Pololu Australia

Shoulder bolt dimensions: 1/4" shoulder diameter (Dia.) 5/8" shoulder length (Lg.) 10-24 thread, 3/8" long 3/8" head diameter, 3/16" heig...

PL-209

Overview The Pololu A-Star 32U4 Mini boards are general-purpose programmable modules based on the ATmega32U4 AVR microcontroller from Microchip (f...

PL-3102

Discontinuation notice: This product has been replaced by our newer Maestro USB servo controllers, which are better in almost every way. These ...

PL-208

Discontinuation notice: This product has been replaced by our newer Maestro USB servo controllers, which are better in almost every way. These ...

PL-207

New version available! Please see the new version of the Pololu 30-Amp motor driver board. This page is left up as a reference for customers that...

PL-205

These wheels are designed to work with the Pololu 120:1 mini plastic gearmotors (offset output and 90-degree output) and the Solarbotics GM6 a...

PL-191

These wheels are designed to work with the Pololu 120:1 mini plastic gearmotors (offset output and 90-degree output) and the Solarbotics GM6 a...

PL-190

Discontinuation notice: This ball caster has been discontinued by our supplier. Please consider a Pololu ball caster as an alternative. This...

PL-174

This single-pole, double-throw (SPDT) snap-action switch has a long, three-inch lever that you can bend or cut to suit your application. The swi...

PL-171

This wire stripper cleanly strips the tips of 16-26 AWG wires. With a comfortable cushion grip, this tool will prove handy in almost all electroni...

PL-161

Overview Close up of an SK9822, with the red, green, and blue LEDs on at a low brightness. These flexible RGB LED panels based on the SK9822...

PL-3094

This item has been replaced by a new version. This page is left here for reference purposes only, and this item is no longer available for orderi...

PL-125

Chassis for the Tamiya 58280 TXT-1. The Tamiya TXT-1 (Tamiya Xtreme Truck) is the ultimate 1/10 scale monster truck chassis, making it a gre...

PL-123

This product is discontinued and has been replaced by the next-generation Qik 2s9v1 Dual Serial Motor Controller, which is better in virtually all...

PL-110

Overview Close up of an SK9822, with the red, green, and blue LEDs on at a low brightness. These flexible RGB LED panels based on the SK9822...

PL-3093

This excellent kit from Joinmax Digital includes all of the components you need to create a six-legged, walking robot. Each of the six legs h...

PL-98

This robotic arm kit includes all of the components you need to build your own robot arm. Seven servos provide six degrees of freedom, allowing yo...

PL-97

This excellent quadruped robot kit includes all of the components you need to build your own four-legged, walking robot. Each leg has two degrees ...

PL-96

Overview This robotic dog kit includes all of the components you need to build your own robot dog. In total, this robot has 15 degrees of free...

PL-95

We carry a wide variety of servos, from ultra-high-torque monster servos with up to 1600 oz-in of torque, to sub-micro servos weighing less t...

PL-94

Overview Close up of an SK9822, with the red, green, and blue LEDs on at a low brightness. These flexible RGB LED panels based on the SK9822...

PL-3092

This robotic gripper kit is the same gripper that is used in the Joinmax Digital Hexapod Monster and Robot Arm, except that it is gray instead...

PL-93

The shoulder joint set contains enough parts to connect three Joinmax Digital servos to create a shoulder and elbow joint identical to the one...

PL-92

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1899

This servo elbow joint kit allows you to connect two Joinmax Digital servos to create an elbow joint as shown to the right. The same set of p...

PL-91

Discontinuation Notice: This product has been discontinued. Please consider one of our other robot kits as an alternative. Tribotz Overview T...

PL-83

The iBOTZ MR-1004 Hydrazoid has been discontinued. Please consider one of our other robot kits. Hydrazoid Overview The iBOTZ Hydrazoid is a go...

PL-82

Antoid Overview The iBOTZ Antoid is a unique, beginner-level robot kit that features one of the most basic functions found in autonomous robot...

PL-81

Overview Close up of one segment of an SK9822-based LED strip, with the red, green, and blue LEDs on at a low brightness. Close up of an S...

PL-3091

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1898

Discontinuation Notice: This product has been discontinued. Please consider one of our other robot kits as an alternative. This robot kit is desi...

PL-80

Note: This product has been replaced by a new Tamiya 70198 Wall-Hugging Mouse and the Tamiya 70195 Wall-Hugging Ladybug. The wall hugging mouse s...

PL-75

This item has been replaced by a new version. This page is left here for reference purposes only, and this item is no longer available for orderi...

PL-1

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1897

Overview Close up of one segment of an SK9822-based LED strip, with the red, green, and blue LEDs on at a low brightness. Close up of an S...

PL-3090