Robotics

Pillow block bearing mounts attach to the outside of a channel and can be used as simple hinges. These bearing mounts have a width of 1.32”, a thic...

SF-ROB-12110

Overview These cylindrical brushed DC gearmotors are available in a wide range of gear ratios, from 25:1 up to 488:1, and with three different mot...

PL-3452

These hub-mountable aluminum pulleys can be used to drive wheels or other pulleys with ¼” or ⅛” belts. They have an outer diameter of 2.125”, a bor...

SF-ROB-12109

Pololu 40×7mm wheels. Motor Connections These wheels are designed to press-fit securely onto the 3mm D output shafts on many of our gearmoto...

PL-1454

Set screw hubs offer a cheap way to attach hub mount gears or wheels to a shaft. The hub offers 4 equally spaced 6-32 tapped holes utilizing the 0....

SF-ROB-12108

Overview These cylindrical brushed DC gearmotors are available in a wide range of gear ratios, from 25:1 up to 488:1, and with three different mot...

PL-3451

These clear yellow precision disk wheels have an outer diameter of 4”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are...

SF-ROB-12107

Overview These cylindrical brushed DC gearmotors are available in a wide range of gear ratios, from 25:1 up to 488:1, and with three different mot...

PL-3450

These smooth (round) belts have a Durometer hardness of A70 and can withstand temperatures from -35 to 250 degrees F. Their elastic nature allows t...

SF-ROB-12106

OverviewThe Tic family of stepper motor controllers makes it easy to add basic control of a bipolar stepper motor to a variety of projects. These v...

PL-3138

New versions available! We have replaced these older short-shaft versions of our 20D mm gearmotors with a much wider assortment of gear ratios th...

PL-1450

These set screw hubs make it capable to connect a micro gearmotor with a 3mm bore to a precision disk wheel or other object with a 0.77" hub patter...

SF-ROB-12104

OverviewThe Tic family of stepper motor controllers makes it easy to add basic control of a bipolar stepper motor to a variety of projects. These v...

PL-3139

We use this motor driver in our VNH5019 motor driver carrier and our dual VNH5019 motor driver shield for Arduino. We also carry boards based on ...

PL-1449

These hub mount 90 degree angle brackets mate directly to Actobotics channels and hub mounts and are useful as attachment points. They share the sa...

SF-ROB-12103

This version of our STSPIN220 Low-Voltage Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it...

PL-2877

Overview Discontinuation notice: These gearmotors have been replaced by functionally identical versions with plastic end caps over the encoders (t...

PL-1447

These 90 degree hub mounts mate directly to Actobotics channels in multiple positions and are useful as attachment points for shafts and tubes with...

SF-ROB-12102

OverviewSTSPIN220 Low-Voltage Stepper Motor Driver Carrier, bottom view with dimensions.This product is a carrier board or breakout board for the S...

PL-2876

These 8" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating ...

SF-ROB-12101

XYZrobot Smart Servo Cable connector. XYZrobot Smart Servo Cable connector.

PL-3406

Overview Discontinuation notice: These gearmotors have been replaced by functionally identical versions with plastic end caps over the encoders (t...

PL-1446

OverviewSTSPIN820 Stepper Motor Driver Carrier, bottom view with dimensions.This product is a carrier board or breakout board for the STSPIN820 ste...

PL-2878

Pillow block bearing mounts attach to the outside of a channel and can be used as simple hinges. These bearing mounts have a width of 1.32”, a thic...

SF-ROB-12100