Pololu Australia

Note: We have released the second-generation Maestro USB servo controllers, which are better than this product in almost every way. This product...

PL-390

Overview A-Star 32U4 Prime SV, bottom view. The Pololu A-Star 32U4 Prime is a general-purpose programmable board based on the ATmega32U4 AVR...

PL-3112

Overview A-Star 32U4 Prime SV, bottom view. The Pololu A-Star 32U4 Prime is a general-purpose programmable board based on the ATmega32U4 AVR...

PL-3111

Pololu Atmel ATTINY26 Prototyping PC Board (SMT assembled) with all optional components populated. The Atmel ATtiny26 prototyping printed ci...

PL-389

This printed circuit board is perfect for quickly getting your next Atmel ATtiny26 microcontroller project going. The circuit board includes all ...

PL-388

This product is discontinued and has been replaced by the next-generation Qik 2s9v1 Dual Serial Motor Controller, which is better in virtually all...

PL-376

These wheels are designed to work with the Pololu 120:1 mini plastic gearmotors (offset output and 90-degree output) and the Solarbotics GM6 a...

PL-361

These wheels are designed to work with the Pololu 120:1 mini plastic gearmotors (offset output and 90-degree output) and the Solarbotics GM6 a...

PL-360

These 8-tooth, injection-molded sprockets are made to work with the rugged miniature tank tracks. This set comes with four sprockets made fro...

PL-359

These 8-tooth, injection-molded sprockets are made to work with the rugged miniature tank tracks. This set comes with four sprockets made fro...

PL-358

This 8″ × 5.5″ × 1.5″ plastic parts box has adjustable compartments, two secure latches, and rounded compartment bottoms for easy retrieval of sma...

PL-355

Pre-cut and pre-stripped wires simplify and speed up breadboarding work. Having exactly the right wire lengths for the job also makes your project...

PL-347

These super-bright, white LEDs are a great way to accent any robotics or electronics project. These are brand-new LEDs with water-clear lenses an...

PL-343

These brilliant blue LEDs are a great way to accent any robotics or electronics project. These are brand-new LEDs with water-clear lenses and a 1...

PL-341

The Pololu 5" round prototyping printed circuit board (PCB) is a general-purpose prototyping board for developing your own custom electronics ...

PL-330

Overview A-Star 32U4 Prime LV, bottom view. The Pololu A-Star 32U4 Prime is a general-purpose programmable board based on the ATmega32U4 AVR...

PL-3106

Discontinuation Notice: This item will be discontinued once its current stock runs out. Please consider one of our other robot kits as an alterna...

PL-326

Note: This product has been discontinued. Please consider the OWI-535 Robotic Arm Edge Kit as an alternative. The OWI Robotic Arm Trainer is ...

PL-325

Build your own little digital keyboard that spans three octaves and has eight voices. This kit does not require soldering, so the only tool you n...

PL-323

Note: This product has been replaced by the Elenco M-1008K Multimeter kit. A digital multimeter (DMM) is one of the most useful tools for any elec...

PL-322

This robot kit is rated as at the intermediate level and recommended for builders age 14 and up. Only basic hand tools are needed for assembl...

PL-319

The OWI Weasel Robot is a great beginner-level robot kit that teaches you about two of the most basic robotic actions: wall hugging and line ...

PL-318

The OWI-9870 Jungle Robot has been discontinued. Please consider one of our other robot kits. Overview The OWI Jungle Robot is an excellent be...

PL-317

Introduction Assembly of your LP-535 Logic Probe Kit will prove to be an exciting project and give you much satisfaction and personal achievement....

PL-314

The hexapod monster is a six-legged robot that walks forward until it detects an obstacle, in which case it backs up and turns before resuming its...

PL-303

Note: this version has been replaced by the Pololu serial 8-servo partial kit. The Pololu serial 8-servo controller allows you to control up to ei...

PL-290

This chip is a Microchip PIC16C63A microcontroller programmed with our serial 16-servo controller firmware. You can use the chip either as a re...

PL-280

This chip is a Microchip PIC16F628A microcontroller programmed with our serial 8-servo controller firmware. You can use the chip either as a re...

PL-276

A-Star 32U4 Mini SV: comparison of original ac02c version (left) to newer ac02f version (right). Discontinuation notice: this original versi...

PL-3104

The Pololu serial 16-servo controller allows you to control up to sixteen RC servos from almost any robot controller or computer. The interface t...

PL-240

This product is discontinued; please see the Aluminium Standoff 4-Pack 1.25-inch M-F, which is very similar. These metal, hexagonal standoffs ...

PL-230

Note: This product has been replaced by a newer version Orangutan SV-328. Overview Pololu Orangutan Robot Controller back view. The Oranguta...

PL-225

These 8-tooth, injection-molded sprockets are made to work with the rugged miniature tank tracks. This set comes with four sprockets made fro...

PL-224

This product has been replaced by the Baby Orangutan B-328 and is now discontinued. Overview The Baby Orangutan is a complete control solutio...

PL-216

This product has been replaced by the new Baby Orangutan B-328 and is now discontinued. Overview The Baby Orangutan is a complete control sol...

PL-215

Shoulder bolt dimensions: 1/4" shoulder diameter (Dia.) 5/8" shoulder length (Lg.) 10-24 thread, 3/8" long 3/8" head diameter, 3/16" heig...

PL-209

Overview The Pololu A-Star 32U4 Mini boards are general-purpose programmable modules based on the ATmega32U4 AVR microcontroller from Microchip (f...

PL-3102

Discontinuation notice: This product has been replaced by our newer Maestro USB servo controllers, which are better in almost every way. These ...

PL-208

Discontinuation notice: This product has been replaced by our newer Maestro USB servo controllers, which are better in almost every way. These ...

PL-207

New version available! Please see the new version of the Pololu 30-Amp motor driver board. This page is left up as a reference for customers that...

PL-205

These wheels are designed to work with the Pololu 120:1 mini plastic gearmotors (offset output and 90-degree output) and the Solarbotics GM6 a...

PL-191

These wheels are designed to work with the Pololu 120:1 mini plastic gearmotors (offset output and 90-degree output) and the Solarbotics GM6 a...

PL-190

Discontinuation notice: This ball caster has been discontinued by our supplier. Please consider a Pololu ball caster as an alternative. This...

PL-174

This single-pole, double-throw (SPDT) snap-action switch has a long, three-inch lever that you can bend or cut to suit your application. The swi...

PL-171

This wire stripper cleanly strips the tips of 16-26 AWG wires. With a comfortable cushion grip, this tool will prove handy in almost all electroni...

PL-161

Overview Close up of an SK9822, with the red, green, and blue LEDs on at a low brightness. These flexible RGB LED panels based on the SK9822...

PL-3094

This item has been replaced by a new version. This page is left here for reference purposes only, and this item is no longer available for orderi...

PL-125