Robotics

These 8" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts hav...

SF-ROB-12354

These quad hub mounts can attach to brackets, ServoBlocks, or anything that needs a 90 degree angle with additional attachment points for Actobotic...

SF-ROB-12353

These clamping hubs are a great and cost-effective choice when attaching hub mount gears or wheels to shafts or tubes and can be a better option th...

SF-ROB-12352

These zinc-plated socket head machine screws are 3/16” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/64...

SF-ROB-12351

Quad hub mounts attach to the inside of a channel at a 90 degree angle providing you with additional attachment points for the open top of a channe...

SF-ROB-12349

These 12" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating...

SF-ROB-12346

These 2.25" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, whe...

SF-ROB-12344

These lipped Rubber Rings have an inner diameter of 1.65", a width of 1/8", and a sturdy rubber sidewall. These rings can be used as a replacement ...

SF-ROB-12343

This small form factor micro servo with 360 degree continuous rotation is compatible with servo shields for Arduino. It's a very versatile small...

DF-SER0037

These clear yellow precision disk wheels have an outer diameter of 2”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are...

SF-ROB-12342

These servo gears are made specifically to fit a Hitec C1 servo spline, allowing you to mate other gears to your servo. They have 24 teeth with a g...

SF-ROB-12341

The uArm is an Arduino-powered, 4-axis robot arm that has been modeled after industrial pallet packing and car building robots which can be set up ...

SF-ROB-13663

These 1.375" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, wh...

SF-ROB-12340

These 3" long stainless steel shafts have a diameter of 1/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have...

SF-ROB-12339

These precision gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anything else that needs to...

SF-ROB-12115

These 6" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts hav...

SF-ROB-12338

These 6" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06". When used with the mat...

SF-ROB-12337

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows t...

SF-ROB-12336

The SparkFun Serial Controlled Motor Driver allows you to control up to two DC motors using a serial command interface. The serial interface is eas...

SF-ROB-09571

These 10" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts ha...

SF-ROB-12335

These blue precision disk wheels have an outer diameter of 3”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal f...

SF-ROB-12334

Pillow block bearing mounts attach to the outside of a channel and can be used as simple hinges. These bearing mounts have a width of 1.32”, a thic...

SF-ROB-12333

These zinc-plated socket head machine screws are 5/8” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/64"...

SF-ROB-12332

This servo plate allows you to attach gears and mechanical structures to your standard sized servo. There are 4 6-32 tapped holes for mounting your...

SF-ROB-12330

These skate wheel adaptors have a diameter of 1”, a width of 0.32”, and utilize the 0.77” hub pattern. These adaptors allow you to attach the 2.975...

SF-ROB-12329

These aluminum beams are great for making unique links and connections in your Actobotics project thanks to 5 through-holes running its length and ...

SF-ROB-12327

These 6" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a...

SF-ROB-12326

These 6" long aluminum tubes have an outer diameter of ½", an inner diameter of 0.444", and a wall thickness of 0.03". When used with the mating tu...

SF-ROB-12324

Description: These are standard locknuts with 4-40 thread. For use with 4-40 machine screws. They have a nylon insert that allows them to stay tigh...

SF-PRT-10460

These 1.25" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, whe...

SF-ROB-12323

INTRODUCTION NMB brushless DC fan, small size with high wind air flow, make it a good module in cooling application. And thi...

DF-FIT0437