Pololu Australia

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1802

This 12-inch (30-cm) cable has 26 AWG wires with a 3-pin female JST PH-style connector (2 mm) that works with Sharp analog distance sensors that h...

PL-1799

Overview The Pololu G2 high-power motor driver is a discrete MOSFET H-bridge designed to drive large brushed DC motors. The H-bridge is made ...

PL-2994

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1759

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1756

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1754

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1753

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1751

This version of our A4988 Stepper Motor Driver Carrier ships with 0.1″-pitch male header pins installed as shown in the main product picture, so n...

PL-2980

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1748

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1747

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1745

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1742

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-1740

This current sensor is a carrier board or breakout board for Allegro’s ACS724 Hall effect-based linear current sensors; we therefore recommend care...

PL-4049

The D36V6x family of buck (step-down) voltage regulators generates lower output voltages from input voltages as high as 50 V. They are switching re...

PL-3798

Pololu step-down voltage regulator D36V6Fx/D24V6Fx/D24V3Fx next to a 7805 voltage regulator in TO-220 package.The D36V6x family of buck (step-down)...

PL-3796

Pololu step-down voltage regulator D36V6Fx/D24V6Fx/D24V3Fx next to a 7805 voltage regulator in TO-220 package.The D36V6x family of buck (step-down)...

PL-3795

Details for item #3283 This is a black polyurethane scooter/skate wheel that measures 200 mm in diameter and 30 mm in width. Note...

PL-3283

TB9051FTG Single Motor Driver Carrier, bottom view with dimensions. Overview The TB9051FTG from Toshiba is an H-bridge motor driver IC that ca...

PL-2997

Overview Dual MAX14870 Motor Driver for Raspberry Pi, top view with dimensions. This motor driver expansion board and its corresponding Pyth...

PL-3758

Overview The U3V70x boost (step-up) voltage regulators are high-current, high-efficiency synchronous switching regulators that generate higher o...

PL-2890