New Products

Do you make time to talk to your Arduino? Maybe you should! The EasyVR 3 Plus Shield is a voice recognition shield for Arduino boards integrating a...

SF-COM-15453

The FT5335M-FB is a specially modified version of FEETECH’s FT5335M ultra-high-torque, high-voltage digital giant servo that provides access to the...

PL-3446

The FT1117M-FB is a specially modified version of FEETECH’s FT1117M miniature-sized servo that provides access to the feedback potentiometer throug...

PL-3440

The FS5115M-FB is a specially modified version of FEETECH’s FS5115M standard-size high-torque analog servo that provides access to the feedback pot...

PL-3443

This is the HC-SR04 ultrasonic distance sensor. This economical sensor provides 2cm to 400cm of non-contact measurement functionality with a rangin...

SF-SEN-15569

This is the Teensy Audio Adapter Board that can be added to a Teensy 3.0, 3.1, 3.2, 3.5 or 3.6 for your next audio project. The shield provides you...

SF-DEV-15421

This is a class 10, 16GB, micro SDHC card that has been pre-installed with the NOOBS operating system for the Raspberry Pi produced in house here a...

SF-COM-15052

The ESP-32-based M5Stick-C is a wee, super portable, open-source IoT development board, like a fun-sized version of the M5Stack. Jam-packed with a ...

AF-4289

These cylindrical brushed DC gearmotors are available in a wide range of gear ratios and with five different motors (two power levels of 6 V motors...

PL-4890

The first time you soldered up a surface mount component you may have been surprised "these are really small parts!" and there's a dozen of differe...

AF-4319

The ESP-32-based M5Stick-C is a wee, super portable, open-source IoT development board, like a fun-sized version of the M5Stack.Jam-packed with a W...

AF-4290

If you're building a IoT project and need to send data back-and-forth, the WiFi module built into newer Pi's should be fine for most cases. But, wh...

AF-4327

From the creative and cat-lovin' engineers at KittenBot comes the Meowbit - a handheld retro gaming computer for coding your own games with MakeCod...

AF-4324

From the creative engineers at KittenBot, this plug-in add on for the micro:bit expands your 'bit to add a bunch more hardware to play with. It's a...

AF-4325

This is hot! Literally! Apply 5-12VDC and the stainless steel fibers in this heating fabric will warm up, creating a little heating pad. On one han...

AF-4308

The FS0403-FB is a specially modified version of FEETECH’s FS0403 sub-micro analog servo that provides access to the feedback potentiometer through...

PL-3438

These cylindrical brushed DC gearmotors are available in a wide range of gear ratios and with five different motors (two power levels of 6 V motors...

PL-4887

These cylindrical brushed DC gearmotors are available in a wide range of gear ratios and with five different motors (two power levels of 6 V motors...

PL-4884

EagLED is Littlebird Electronics' wearables/e-textiles development kit. It is a complete Arduino compatible microcontroller that has LEDs, Light Se...

LB-EAGLED-BUZZ

Looking for something extra to jazz up your papercraft, cardboard or  robotics project? These nose Stickers - they'll will make an excellent additi...

LB-NOSE

Looking for something extra to jazz up your papercraft, cardboard or  robotics project? These mouth Stickers - they'll will make an excellent addit...

LB-MOUTH

Looking for something extra to jazz up your papercraft, cardboard or  robotics project? We spy with our little eyes these Coloured Eye Stickers - t...

LB-EYE-COLOUR

The Little Bird Aluminum Alloy Case with Cooling Heatsink is made of aluminum alloy created through CNC machining manufacturing technology. This co...

LB-HEAT-CASE

This protective case used for micro:bit.  It comes in 3 colours  red, blue, orange. The shell has two different sides, dot matrix display area, mic...

YH-6000300244

EF-EF09086

This is a battery box specialized for micro:bit. You can place two AAA batteries into the battery holder, switch on and then it will supply power t...

EF-EF11085

Teensy 4.0 is the latest Teensy, offering the fastest microcontroller and powerful peripherals in the Teensy 1.4 by 0.7 inch form factor. It featur...

PJ-TEENSY4

** NOTE - THIS KIT DOES NOT CONTAIN A RASPBERRY PI 4 - COMPONENTS ONLY ** This exclusive Raspberry Pi Essentials Kit from Little Bird includes ever...

LB-RPI4-ESSENTIALKIT-NOPI

Offering more flexibility than the BBC micro:bit Go Bundle After feedback from our educational customers, we can now offer a multi-classroom kit fo...

LB-BK-MICRO-100

The TMP117AIDRVT is a high precision temperature sensor equipped with an I2C interface. It outputs temperature readings with high precision of +/- ...

SF-SPX-15413

Blink any color you need! Use the LilyPad RGB LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can produce a b...

SF-DEV-13735

Looking for an option to sense ambient light? The VEML6030 Qwiic board is a great starter option. The VEML6030 is a high accuracy ambient light sen...

SF-SEN-15436

The MCP9600 is a high accuracy thermocouple amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two tempe...

SF-SPX-15508

There are a couple must-have boards that every engineer and hobbyest should have on their desk, and this PCA9306 dual, bidirectional voltage-level ...

SF-BOB-15439

The SparkFun Lightning Detector adds lightning detection to your next weather station to make sure you are aware of any potential hazardous weather...

SF-SEN-15441

These cylindrical brushed DC gearmotors are available in a wide range of gear ratios and with five different motors (two power levels of 6 V motors...

PL-4881

This motor with integrated 48 CPR (counts per revolution) quadrature encoder is intended as a replacement low-power (LP) 12 V motor with encoder fo...

PL-4880

This Raspberry Pi 4 Black Case with Fan is made from sleek black aluminum and has an exhaust hole surface for perfect heat dissipation. All ports a...

LB-PI4BLACK

3V - 5V 40MA E-Textiles LED Module   Paramater: Working voltage: 3V - 5V Working current: 40mA   Package included: LilyPad compatible LED Module  

LB-LR0220-B

This RTC & Klimate board is a Real Time Clock (RTC) and environmental sensor (BME280) interface for the BBC microbit. The environmental sensor ...

KI-5636

Tiny:bit is a robotic car for the micro:bit education market. It is compact, easy to assemble, and easy to move in tight spaces. The Tiny:bit smart...

YH-TINYBIT

This is a small solid crystal acrylic case. You can place your micro:bit into it. It can wrap up the whole body of micro:bit board except the two b...

EF-EF10111

If you're building a Raspberry Pi project and need to send data back-and-forth, the WiFi module built into newer Pi's should be fine for most cases...

AF-4284

Extend and expand your Circuit Playground projects with a bolt on Perma-Proto that lets you connect solderable circuits in a sturdy and reliable fa...

AF-4320

The Pololu A-Star 32U4 Prime is a general-purpose programmable board based on the ATmega32U4 AVR microcontroller from Microchip (formerly Atmel) an...

PL-4006

We've been looking for a display like this for a long time - it's so small only 1.3" diagonal but has a high density 260 ppi, 240x240 pixel display...

AF-4313

If you have a Raspberry Pi LoRa project using our fancy 8-Channel LoRa HAT you want enclosed, and need something extra durable, this enclosure is a...

AF-4283

Slip slidin' away Slip slidin' away You know the nearer your resistance The more you're slip slidin' awayIf you're tired of the regular-old-twisty ...

AF-4272