Pololu Australia

Overview This Arduino shield from Adafruit contains 40 individually addressable RGB LEDs arranged in a 5×8 matrix, and it only takes one pin t...

PL-2772

These Adafruit Perma-Proto Full-Sized Breadboard PCBs bridge the gap between solderless breadboards and standard perf-boards by providing a throug...

PL-2767

XYZrobot 6 DOF Robotic Arm holding a AA battery and next to a 12 oz. soda can for scale. Overview Build your own advanced robot arm with the...

PL-2743

MyoWare Muscle Sensor with electrodes attached, top view. (Electrodes not included.) This six-pack of single-use, disposable electrodes (Co...

PL-2733

0.25″-diameter short-tail force sensing resistor (FSR) next to a 0.2″-diameter FSR with a standard tail. Overview This force-sensing resist...

PL-2727

Overview These shrouded, male connectors work with female JST XH-style connectors, like those on the 2-pin female XH-style cable. The 2.5 mm pin ...

PL-2722

Overview These shrouded, male connectors work with female JST XH-style connectors, like those on the 2-pin female XH-style cable. The 2.5 mm pin ...

PL-2721

Overview These shrouded, male connectors work with female JST XH-style connectors, like those on the 2-pin female XH-style cable. The 2.5 mm pin ...

PL-2717

Overview These 0.1" female header strips are commonly used as low-cost connectors for custom-made cables or perforated prototyping PCBs. The stan...

PL-2707

Overview These 0.1" female header strips are commonly used as low-cost connectors for custom-made cables or perforated prototyping PCBs. The stan...

PL-2706

Overview These 0.1" female header strips are commonly used as low-cost connectors for custom-made cables or perforated prototyping PCBs. The stan...

PL-2705

Overview These 0.1" female header strips are commonly used as low-cost connectors for custom-made cables or perforated prototyping PCBs. The stan...

PL-2703

PL-2699

PL-2698

PL-2697

PL-2695

This ball caster is an improved version of our original Pololu Ball Caster with 1″ Plastic Ball; we recommend this new version over the older vers...

PL-2692

Details for item #2689 The lead screw built into this stepper motor extends 18 cm (7″) from the face of the stepper motor and weighs 352 g (12.4...

PL-2689

Overview These light-weight aluminum shaft adapters convert a typical motor output shaft into a 12 mm hex shaft that is compatible with many commo...

PL-2687

These light-weight brackets (approximately 2 g each) are specifically designed for our larger Pololu plastic gearmotors (228:1 offset, 120:1 offs...

PL-2670

These 0.1″/2.54mm-pitch header strips are commonly used as low-cost connectors. The standard spacing allows use with solderless breadboards, perf...

PL-2667

This connector is a double-row, 14-pin, low-profile male header strip. The shortened pins have a length of 8.75 mm, which is 2.9 mm shorter than ...

PL-2663

We carry stranded hook-up wire in an assortment of gauges and colors: Stranded wire is more flexible than solid wire and is good for projects...

PL-2654

We carry stranded hook-up wire in an assortment of gauges and colors: Stranded wire is more flexible than solid wire and is good for projects wh...

PL-2652

We carry stranded hook-up wire in an assortment of gauges and colors: Stranded wire is more flexible than solid wire and is good for projects wh...

PL-2650

We carry stranded hook-up wire in an assortment of gauges and colors: Stranded wire is more flexible than solid wire and is good for projects wh...

PL-2639

We carry stranded hook-up wire in an assortment of gauges and colors: Stranded wire is more flexible than solid wire and is good for projects wh...

PL-2632

We carry stranded hook-up wire in an assortment of gauges and colors: Stranded wire is more flexible than solid wire and is good for projects wh...

PL-2630

We carry stranded hook-up wire in an assortment of gauges and colors: Stranded wire is more flexible than solid wire and is good for projects wh...

PL-2626

We carry stranded hook-up wire in an assortment of gauges and colors: Stranded wire is more flexible than solid wire and is good for projects...

PL-2609

Overview The Texas Instruments TPS2113A autoswitching power multiplexer allows you to switch seamlessly between two power sources of 2.8 V to ...

PL-2596

USB Mini-B connector breakout board, bottom view with dimensions. This board breaks out the VBUS, GND, D-, D+ and ID pins of a USB Mini-B co...

PL-2593

Overview This carrier board makes it easy to interface a microSD memory card (originally known as TransFlash) with an SPI-capable microcontrol...

PL-2587

Overview These sensor modules are based on Vishay’s TSSP77038 modulated infrared receivers. Unlike most IR receiver modules designed for remo...

PL-2579

Overview These step-up/step-down regulators take an input voltage from 3 V to 30 V and increase or decrease it as necessary to produce a fixed...

PL-2577

Overview These step-up/step-down regulators take an input voltage from 3 V to 30 V and increase or decrease it as necessary to produce a fixed 5...

PL-2574

Overview The mini-motor gearbox kit from Tamiya makes it easy to get a small robot or plastic model moving. The kit includes one brushed DC motor ...

PL-1684

Overview The mini-motor gearbox kit from Tamiya makes it easy to get a small robot or plastic model moving. The kit includes one brushed DC motor ...

PL-1683

Overview This adjustable boost (step-up) voltage regulator generates higher output voltages (between 2 V and 5.25 V) from input voltages as lo...

PL-2560

MaxBotix ultrasonic sensor line comparison chart. Overview The Maxbotics XL-MaxSonar family of sonar range finders offers very short- to lon...

PL-1654

Overview Adafruit 16-, 24-, and 4×15-LED NeoPixel rings being controlled by an A-Star 32U4 Micro. This NeoPixel ring from Adafruit consists ...

PL-2538

Overview These LED 10-packs are an easy way to add colorful and complex lighting effects to a project. Each RGB LED contains an integrated WS281...

PL-2536

Close up of one segment of a SK6812-based LED strip with the red, green, and blue LEDs on at their dimmest setting. Close up of an SK68...

PL-2528

Close up of one segment of a SK6812-based LED strip with the red, green, and blue LEDs on at their dimmest setting. Close up of an SK68...

PL-2526

Pololu DRV8835 Dual Motor Driver Shield for Arduino, bottom view with dimensions. Overview This motor driver shield and its corresponding Ar...

PL-2511

Overview Pololu dual VNH5019 motor driver shield for Arduino. This motor driver shield and its corresponding Arduino library make it easy to...

PL-2507

Overview These side-entry terminal blocks have terminals that hold and release wires through the simple adjustment of a small screw, allowing you ...

PL-2494

Overview These side-entry terminal blocks have terminals that hold and release wires through the simple adjustment of a small screw, allowing you ...

PL-2492