Pololu Australia

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-3950

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-3946

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-3945

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-3942

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-3940

Overview The MC33926 motor driver carrier can supply up to almost 3 A continuous current to a single brushed DC motor at 5 – 28 V, and it can ...

PL-1212

Bipolar stepper motor wires are terminated with bare leads. Bipolar stepper motor wiring diagram. Overview This hybrid bipolar stepping m...

PL-1206

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-3846

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-3844

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-3842

These premium 26 AWG stranded jumper wires are equivalent to our wires with pre-crimped terminals with 1×1 crimp connector housings already attach...

PL-3840

Note: This product is manufactured in Italy by affiliates of Arduino Srl, and the product packaging suggests downloading the Arduino IDE from ardu...

PL-2188

Bipolar stepper motor wires are terminated with bare leads. Bipolar stepper motor wiring diagram. Overview This small hybrid bipolar step...

PL-1204

This connector with leads makes a great power cable. The connector is keyed so that power cannot be reversed, and a latch secures the connection ...

PL-2179

This connector with leads makes a great power cable. The connector is keyed so that power cannot be reversed, and a latch secures the connection ...

PL-2178

Overview These cylindrical brushed DC gearmotors are available in a wide range of gear ratios, from 25:1 up to 488:1, and with three different mot...

PL-3711

Overview These cylindrical brushed DC gearmotors are available in a wide range of gear ratios, from 25:1 up to 488:1, and with three different mot...

PL-3709

This style of high-current connector is commonly used with the 7.2V battery packs that power many RC cars. The connector, sometimes called Ta...

PL-2173

This servo extension cable has three 22-AWG wires joining a male Futaba J connector and a female JR connector. Since a female JR connector can be...

PL-2169

These 0.1 μF 100 V ceramic capacitors have many uses, including noise suppression on motors. The leads are formed with 0.2" spacing for easy brea...

PL-1166

This 12" (300 mm) Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single f...

PL-2163

This battery holder features two 6″, 24-gauge leads that have 5 mm of insulation stripped off of the ends.

PL-1161

Overview These cylindrical brushed DC gearmotors are available in a wide range of gear ratios, from 25:1 up to 488:1, and with three different mot...

PL-3485

This battery holder features two 6″, 24-gauge leads that have 5 mm of insulation stripped off of the ends.

PL-1155