Pololu Australia

Overview The Pololu adjustable boost regulator is a very flexible switching regulator (also called a switched-mode power supply, SMPS, or DC-t...

PL-799

Discontinuation notice: The NCP1402 IC used by this voltage regulator has been discontinued by the manufacturer. We strongly recommend our newer ...

PL-798

Overview Close up of one segment of an SK9822-based LED strip, with the red, green, and blue LEDs on at a low brightness. Close up of an S...

PL-3089

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1895

Overview Close up of one segment of an SK9822-based LED strip, with the red, green, and blue LEDs on at a low brightness. Close up of an S...

PL-3088

MaxBotix ultrasonic sensor line comparison chart. Overview The Maxbotix LV-MaxSonar-EZ family of sonar range finders offers very short- to l...

PL-794

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1894

MaxBotix ultrasonic sensor line comparison chart. Overview The Maxbotix LV-MaxSonar-EZ family of sonar range finders offers very short- to l...

PL-793

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1893

Overview Close up of one segment of an SK9822-based LED strip, with the red, green, and blue LEDs on at a low brightness. Close up of an SK98...

PL-3087

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1892

MaxBotix ultrasonic sensor line comparison chart. Overview The Maxbotix LV-MaxSonar-EZ family of sonar range finders offers very short- to l...

PL-792

Overview Close up of one segment of an SK9822-based LED strip, with the red, green, and blue LEDs on at a low brightness. Close up of an S...

PL-3086

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1891

Overview The Pololu adjustable boost regulator is a very flexible switching regulator (also called a switched-mode power supply, SMPS, or DC-t...

PL-791

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-3082

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1890

This 12" (300 mm) Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single f...

PL-788

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1889

This servo extension cable has female JR connectors on both ends, so it can be used to make connections between devices with 0.1" 3-pin male heade...

PL-785

This servo extension cable has female JR connectors on both ends, so it can be used to make connections between devices with 0.1" 3-pin male heade...

PL-780

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1888

This servo extension cable has female JR connectors on both ends, so it can be used to make connections between devices with 0.1" 3-pin male heade...

PL-779

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-3080

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1887

A Novel Blend of Serial, RC, and Analog Motor Control The TReX Dual-Motor Controller is a versatile, high-power DC motor controller designed to se...

PL-777

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1886

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-3079

Overview This 16-character, 2-line parallel liquid crystal display achieves a large viewing area in a compact package. It uses the common HD4...

PL-773

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1885

Overview This 16-character, 2-line parallel liquid crystal display achieves a large viewing area in a compact package. It features a yellow-g...

PL-772

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1884

Pololu TReX Jr bottom with labels and dimensions A novel blend of serial, RC, and analog motor control The TReX Jr Dual Motor Controller, a ...

PL-767

0.1" connector custom cable. These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connect...

PL-1883

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-3077

This combination of Tamiya parts provides the hardware for two Pololu round robot chassis. The kit includes the following parts: 2 x Tamiya...

PL-762