New Products

This spool of solid-core wire is easily soldered to and can handle up to 200°C and 600V. We like this wire because it's flexible but also holds its...

AF-2988

This battery holder features two 6″, 24-gauge leads that have 5 mm of insulation stripped off of the ends.

PL-1159

A simple slide potentiometer can go a long way. Rated at 10KOhm and 0.1W. Comes with solder tab connections. The pot has an overall travel of 30mm ...

SF-COM-11621

Overview These cylindrical brushed DC gearmotors are available in a wide range of gear ratios, from 25:1 up to 488:1, and with three different mot...

PL-3485

ARM mbed application board, top view. ARM mbed application board, bottom view. ARM mbed application board with ARM mbed NXP LPC1768 dev...

PL-2155

The latest MiniPOV kit is for serial ports so more people can use it! A simple POV toy for beginners who are looking to learn how to solder, how to...

AF-20

PL-1158

This spool of solid-core wire is easily soldered to and can handle up to 200°C and 600V. We like this wire because it's flexible but also holds its...

AF-2986

Particle’s IoT (Internet of Things) hardware development board, the Photon, provides everything you need to build a connected project. Particle has...

SF-WRL-13764

PL-1157

The Adafruit "midnight hacker" is a Leatherman Squirt ES4 and a very handy, unique key-chain size multi-tool. The E4 sets you up with 20GA, 18GA, 1...

AF-36

A simple slide potentiometer can go a long way. Rated at 10KOhm and 0.1W. Comes with solder tab connections. The pot has an overall travel of 20mm ...

SF-COM-11620

This rubber wheel is used in our popular 4WD mobile platforms. It can be mounted directly onto micro gear motors, but also compatible with our m...

DF-FIT0336

Overview The mbed NXP LPC11U24 development board from ARM enables quick and easy creation of low-cost prototypes. Based on the low-power NXP LPC1...

PL-2154

A Feather board without ambition is a Feather board without FeatherWings! This is the Non-Latching Mini Relay FeatherWing. It gives you power to co...

AF-2895

This battery holder features two 6″, 24-gauge leads that have 5 mm of insulation stripped off of the ends.

PL-1155

Did you get your hands on a Raspberry Pi and need a little monitor to complete your tiny desktop computer? Or maybe you just need a good field moni...

SF-LCD-11612

The Si7021 is a low-cost, easy-to-use, highly accurate, digital humidity and temperature sensor. This sensor is ideal for environmental sensing and...

SF-SEN-13763

USBtinyISP is a simple open-source USB AVR programmer and SPI interface. It is low cost, easy to make, works great with avrdude, has both 6 and 10 ...

AF-46

Sharp GP2Y1010AU Dust Sensor requires some wiring on the breadboard and a list of components to make it Arduino compatible. This has turned down...

DF-DFR0280

Overview These cylindrical brushed DC gearmotors are available in a wide range of gear ratios, from 25:1 up to 488:1, and with three different mot...

PL-3484

This battery holder features two 6″, 24-gauge leads that have 5 mm of insulation stripped off of the ends.

PL-1154

Overview These cylindrical brushed DC gearmotors are available in a wide range of gear ratios, from 25:1 up to 488:1, and with three different mot...

PL-3483

Works with the Uno! This prototyping shield is the best out there (well, we think so, at least). It works with UNO, NG, Diecimila and Duemilanove A...

AF-51

This battery holder features two 6″, 24-gauge leads that have 5 mm of insulation stripped off of the ends.

PL-1153

The SparkFun MPU-9250 IMU Breakout features the latest 9-axis MEMS sensor from InvenSense. Each of these 9DoF breakouts feature an MPU-9250 with a ...

SF-SEN-13762

Please see the mbed NXP LPC1768 development board and m3pi robot product pages for more information.

PL-2153

A Feather board without ambition is a Feather board without FeatherWings! This is the Latching Mini Relay FeatherWing. It gives you power to contro...

AF-2923

Overview These cylindrical brushed DC gearmotors are available in a wide range of gear ratios, from 25:1 up to 488:1, and with three different mot...

PL-3482

This CMUcam4 Arduino Shield is Discontinued Now, We recommend another Arduino Shields as a suitable replacement. The goal of the Carnegie Mell...

DF-SEN0122

This battery holder features two 6″, 24-gauge leads that have 5 mm of insulation stripped off of the ends.

PL-1152

Are you a super spy trying to spot ninja assassins in the dark? Or maybe you’re just trying to figure out who’s been sneaking to the kitchen at nig...

SF-SEN-11610

The m3pi expansion kit gives 3pi robot users a convenient way to upgrade the functionality of their robots by adding more features, enabling the u...

PL-2152

In the ever-increasing need and awareness for health and safety, water has become a focus point for proper disinfection treatment as aftereffect...

DF-SEN0165

This is just the microcontroller burned with the USBtinyISP firmware code. If you're buying a kit, this is included. This is intended for people wh...

AF-54

This battery holder features two 6″, 24-gauge leads that have 5 mm of insulation stripped off of the ends.

PL-1151

These are ¼th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 100 Ohm resistors make excellent pull-ups, ...

SF-COM-13761

Overview The m3pi robot is a fully-assembled, upgraded version of our popular 3pi robot. It consists of a 3pi robot base connected to an assemble...

PL-2151

In collaboration with Microsoft, Adafruit's releasing IoT Starter Kits with boards, sensors, and components that are 'Azure Certified for IoT.'Azur...

AF-3032

This battery holder features two 6″, 24-gauge leads that have 5 mm of insulation stripped off of the ends.

PL-1150

USB On-The-Go is a really useful USB specification! It allows some small devices that would usually be unable to act as a host to have limited host...

SF-CAB-11604

These are ¼th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 1K Ohm resistors make excellent pull-ups, p...

SF-COM-13760

This is just the PCB for a proto shield. No other parts are included. This shield is designed for the Arduino Uno, NG and Decimila Arduinos. For...

AF-55

INTRODUCTION This is a breakout board for the fully integrated Hall Effect based linear ACS758 current sensor. The sen...

DF-SEN0098

This battery holder features two 6″, 24-gauge leads that have 5 mm of insulation stripped off of the ends.

PL-1149

Overview These cylindrical brushed DC gearmotors are available in a wide range of gear ratios, from 25:1 up to 488:1, and with three different mot...

PL-3481

Do you have a good understanding of various sensors or need a variety of them for a project? This kit includes a sensor for just about every job. W...

SF-DEV-13754