Pololu Australia

Chassis for the Tamiya 58280 TXT-1. The Tamiya TXT-1 (Tamiya Xtreme Truck) is the ultimate 1/10 scale monster truck chassis, making it a gre...

PL-123

This product is discontinued and has been replaced by the next-generation Qik 2s9v1 Dual Serial Motor Controller, which is better in virtually all...

PL-110

Overview Close up of an SK9822, with the red, green, and blue LEDs on at a low brightness. These flexible RGB LED panels based on the SK9822...

PL-3093

This excellent kit from Joinmax Digital includes all of the components you need to create a six-legged, walking robot. Each of the six legs h...

PL-98

This robotic arm kit includes all of the components you need to build your own robot arm. Seven servos provide six degrees of freedom, allowing yo...

PL-97

This excellent quadruped robot kit includes all of the components you need to build your own four-legged, walking robot. Each leg has two degrees ...

PL-96

Overview This robotic dog kit includes all of the components you need to build your own robot dog. In total, this robot has 15 degrees of free...

PL-95

We carry a wide variety of servos, from ultra-high-torque monster servos with up to 1600 oz-in of torque, to sub-micro servos weighing less t...

PL-94

Overview Close up of an SK9822, with the red, green, and blue LEDs on at a low brightness. These flexible RGB LED panels based on the SK9822...

PL-3092

This robotic gripper kit is the same gripper that is used in the Joinmax Digital Hexapod Monster and Robot Arm, except that it is gray instead...

PL-93

The shoulder joint set contains enough parts to connect three Joinmax Digital servos to create a shoulder and elbow joint identical to the one...

PL-92

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1899

This servo elbow joint kit allows you to connect two Joinmax Digital servos to create an elbow joint as shown to the right. The same set of p...

PL-91

Discontinuation Notice: This product has been discontinued. Please consider one of our other robot kits as an alternative. Tribotz Overview T...

PL-83

The iBOTZ MR-1004 Hydrazoid has been discontinued. Please consider one of our other robot kits. Hydrazoid Overview The iBOTZ Hydrazoid is a go...

PL-82

Antoid Overview The iBOTZ Antoid is a unique, beginner-level robot kit that features one of the most basic functions found in autonomous robot...

PL-81

Overview Close up of one segment of an SK9822-based LED strip, with the red, green, and blue LEDs on at a low brightness. Close up of an S...

PL-3091

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1898

Discontinuation Notice: This product has been discontinued. Please consider one of our other robot kits as an alternative. This robot kit is desi...

PL-80

Note: This product has been replaced by a new Tamiya 70198 Wall-Hugging Mouse and the Tamiya 70195 Wall-Hugging Ladybug. The wall hugging mouse s...

PL-75

This item has been replaced by a new version. This page is left here for reference purposes only, and this item is no longer available for orderi...

PL-1

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1897

Overview Close up of one segment of an SK9822-based LED strip, with the red, green, and blue LEDs on at a low brightness. Close up of an S...

PL-3090

Overview The Pololu adjustable boost regulator is a very flexible switching regulator (also called a switched-mode power supply, SMPS, or DC-t...

PL-799

Discontinuation notice: The NCP1402 IC used by this voltage regulator has been discontinued by the manufacturer. We strongly recommend our newer ...

PL-798

Overview Close up of one segment of an SK9822-based LED strip, with the red, green, and blue LEDs on at a low brightness. Close up of an S...

PL-3089

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1895

Overview Close up of one segment of an SK9822-based LED strip, with the red, green, and blue LEDs on at a low brightness. Close up of an S...

PL-3088

MaxBotix ultrasonic sensor line comparison chart. Overview The Maxbotix LV-MaxSonar-EZ family of sonar range finders offers very short- to l...

PL-794

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1894

MaxBotix ultrasonic sensor line comparison chart. Overview The Maxbotix LV-MaxSonar-EZ family of sonar range finders offers very short- to l...

PL-793

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1893

Overview Close up of one segment of an SK9822-based LED strip, with the red, green, and blue LEDs on at a low brightness. Close up of an SK98...

PL-3087

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1892

MaxBotix ultrasonic sensor line comparison chart. Overview The Maxbotix LV-MaxSonar-EZ family of sonar range finders offers very short- to l...

PL-792

Overview Close up of one segment of an SK9822-based LED strip, with the red, green, and blue LEDs on at a low brightness. Close up of an S...

PL-3086

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1891

Overview The Pololu adjustable boost regulator is a very flexible switching regulator (also called a switched-mode power supply, SMPS, or DC-t...

PL-791

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-3082

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1890

This 12" (300 mm) Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single f...

PL-788

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1889

This servo extension cable has female JR connectors on both ends, so it can be used to make connections between devices with 0.1" 3-pin male heade...

PL-785

This servo extension cable has female JR connectors on both ends, so it can be used to make connections between devices with 0.1" 3-pin male heade...

PL-780

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1888

This servo extension cable has female JR connectors on both ends, so it can be used to make connections between devices with 0.1" 3-pin male heade...

PL-779

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-3080