are standard screws with 2-56 thread and 3/8" long, recommended for the small button pad sets. Can be used with a 2-56 nut. Sold in single ...

SF-PRT-08993

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-2366

This servo plate provides a mounting ring for your ¼-sscale servo. Four 6-32 tapped holes hold the servo in place, while 12 holes surrounding the p...

SF-ROB-12200

This hub adapter lets you connect Actobotics parts with a 0.77" hub pattern to parts with a 1.5" hub pattern. The holes for the 1.5" pattern altern...

SF-ROB-12199

New versions available! We have replaced these older short-shaft versions of our 20D mm gearmotors with a much wider assortment of gear ratios th...

PL-1450

These aluminum beams are great for making unique links and connections in your Actobotics project thanks to 17 through-holes running its length and...

SF-ROB-12198

We use this motor driver in our VNH5019 motor driver carrier and our dual VNH5019 motor driver shield for Arduino. We also carry boards based on ...

PL-1449

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-2365

These 12" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tu...

SF-ROB-12197

Set screw hubs offer a cheap way to attach hub mount gears or wheels to a shaft. The hub offers 4 equally spaced 6-32 tapped holes utilizing the 0....

SF-ROB-12196

Overview Discontinuation notice: These gearmotors have been replaced by functionally identical versions with plastic end caps over the encoders (t...

PL-1447

These clear precision disk wheels have an outer diameter of 2”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal ...

SF-ROB-12195

This crossover plate attaches to other Actobotics products and makes attaching to 1" tubing easy. The inner section has a 1.5" hub pattern and has ...

SF-ROB-12194

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-2364

Overview Discontinuation notice: These gearmotors have been replaced by functionally identical versions with plastic end caps over the encoders (t...

PL-1446

This motor mount connects to other Actobotics products with a swivel mount, allowing you to easily attach your motor to gears or pulleys. A set scr...

SF-ROB-12192

These zinc-plated socket head machine screws are 1-3/8"” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/...

SF-ROB-12191

The MOTORplate from Pi-Plates brings a suite of professional motion control features to your Raspberry Pi. These plates can each control a combinat...

SF-DEV-14149

These 7" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a...

SF-ROB-12189

Overview Discontinuation notice: These gearmotors have been replaced by functionally identical versions with plastic end caps over the encoders (t...

PL-1445

These 45 degree hub mounts mate directly to Actobotics channels in multiple positions and are useful as attachment points for shafts and tubes with...

SF-ROB-12188

This ball caster kit from Pololu includes a black ABS housing, a 3/8" diameter metal ball, two spacers (1/16" and 1/8" thick), and two #2 screw set...

SF-ROB-08909