Sensors in New Products

Clearance: This board is being replaced by the AltIMU-10 v5, which features newer sensor ICs (the LIS3MDL 3-axis magnetometer, the LSM6DS33 3-axis...

PL-2469

DFRobot is very proud to release this first 802 b/g/n wifi shield in the Arduino market. The arduino shield uses WizFi210 which is a low power-...

DF-TEL0047

Discontinuation notice: This board has been replaced by the MinIMU-9 v5, which features newer sensor ICs (the LIS3MDL 3-axis magnetometer and the ...

PL-2468

Bosch has stepped up their game with their new BMP280 sensor, an environmental sensor with temperature, barometric pressure that is the next genera...

AF-2651

Overview Sharp’s distance sensors are a popular choice for many projects that require accurate distance measurements. This particular sensor ...

PL-2467

Overview These small and responsive sensors from Sharp are great way to quickly detect the presence of nearby objects. The available versions...

PL-2466

Overview These sensors are a great way to quickly detect the presence of nearby objects. It consists of a Sharp GP2Y0D805, GP2Y0D810, or GP2...

PL-2465

A low power version of the USB-RLY16 module, the USB-RLY16L is powered solely from the USB bus and provides eight volt free contact relay output...

DF-DFR0173

Overview The Sharp distance sensors are a popular choice for many projects that require accurate distance measurements. This IR sensor is more e...

PL-2464

Overview The Vishay TSSP58P38 looks like typical modulated IR receiver modules but is actually unique: it has an automatic gain control (AGC) that...

PL-2463

Overview Unlike typical IR receiver modules that automatically vary their gain for optimal communication, the Vishay TSSP58038 modulated IR receiv...

PL-2462

This breakout board uses the LTC3588 Piezoelectric Energy Harvester from Linear Technologies. This board can be used not only for harvesting pie...

DF-SEN0105

Note: The QTR-1RC reflectance sensor requires a digital I/O line to take readings. The similar QTR-1A reflectance sensor is available with an an...

PL-2459

This is an edge detection sensor from DFRobot. It will help your robot detect the edge of a precipice, preventing it from falling off a table or...

DF-SEN0042

You might know RFID as the technology that Big Brother uses to track your every move. Quickly, don the tinfoil hats!! Only kidding. RFID is useful...

SF-COM-14325

Note: The QTR-1A reflectance sensor requires an analog input to take readings. The similar QTR-1RC reflectance sensor is available with a digita...

PL-2458

The QTR-3RC reflectance sensor array requires digital I/O lines to take readings. The similar QTR-3A reflectance sensor array is available with an...

PL-2457

Sparkle is Aniomagic's avant-garde way to make interactive textiles, paper, ceramics, and environments. These lightboards come in packs of five ...

DF-DFR0169

The QTR-3A reflectance sensor array requires analog inputs to take readings. The similar QTR-3RC reflectance sensor array is available with digita...

PL-2456

Sabertooth 2X5 is the motor driver of choice for small differential-drive robots. It is ideal for smaller robots- up to 3lbs in combat or 25 lbs...

DF-DRI0012

This is a waterproof DC-DC converter. With 8-18V DC input, it converts to 24V@10A which is an ideal supply for robots. FEATURES ...

DF-FIT0172

Note: The QTR-L-1RC reflectance sensor requires a digital I/O line to take readings. The similar QTR-L-1A reflectance sensor is available with a...

PL-2455

This is a waterproof DC-DC converter. With 8-40V DC input, it converts to 24V@6A which is an ideal supply for mobile robots, and motors. ...

DF-FIT0171

This is a waterproof DC-DC converter. With 12-40V DC input, it converts to 12V@10A which is an ideal supply for embedded PC and robots. ...

DF-FIT0170

This is a waterproof DC-DC converter. With 16-36V DC input, it converts to 9V@5A which is a good supply for robots. FEATURES ...

DF-FIT0169

Overview This current sensor is a carrier board or breakout board for Allegro’s ACS711KEXLT-31AB-T Hall effect-based linear current sensor wi...

PL-2453

This is a waterproof DC-DC converter. With 12V/24V (11-35V) DC input, it converts to 7.5V@5A which is an ideal supply for robots. FE...

DF-FIT0168

Overview This current sensor is a carrier board or breakout board for Allegro’s ACS711KEXLT-15AB-T Hall effect-based linear current sensor wi...

PL-2452

This is a new version of the FTDI breakout board features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Ardui...

DF-DFR0164

The XBee USB Adapter V2 is an update version from DFRobot. It features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found o...

DF-DFR0174

Overview The Sharp distance sensors are a popular choice for many projects that require accurate distance measurements. This IR sensor is more ec...

PL-2450

This is a 20x4 Arduino compatible LCD display module with high speed I2C interface. It is able to display 20x4 characters on two lines, white cha...

DF-DFR0154

This is a new IIC LCD backpack which supports Gadgeteer interface (IDC10). It allows gadgeteer user to play with LCD160X. The IIC LCD Backpa...

DF-DFR0175

This is a cool touch sensor from DFRobot. You can hook it up to the IO Expansion shield (for arduino) directly. It includes a metallic tape with...

DF-SEN0104