New Products

This is a pretty straight-forward HAT for bringing simple cluster computing to the Raspberry Pi A+ and B+ lines. The Cluster HAT from 8086 allows f...

SF-DEV-18155

This is a small 1/4 wave rubber duck antenna for (European band) LoRa or other 868MHz communication. Antenna has a center frequency of 868MHz and u...

SF-WRL-18082

Increase your range with this 1/2 wave duck antenna for the European LoRa band. Designed for 810-910 MHz (868MHz center frequency) it is ideal for ...

SF-WRL-18083

The SparkFun Qwiic Haptic Driver includes an itty-bitty, Linear Resonant Actuator (LRA) vibration motor and Dialog Semiconductor's DA7280 motor dri...

SF-ROB-17590

The Qwiic Haptic Motor Driver Kit includes an itty-bitty, Linear Resonant Actuator (LRA) vibration motor, wires, and the breakout board for Dialog ...

SF-ROB-18247

The AS7341 is an 11-channel spectral sensor from AMS that covers wavelengths between 350nm to 1000nm. It features eight channels that span the visi...

SF-SPX-17719

The SparkFun 1-Channel LoRa Gateway is a powerful 3-network capable device thanks to an onboard ESP32 WROOM module and an RFM95W LoRa modem. The RF...

SF-WRL-18074

This is a basic 16 character by two line display with a snazzy black background with white characters. This LCD utilizes the extremely common HD447...

SF-LCD-18160

Need a power sensor that can sense voltage up to 60VDC and current up to 30A? This is the product for you!The Allegro MicroSystems ACS37800 power m...

SF-SPX-17873

The TMF8801 is a tiny, easy to use, time-of-flight sensor for measuring distances up to 2.5m. It uses a Class 1 IR VCSEL for excellent performance ...

SF-SPX-17716

The SDP31 differential pressure sensor is ideally suited to air flow rate and air speed measurement. Need an air speed indicator for your drone / m...

SF-SPX-17874

The LIDAR-Lite v4 Qwiic from GARMIN is a high-performance, wireless optical distance measurement sensor that doesn't require any soldering to get s...

SF-SEN-18009

The GD25Q40C (4M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the Dual/Quad SPI: Serial Clock, Chip Sele...

SF-COM-18076

We have all been spending a lot of time at home this past year! We have all been staring at the walls, looking at the pile of dishes and wondering ...

SF-KIT-18157

The IQaudio Codec Zero is a Raspberry Pi Zero-sized audio I/O HAT. It delivers bi-directional digital audio signals (I2S) between Raspberry Pi Zero...

SF-DEV-17740

In this kit, you'll build an open source communication device - a "conversation machine." Once your kit is complete, you'll be able to make pattern...

SF-CUST-18089

The SparkFun QwiicBus MidPoint works in tandem with the QwiicBus Endpoint so you can extend the range of your I2C bus and easily tap into it to dro...

SF-COM-18000

The SparkFun QwiicBus EndPoint is the fastest and easiest way to extend the range of your I2C communication bus. The breakout uses NXP’s PCA9615 IC...

SF-COM-16988

The SparkFun QwiicBus Kit comes with everything you need to get started with the SparkFun QwiicBus system in one handy package. The kit includes tw...

SF-KIT-17250

Qwiic is a very efficient way to quickly prototype an idea but not all Qwiic-enabled devices have two ports. The SparkFun Qwiic MultiPort adds addi...

SF-BOB-18012

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other....

SF-PRT-17912

The Soft Power Switch is a passive, hard on/off switch with software feedback and control. In other words, it's like the on/off switch on a laptop....

SF-SPX-17870

You may be familiar with the classic HC-SR04 distance sensor, it is great for providing non-contact distance readings from 2cm to 400cm. The SparkF...

SF-SEN-17777

Is your project linked to environmental protection, awareness or study, or to protecting human life? Perhaps you are developing a wildlife tracker,...

SF-SPX-17236

Passive Infrared (PIR) sensors are great for detecting motion in a small area around the sensor. The 170µA SparkFun EKMC4607112K PIR Breakout is a ...

SF-SEN-17372

The ESP32-WROOM-32E is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor netwo...

SF-WRL-17830

Designed for transmit and receive at 401MHz, this quarter-wave antenna is the perfect partner for our ARGOS ARTIC R2 satellite communication breako...

SF-WRL-17523

Passive Infrared (PIR) sensors are great for detecting motion in a small area around the sensor. The 1µA SparkFun EKMB1107112 PIR Breakout is a si...

SF-SEN-17373

Passive Infrared (PIR) sensors are great for detecting motion in a small area around the sensor. The 170µA SparkFun EKMC4607112K Qwiic PIR uses an ...

SF-SEN-17374

Passive Infrared (PIR) sensors are great for detecting motion in a small area around the sensor. The 1µA SparkFun EKMB1107112 Qwiic PIR uses an EKM...

SF-SEN-17375

This product is designed to connect the RTK Surveyor product line to the popular Serial Telemetry Radios. But if you're like me, it's great to have...

SF-CAB-17239

This is a handy cable for connecting a four pin GHR-04V type locking connector to breadboard friendly male pins. These cables are already included ...

SF-CAB-17240

The MicroMod Qwiic Carrier Board can be used to rapidly prototype with other Qwiic devices. The MicroMod M.2 socket provides users the freedom to e...

SF-DEV-17723

The MicroMod Qwiic Carrier Board can be used to rapidly prototype with other Qwiic devices. The MicroMod M.2 socket provides users the freedom to e...

SF-DEV-17724

The Loomia Double Backlit User Interface is like the Single Backlit Button, but twice the fun! Use this part if you need to control something up an...

SF-COM-17865

Do you have a Raspberry Pi 4 laying around or got one as a gift and would like to use it? This is the kit for you. Everything you would find in the...

SF-KIT-17726

This is a 300mm long Male TNC to Male SMA cable. This is an excellent cable for connecting one of our RTK development boards to a high quality 'UFO...

SF-CAB-17833

Based on the MAX17048, the Qwiic Fuel Gauge is perfect for monitoring your single-cell LiPo. While the MAX17048 provides pack voltage, it really sh...

SF-SPX-17715

This is a simple 300mm long Male RP-TNC to Male SMA cable. Each cable is capable of a nominal impedance of 50Ω with a cutoff frequency of 39GHz. Th...

SF-CAB-17496

This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured ...

SF-CAB-17831

The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by pro...

SF-BOB-16446

The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by pro...

SF-BOB-16445

The SparkFun SGP40 Air Quality Sensor provides a measurement of the quality of the air in your room or house. The SGP40 is based on Sensirion's CMO...

SF-SEN-18345

With the SparkFun Cryptographic Development Kit you will get everything you need to learn the fundamentals of cryptographic authentication and how ...

SF-KIT-18303

The SparkFun OpenLog Artemis Kit is intended to provide everything you need to log the data of your choice with the OpenLog Artemis and the Qwiic E...

SF-KIT-18295

The SparkFun MicroMod Teensy Processor leverages the awesome computing power of the NXP iMXRT1062 chip and pairs it with the M.2 MicroMod connector...

SF-DEV-16402

The SCD41 from Sensirion is a high quality Photoacoustic based CO₂ sensor capable of detecting 0 to 40000ppm with high accuracy over 400-5000ppm ±(...

SF-SPX-18366

A U.FL to SMA (jack) bulkhead straight connector with a 1.32 mm diameter cable. Less than -2 dB cable insertion loss up to 6 GHz. Both connectors a...

SF-WRL-18154