Pololu Australia

This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications....

PL-2181

A4983/A4988 stepper motor driver carrier with dimensions. Overview This product is a carrier board or breakout board for Allegro’s A4988 DMO...

PL-1182

A4988 stepper motor driver carrier, Black Edition, bottom view with dimensions. Overview This product is a carrier board or breakout board f...

PL-2128

These universal mounting hubs are designed to work with most 6 mm diameter shafts, including round shafts and “D” shafts. Each of the two include...

PL-1083

Overview The Pololu step-up/step-down voltage regulator S10V2F12 is a switching regulator (also called a switched-mode power supply (SMPS) or ...

PL-2096

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-3332

Overview These 0.1" straight female header strips are commonly used as low-cost connectors for custom-made cables or perforated prototyping PCBs. ...

PL-1030

Overview These 0.1" straight female header strips are commonly used as low-cost connectors for custom-made cables or perforated prototyping PCBs. ...

PL-1022

Overview This ball caster kit includes a black ABS housing, a 3/4″ diameter metal ball, two spacers (1/16″ and 1/8″ thick), and two #2 screw s...

PL-955

Pololu ball caster with 3/8" metal ball with included hardware. Overview This ball caster kit includes a black ABS housing, a 3/8″ diameter ...

PL-951

These universal mounting hubs are designed to work with most 4 mm diameter shafts, including round shafts, and “D” shafts. Each of the two includ...

PL-1997

These connectors can be crimped onto ribbon cable to make custom cables that match our 2×3-pin shrouded male header: Shrouded 2×3-pin box header...

PL-855

This connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This pack c...

PL-1936

This Futaba J connector has a 0.1" pin spacing and is found on many Futaba servos. It is keyed with a polarizing tab that enforces proper orientat...

PL-1926

Overview These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with var...

PL-1919

Overview This kit includes two dual-channel Hall Effect sensor boards and two 6-pole magnetic discs that can be used to add quadrature encoding to...

PL-3081

This battery holder features two 6″, 24-gauge leads that have 5 mm of insulation stripped off of the ends.

PL-142

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1817

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1810

This version of our Black Edition A4988 Stepper Motor Driver Carrier ships with 0.1″-pitch male header pins installed as shown in the main product...

PL-2981

The FS5115M-FB is a specially modified version of FEETECH’s FS5115M standard-size high-torque analog servo that provides access to the feedback pot...

PL-3443

TB67H420FTG Dual/Single Motor Driver Carrier, bottom view with dimensions. Overview The TB67H420FTG from Toshiba is an H-bridge motor driver...

PL-2999