Robotics in New Products

These 9" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have...

SF-ROB-12544

These lightweight servo hubs are ideal for attaching wheels, gears, or any heavy duty servo horns directly to your C1 Hitec servo spline. These alu...

SF-ROB-12543

The primary feature of the Tamiya 72004 Worm Gearbox from Tamiya’s high-efficiency series is a worm gear, which locks the output shaft whenever th...

PL-73

These 5" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a...

SF-ROB-12542

This is a metal DC geared motor, 20:1 metal reducer. It has a small size and large torque. The maximum torque could arrive 0.7 kg.cm. It is stab...

DF-FIT0495-I

Pillow block bearing mounts attach to the outside of a channel and can be used as simple hinges. These bearing mounts have a width of 1.32”, a thic...

SF-ROB-12541

The Tamiya 72003 high-power gearbox can be built in a gear ratio of 41.7:1 or 64.8:1, making it well-suited for most vehicles that require a balan...

PL-72

This is a metal DC geared motor, 99:1 metal reducer. It has a small size and large torque. The maximum torque could arrive 2.5 kg.cm. It is stab...

DF-FIT0495-E

These 2.375" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, wh...

SF-ROB-12540

These clear pink precision disk wheels have an outer diameter of 4”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are i...

SF-ROB-12539

This is a metal DC geared motor, 362:1 metal reducer. It has a small size and large torque. The maximum torque could arrive 7.5 kg.cm. It is sta...

DF-FIT0495-B

These 6" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tub...

SF-ROB-12538

The Tamiya 72002 high-speed gearbox can be assembled in 11.6:1 and 18:1 gear ratios. The high-efficiency gearbox is therefore suited for very fas...

PL-71

This is a metal DC geared motor, 478:1 metal reducer. It has a small size and large torque. The maximum torque could arrive 10 kg.cm. It is stab...

DF-FIT0495-A

These black precision disk wheels have an outer diameter of 2”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal ...

SF-ROB-12537

These 7" long stainless steel shafts have a diameter of 3/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have...

SF-ROB-12536

Tamiya 72001 planetary gearbox dimensions (in mm). The first in Tamiya’s “high efficiency” series, the planetary gearbox features two 4:1 an...

PL-70

These 1.0" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when...

SF-ROB-12535

These skate wheel adapters have a diameter of 1”, a width of 0.32”, and utilize the 0.77” hub pattern. These adapters allow you to attach the 2.975...

SF-ROB-12534

Tamiya 70103 Universal Gearbox Kit dimensions in mm. Tamiya 70103 universal gearbox has a thin, compact, metal frame, making it the smallest...

PL-69

These side mount brackets can function as mounts for encaps for Actobotics channels. They have two 6-32 tapped holes spaced 0.544" apart perpendicu...

SF-ROB-12533

These standard gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anything else that needs to ...

SF-ROB-12532

Overview The Tamiya 4-speed crank-axle gearbox has four possible gear ratios, including the highest gear ratio of Tamiya’s gearbox series, 5402:1,...

PL-68

INTRODUCTION This is a miniature stepper motor with 100:1 metal reduction gear box for enhanced torque. It has a voltage...

DF-FIT0503

These aluminum attachment blocks make it possible to connect two flat panels at a 90° angle. These blocks come in packs of 12 and each offers two 6...

SF-ROB-12531

These orange precision disk wheels have an outer diameter of 2”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal...

SF-ROB-12530

Overview The Tamiya 3-speed crank-axle gearbox is essentially half of the twin-motor gearbox. The kit comes with enough parts so you can built th...

PL-67

These pinion gears attach to a ¼” D-shaft or gear motor using a setscrew. They have 20 teeth with a gear pitch of 32P, an outer diameter of 0.688”,...

SF-ROB-12529

These zinc-plated socket head machine screws are 1"” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/64" ...

SF-ROB-12528

These 9" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a...

SF-ROB-12527

The Tamiya 70144 ball caster from Tamiya’s educational construction series is a small steel ball that rests on metal rollers inside a plastic hous...

PL-66

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows t...

SF-ROB-12526

These zinc-plated socket head machine screws are 5/16” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/64...

SF-ROB-12525

The Tamiya 70101 truck tire set includes the following: Four wheels: 36 mm diameter, 16 mm wide Two hubs for use with 3 mm hex shafts One 3 m...

PL-65

This motor mount connects to other Actobotics products with a swivel mount, allowing you to easily attach your motor to gears or pulleys. A set scr...

SF-ROB-12524

The Tamiya 70096 off-road tires set includes the following: Two wheels: 50 mm diameter, 30 mm wide Two hubs for use with 3 mm hex shafts One ...

PL-64