Robotics

These 10" long stainless steel shafts have a diameter of 5/16". These shafts are solid, which makes them an ideal choice for axles. These shafts ha...

SF-ROB-12273

This “boosted” servo extension board allows up to four different servos to be plugged into it and transfer data up to through a common CAT6 cable b...

SF-ROB-12272

This gearbox has a main output shaft exiting either side of the gearbox (to drive wheels, for example) and another single-ended shaft at 90...

TB-YG2742

This swivel mount works in conjunction with the clamping swivel motor mounts (see below). A ¼-20 lock-nut holes the motor in place, while 6-32 tapp...

SF-ROB-12271

This brand-new Tamiya product features an all plastic moulded gearbox and motor casing. Included is a FA-30 type 3 volt electric motor, axl...

TB-YG2740

High power reversible DC motor with gearbox head for heavy duty applications. Suitable for larger mechatronics projects or as a replacement...

TB-YG2738

These plastic shaft spacers have an inner diameter of 5/8” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bear...

SF-ROB-12269

These 6" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating ...

SF-ROB-12268

These round pillow block bearing mounts attach to the outside of a channel and have a ball bearing with a 1” bore for shafts and tubes. These beari...

SF-ROB-12267

These channel brackets (C type) provide you with an attachment point for a channel mountable gearbox kit. They share the same 0.5" center hole and ...

SF-ROB-12266

These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears have 64 teeth with a ge...

SF-ROB-12265

These clamping hubs are a great and cost-effective choice when attaching hub mount gears or wheels to shafts or tubes and can be a better option th...

SF-ROB-12264

This is a 5mm Rubber Wheel Coupling Kit (Pair) for our Rubber Wheel 136x24mm(5.35x 0.94") Kit which can be used on indoor robots. S...

DF-FIT0387

These 1" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a...

SF-ROB-12263

These standard gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anything else that needs to ...

SF-ROB-12262

Fed up with the noisy hummings of your mobile robot? Want higher torque output with current power voltage? This customized high quality DC motor...

DF-FIT0397

Overview The Parallax BASIC Stamp Discovery Kit contains everything you need to get started with microcontroller programming and electronics, incl...

PL-1611

These flat bearing mounts attach to the face of a channel or plate and have a ball bearing with a 3/8” bore for shafts. They can be used in conjunc...

SF-ROB-12260

These 1" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a...

SF-ROB-12259

If you need a serial port on your computer but you don’t have one, this USB to serial (RS-232) adapter is an easy solution. To use the adapter...

PL-1606

These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 12 teeth with a g...

SF-ROB-12258

These 4" long stainless steel shafts have a diameter of 5/16". These shafts are solid, which makes them an ideal choice for axles. These shafts hav...

SF-ROB-12257

Parallax SumoBot Robots included in the SumoBot Robot Competition Kit. This kit comes with all the parts you need to build and program two h...

PL-1603

These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears have 76 teeth with a ge...

SF-ROB-12256

The Boe-Bot. The Boe-Bot Robot Kit comes with everything you need to make your very own Boe-Bot, including sensors and other electronic comp...

PL-1602

Overview The Parallax BASIC Stamp Discovery Kit comes with everything you need to get started with microcontroller programming and electronics. T...

PL-1601

These 10" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". When used with the matin...

SF-ROB-12254

These 12" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06". When used with the ma...

SF-ROB-12253

Overview The BASIC Stamp 2 module serves as the brains inside of electronics projects and applications that require a programmable microcontroller...

PL-1600

This is a Gear Motor w/Encoder, model No. GB37Y3530-12V-90EN. It is a powerful 12V motor with a 90:1 metal gearbox and an integrated quadrature ...

DF-FIT0403

These side mount brackets can function as mounts for endcaps for Actobotics channels. They have two untapped holes spaced 0.44" apart perpendicular...

SF-ROB-12252

Pololu 15.5D mm metal gearmotor bracket with a 15.5D mm metal gearmotor. Pololu 15.5D mm metal gearmotor bracket with a micro metal gearmo...

PL-1599

These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts, or...

SF-ROB-12251

Discontinuation notice: This product is now only available by large-volume special order. Please contact us for more information. We recommend o...

PL-1598

These aluminum channels are the building blocks to the Actobotics line and function as the back bone to your electromechanical project. These chann...

SF-ROB-12250

Discontinuation notice: This product is now only available by large-volume special order. Please contact us for more information. We recommend o...

PL-1597

These 90° clamping hubs provide a great way to attach a 5/8” diameter tube or shaft to a ½" diameter hub. These clamping hubs have a 5/8" diameter ...

SF-ROB-12249

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-1596

These pinion gears attach to a 6mm D-shaft or gear motor using a setscrew. These gears have 16 teeth with a gear pitch of 32P, an outer diameter of...

SF-ROB-12248

Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-...

PL-1595

Overview These brushed DC gearmotors are compact and affordable — perfect for building a quick, miniature robot. They are intended for use at 4.5...

PL-1594

These ball bearing hubs from Actobotics are great when you need to securely fasten a free-spinning shaft to a stationary channel to drive a pulley,...

SF-ROB-12245

Serial Servo Driver is a servo driver board that can drive up to 8 servos with a precision of 5us. The communication interface is TTL UART ...

TB-XC4586