New Products

This is a 300MXL Timing belt. It was commonly used in 3D printer such as Reprap and ultimater. SPECIFICATIONS Type:B300MXL L...

DF-FIT0236

70×8mm wheel with tire removed. Description These wheels are designed to press-fit securely onto the 3mm D output shafts on many of our gear...

PL-1429

Overview These low-cost linear actuators are 12V DC gearmotors that use a worm drive to move a shaft back and forth along its length. The worm dr...

PL-2337

Lighting clamps are used for securing pinspot lights and accessories to lighting stands. Measures 78(L) x 45(D)mm. Specific...

TB-SL2969

These standard gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anything else that needs to ...

SF-ROB-12144

The Electrically Isolated USB EZO™ Carrier Board allows you to connect your Atlas Scientific circuit directly to your computer or Raspberry Pi. Bui...

SF-SEN-14091

Solder wick, coffee, and paper towels keep SparkFun running. You can steal someone’s diagonal cutters for a minute, but you’d better ask before tou...

SF-TOL-08775

This is a B100MXL Timing belt which is commonly used in 3D printer or CNC machine. SPECIFICATIONS Type:B100MXL LP:203.20mm ...

DF-FIT0235

The premise of this MicroUSB to 5.5/2.1mm DC Barrel Jack Adapter is simple. There's a MicroUSB plug on one end and a 5.5mm/2.1mm DC barrel jack wit...

AF-2789

With imperial standard shaft & bushings made to our rigid engineering specifications. The potentiometers are full size - 24mm diameter ...

TB-RP3762

spare parts to keep your TL4100 Printer in full working order. Happy printing! Specifications Warranty: 3 Months

TB-TL4106

These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 250:1 and operate up to 12 volts and have a sta...

SF-ROB-12143

These are 8mm (0.31") ball bearings. They will fit on 8mm (0.31") rods.​ SPECIFICATIONS Model:688zz Inner diameter:8mm (0.31"...

DF-FIT0238

The SIS-2 monitors an IR receiver, and when a certain remote code is detected, an output pin will toggle. Two outputs are available and any code on...

SF-SEN-08753

This is the ORP Kit, a large sensor kit that measures the ability of a solution to act as an oxidizing or reducing agent. Inside the kit you will f...

SF-SEN-14090

70×8mm wheel with tire removed. Description These wheels are designed to press-fit securely onto the 3mm D output shafts on many of our gear...

PL-1428

Overview These low-cost linear actuators are 12V DC gearmotors that use a worm drive to move a shaft back and forth along its length. The worm dr...

PL-2336

These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 20 teeth with a g...

SF-ROB-12142

ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!These are  25 Packs of R...

AF-2892

Spare parts to keep youre TL4100 Printer in full working order. Happy printing! Specifications Warranty: 3 Months

TB-TL4107

These 12" long stainless steel shafts have a diameter of 3/8". These shafts are solid, which makes them an ideal choice for axles. These shafts hav...

SF-ROB-12141

This is a SOP16/SOP28/SSOP28 to DIP16/DIP28 Adapter Board.You can change the SOP16/SOP28/SSOP28 to DIP16/DIP28 packaging.So that You needn't to ...

DF-FIT0291

Itsy Bitsy Teenie Weenie Mini NeoPixel RGB LED-inis! Make your own smart LED arrangement with the same integrated LED that is used in our NeoPixel ...

AF-2659

Flip-Pins are a fantastic new way to add headers to your breakout board. Designed by Fliptronics, Flip-Pins are the third generation of the Integra...

SF-COM-14087

These pinion gears attach to a 6mm D-shaft or gear motor using a setscrew. These gears have 32 teeth with a gear pitch of 32P, an outer diameter of...

SF-ROB-12140

This is a SOP8 to DIP8 Adapter Board. You can change the SOP8 to DIP8 packaging.So that You needn't to buy the DIP chips for prototyping special...

DF-FIT0290

Fantastically stylish with touch-sensing brightness control. It’s rechargeable and will run for up to 12hrs depending on the brightness set...

TB-SL3145

Overview These low-cost linear actuators are 12V DC gearmotors that use a worm drive to move a shaft back and forth along its length. The worm dr...

PL-2333

These gray “skate” wheels have an outer diameter of 2.975”, an inner diameter of 0.87”, and a width of 0.94”. When used in conjunction with the ska...

SF-ROB-12139

70×8mm wheel with tire removed. Description These wheels are designed to press-fit securely onto the 3mm D output shafts on many of our gear...

PL-1427

spare parts to keep your TL4100 Printer in full working order. Happy printing!

TB-TL4108

SPECIFICATIONS Type: LM6UU Inner diameter: 6mm (0.24") Outer diameter: 12mm (0.47") Length: 35mm (1.38") SHIPPI...

DF-FIT0239

Flip-Pins are a fantastic new way to add headers to your breakout board. Designed by Fliptronics, Flip-Pins are the third generation of the Integra...

SF-COM-14086