Robotics in New Products

The "Wild Thumper" 6WD All Terrain Chassis (Black, 34:1) is made from 2mm thick anodized aluminum plate with stainless steel and nickel plated b...

DF-ROB0030

These blue precision disk wheels have an outer diameter of 4”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal f...

SF-ROB-12447

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows t...

SF-ROB-12446

This version of our A4988 Stepper Motor Driver Carrier ships with 0.1″-pitch male header pins installed as shown in the main product picture, so n...

PL-2980

These wheel adaptors allow you to adapt 17mm hex drive wheels to our .770” hub pattern. The recessed .770” pattern allows you to run 6-32 socket he...

SF-ROB-12445

This is a bulk-packaged version of our DRV8825 Stepper Motor Driver carrier that ships without header pins; we carry compatible 0.1″-pitch 40-pin ...

PL-2977

These hubs are ideal for attaching wheels, gears, or any heavy duty servo horns directly to your C1 Hitec servo spline. These aluminum servo hubs h...

SF-ROB-12443

This is a bulk-packaged version of our Black Edition A4988 Stepper Motor Driver carrier that ships without header pins; we carry compatible 0.1″-p...

PL-2976

These plastic shaft spacers have an inner diameter of 3/8” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bear...

SF-ROB-12441

This product has retired since Nov 26th, 2015. This is a Arduino-compatible autopilot board designed by Chris Anderson and Jordi Muñoz of DI...

DF-DFR0044

These servo gears are made specifically to fit a Futaba 3F servo spline, allowing you to mate other gears to your servo. They have 16 teeth with a ...

SF-ROB-12440

In most Arduino projects, relays are the first choice to drive some large current device. It requires a certain amount of current to drive the int...

DF-DFR0457

These 2" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts hav...

SF-ROB-12439

The HS-422 has been around for a while and for a good reason, durability and the ability to be easily modified. For inexpensive robotic applicat...

DF-SER0002

This is a bulk-packaged version of our A4988 Stepper Motor Driver carrier that ships without header pins; we carry compatible 0.1″-pitch 40-pin ma...

PL-2975

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows t...

SF-ROB-12438

These heavy duty wheels have a diameter of 6” and a width of 1”. They have a hard inner plastic core and a smooth outer rubber tire. These wheels u...

SF-ROB-12437

The Lynxmotion Johnny 5 Robot Kit is a very cool and completely functional model of the ever popular movie robot. The robot kit is available as ...

DF-ROB0010

This is a great first stepper motor, good for small projects and experimenting with steppers. This uni-polar motor has a built in mounting plate wi...

AF-858

DRV8880 stepper motor driver carrier with dimensions. Overview This product is a carrier board or breakout board for TI’s DRV8880 stepper mo...

PL-2971

Note: This product is discontinued. BRAT stands for Bipedal Robotic Articulating Transport. This Biped robot kit is a 6 servo biped walker fe...

DF-ROB0023

These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts, or...

SF-ROB-12436

These red precision disk wheels have an outer diameter of 5”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal fo...

SF-ROB-12435

These quad hub mounts can attach to the end or the middle of Actobotics channels to provide you a 90 degree angle with additional attachment points...

SF-ROB-12433

This DF05BB Pan and Tilt assembly for horizontal surface mount. Made using two DFRobot servo brackets. Perfect for your small remote piloted robot...

DF-FIT0045

AMIS-30543 stepper motor driver carrier, bottom view with dimensions. Overview This product is a carrier board or breakout board for ON Semi...

PL-2970

These 5" long stainless steel shafts have a diameter of 3/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have...

SF-ROB-12432

This screw plate gives you the ability to attach a ¼-20 machine screw to Actobotics channels. It has 8 6-32 tapped holes around the edge, and a ¼-2...

SF-ROB-12431

These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears have 76 teeth with a ge...

SF-ROB-12430

Introducing the Gravity Digital Relay Module - the latest addition to DFRobot's Gravity series! This module is a little different to the other rel...

DF-DFR0473

These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 50:1 and operate up to 12 volts and have a stal...

SF-ROB-12429

These 4" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have...

SF-ROB-12428

These 6" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a...

SF-ROB-12427

Overview MAX14870 Single Brushed DC Motor Driver Carrier, bottom view with dimensions. The MAX14870 from Maxim Integrated is a tiny H-bridge m...

PL-2961

These blue “skate” wheels have an outer diameter of 2.975”, an inner diameter of 0.87”, and a width of 0.94”. When used in conjunction with the ska...

SF-ROB-12426

These blue precision disk wheels have an outer diameter of 2”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal f...

SF-ROB-12425

These aluminum beams are great for making unique links and connections in your Actobotics project thanks to 9 through-holes running its length and ...

SF-ROB-12424

Overview BD65496MUV Single Brushed DC Motor Driver Carrier, bottom view with dimensions. The BD65496MUV from ROHM is a tiny H-bridge motor d...

PL-2960

These zinc-plated socket head machine screws are 3/8” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/64"...

SF-ROB-12423

These orange precision disk wheels have an outer diameter of 5”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal...

SF-ROB-12422

These ½" bore hub spacers allow you to space your sprocket, gear, wheel, or other attachment from the mating hub. These hubs utilize the 0.77" hole...

SF-ROB-12421

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows t...

SF-ROB-12420

These 8" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". When used with the mating...

SF-ROB-12419

These pinion gears attach to a 6mm D-shaft or gear motor using a setscrew. These gears have 24 teeth with a gear pitch of 32P, an outer diameter of...

SF-ROB-12418

These 5" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when u...

SF-ROB-12416

These zinc-plated socket head machine screws are 1/2” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/64"...

SF-ROB-12415

INTRODUCTION The TowerPro SG90C is a 360 degree micro servo. It uses a plastic gear drive and is light and compact. It can b...

DF-SER0043