New Products

These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of l...

AF-5491

These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of l...

AF-5490

These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of l...

AF-5489

These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of l...

AF-5488

These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of l...

AF-5487

Micro:bit Power Supply Module 3.3V 2A is a kind of power module for micro:bit. The output voltage of 3.3v can be connected directly to the battery ...

LB-IBIS

A hackable, programmable badge with 2.4" (320 x 240) TFT LCD colour display, powered by Raspberry Pi RP2040. We've had a lot of requests for a LCD...

PR-PIM636

The Raspberry Pi Pico W builds upon the great cost-for-performance metrics of the Pico and add WiFi to the board. The Pico W features the same att...

RP-SC0918

The Raspberry Pi 48W (8V DC, 6A) power supply is designed for use with the Raspberry Pi Build HAT. Input 110 to 240V ACOutput8V DC, 6ACable 1.5M, 1...

RP-SC0749

The Raspberry Pi 400 with Pico Kit for Australia includes:  Raspberry Pi 400 (Australian Keyboard Layout) Raspberry Pi Mouse microSD Card with Ra...

LB-PI400-PICO

I/O Expansion board designed for Raspberry Pi 400 to expand its utilization via the two dedicated GPIO ports for Raspberry Pi HAT.  It works as a G...

SB-21307

The rings are 'chainable' - connect the output pin of one to the input pin of another. Use only one microcontroller pin to control as many as you c...

LB-LS2225-R-24

A soft lanyard featuring the Pimoroni logo and a ton of colourful components. You could use them for dangling whatever you like! Features Metal ...

PR-PIM599

Pico 3V Relay HAT is a Two-Channel high-quality relay with the Switching Voltage(VAC) up to 2A/ 120V(Max), Switching Voltage(VDC) up to 2A/ 24V(Ma...

SB-PICO-RELAY

PiCube is a 4x4x4 LED cube HAT for Raspberry Pi with 5V DC operating voltage. PiCube, a monochromatic( Red, Blue, Green) LED with 64, is the lates...

SB-PICUBE-RED

Raspberry Pi 400 GPIO Adapter is a new I/O expansion kit technological device built with 2 x 20 pins headers designed for Raspberry Pi 400. SB Com...

SB-21239

1.47inch LCD Display Module, Rounded Corners, 172×320 Resolution, SPI Interface1.47inch LCD Display Module Embedded ST7789V3 Driver, Using SPI Bus ...

WS-22224

Description: New dual-purpose aluminum alloy card reader Has Type-c standard USB2.0 interface, suitable for mobile phones, tablet PCs and computer...

LB-USB-SD

Raspberry Pi Pico WiFi HAT is a compact and easy-to-use WiFi HAT for the Raspberry Pi Pico that includes an ESP8266 module, IEEE 802.11b/g/n WiFi ...

SB-PICOWIFIHAT

Pico 1.28” Round LCD HAT is a 1.28-inch display HAT with 240 x 240 resolution, 65K RGB colors, clear and colorful displaying effect, and a joystic...

SB-128ROUND

FS-600 is a small height radiation detector. Its main function is to monitor X-ray, ♥-ray and ⑤-ray. The detector of this instrument is an energy c...

LB-RADI

New technology hot sale 4K solar powered camo video hunting trail wildlife outdoor cameraproduct Name   | RD7000WFPhoto resolution  | 30M;(7392x416...

LB-OUTCAMERA

The night vision monocular can be used in complete darkness or low light situation. It achieves 5X optical zoom and 8X digital zoom. It is a perfec...

LB-NIGHTSCOPE

DF-SEN0521

The 1.54inch lcd work with Raspberry Pi zero/zero 2/3B/4B/CM4, Support Raspbian and Retropie Operating voltage: 3.3V Interface: SPI  LCD type: TFT ...

LB-PLCD154

HRB8825 Stepper Motor HAT For Raspberry Pi, Drives Two Stepper Motors, Up To 1/32 MicrosteppingStepper Motor HAT (B) Alternative Solution Of Steppe...

WS-22311

SX1262 LoRa Node Module For Pico LoRaWAN Protocol Support Features At A Glance The Pico-LoRa-SX1262-XXXM is LoRa node expansion module designed fo...

WS-21667

A svelte 2.9" (296x128px) mono E Ink® display for Raspberry Pi Pico / Pico W. Pico Inky Pack features the speedy 2.9" e-paper display that you can...

PR-PIM634

A fully featured environmental monitoring / citizen science add-on for Raspberry Pi Pico and Pico W. It has a built-in colour 1.54" LCD screen and...

PR-PIM635

MIKROE Weather Click carries BME280 integrated environmental unit from Bosch. It’s a sensor that detects humidity, pressure, and temperature, speci...

SF-SEN-18823

MIKROE Weather Click carries BME280 integrated environmental unit from Bosch. It’s a sensor that detects humidity, pressure, and temperature, speci...

SF-SEN-18823

Passive cooling aluminum case for Raspberry Pi Zero W and Raspberry Pi Zero 2W boards! This beautiful black anodized aluminum case features a heats...

LB-PT22033-R

One input: DC 6V - 12V (input voltage to the output voltage must be higher than 1V.) Output: 3.3V (+ - 0.05v error), 5.0V (+ - 0.05v error), 800mA ...

LB-LR0214-142A

Passive cooling aluminum case for Raspberry Pi Zero W and Raspberry Pi Zero 2W boards! This beautiful black anodized aluminum case features a heats...

LB-PT22033-S

Note - this is the White, Basic Version and does not include a Raspberry Pi 4CrowPi L is a lite version born out of CrowPi2, and "L" stands for Lit...

EC-SER35001L

This gearmotor consists of a low-power, 6 V brushed DC motor combined with a 377.93:1 metal spur gearbox. The gearmotor is cylindrical, with a diam...

PL-1590

The Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. It feature the RP2040 which marks Ra...

RP-SC0917

A sophisticated distance sensor with 8x8 multizone ranging and a wide field of view - great for robots and advanced motion sensing. This sensor m...

PR-PIM622

This neat little add-on board lets you drive two micro metal gearmotors from a Raspberry Pi Pico - tiny robots ahoy! Solder this SHIM to the back o...

PR-PIM617

A range of compact, convenient USB-C LiPo/LiIon battery chargers, perfect for feeding hungry batteries. We've spent quite a lot of time at Pirate ...

PR-PIM612

Note: micro:bit board and batteries are not included. What’s new in Maqueen Plus V2? 1. This is the 18650 battery version 2. New plastic box with...

DF-MBT0021-EN-18650

This compact breakout board for TI’s DRV8874 motor driver offers a wide operating voltage range of 4.5 V to 37  and can deliver a continuous 2.1 A ...

PL-4035

The Motoron M3H256 Triple Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. Eac...

PL-5035

The Motoron M3H256 Triple Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. Eac...

PL-5033