Robotics in New Products

These hub-mountable aluminum pulleys can be used to drive wheels or other pulleys with ¼” or ⅛” belts. They have an outer diameter of 1.125”, a bor...

SF-ROB-12523

The Tamiya 70111 sports tire set includes the following: Two wheels: 56 mm diameter, 25 mm wide Two hubs for use with round 4 mm shafts Two h...

PL-62

These hub-mountable aluminum sprockets can be used to drive wheels or other sprockets with 0.25” chain. They have 40 teeth with a spacing of 0.25”,...

SF-ROB-12522

These 12" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". When used with the matin...

SF-ROB-12521

Tank-style chassis built using the Tamiya 70100 track and wheel set, Tamiya 70098 universal plate set, and Tamiya 70097 twin-motor gearbox ki...

PL-61

INTRODUCTION This is an ultra small size DC motor driver for room limited projects, while the impressive IC - LM2575 cou...

DF-DRI0042

These 2" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tub...

SF-ROB-12520

These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 10:1 and operate up to 12 volts and have a stal...

SF-ROB-12518

These zinc-plated socket head machine screws are 1/4” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/64"...

SF-ROB-12517

These white precision disk wheels have an outer diameter of 3”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal ...

SF-ROB-12516

These 8" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a...

SF-ROB-12515

INTRODUCTION The latest quad motor driver shield for Arduino, compatible with 5V/3.3V Arduino controller, can control up...

DF-DRI0039

These clamping hubs are a great and cost-effective choice when attaching hub mount gears or wheels to shafts or tubes and can be a better option th...

SF-ROB-12513

Set screw hubs offer a cheap way to attach hub mount gears or wheels to a shaft. The hub offers 4 equally spaced 6-32 tapped holes utilizing the 0....

SF-ROB-12512

This is a 4.8-46V, 2A Dual Motor Controller which is the revised version of the DF-MDV1.0. Its performance has been improved greatly. It can bear ...

DF-DRI0002

Quad block bearing mounts attach to the inside of a channel and have a ball bearing with a 1/4” bore for shafts. These bearing mounts have a width ...

SF-ROB-12510

The swivel hub lets you connect any two parts with the 0.77" hub pattern together and have them swivel a full 360 degrees. Internal ball bearings a...

SF-ROB-12509

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows t...

SF-ROB-12508

This is a metal DC geared motor, 34:1 metal reducer. It has a small size and large torque. The maximum torque could arrive 1 kg.cm. It is stable...

DF-FIT0495-H

You want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of...

AF-815

These white precision disk wheels have an outer diameter of 5”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal ...

SF-ROB-12507

This is a 12V normally closed solenoid valve with no polarity distinction. It is normally closed until powered on. You can implement real-time w...

DF-FIT0498

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows t...

SF-ROB-12506

Three rows in a right angle header!? Yes! These chunks of 0.1" header has yet-another-row - handy for when you want to connect cables that come in ...

AF-816

These flat dual channel brackets mate directly to Actobotics channels and hub mounts and are useful as attachment points. They share the same 0.5" ...

SF-ROB-12505

The 2WD Mobile Robot Platform for Arduino is a small, low-cost mobile platform for use with a standard Arduino microcontroller. The robot comes as...

DF-ROB0005

These dual channel 45 degree angle brackets mate directly to Actobotics channels and hub mounts and are useful as attachment points. They share the...

SF-ROB-12504

Arduino product family is a great learning platform for electronics, programming and robotics. But most projects at some point require mobility. T...

DF-DRI0009

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows t...

SF-ROB-12503

This is a DFRobot designed silicone wheel comes with high quality ABS material wheel hub and silicone wheel tire. To build your own robot, a p...

DF-FIT0500

These flat bearing mounts attach to the face of a channel or plate and have a ball bearing with a 1/2” bore for shafts. They can be used in conjunc...

SF-ROB-12502

This is an ultra small Dual DC motor driver for some room limited projects. UVLO (Under Voltage Latch-Out) features a safe guard for your system...

DF-DRI0041

This mounting bracket is designed for Sharp GP2D12/2D15/Sharp GP2Y0A02YK IR ranger sensor. You can buy this item using 250 reward points. Specifi...

DF-FIT0005

These couplers allow you to connect a 1/4” shaft directly to your C1 Hitec servo spline. The set screw included with each shaft coupler works well ...

SF-ROB-12501