Seeed Studio Australia

  This board converts a USB connection into 5 volt TX and RX that you can connect straight to the Arduino Ethernet or any other boards with an F...

SS-105990003

PLA is an environmental-friendly polymer originally derived from crops as maize. Different from ABS, PLA has a firm glass transition temperature, ...

SS-322040002

SDLogger is a simple serial logger based on SparkFun/Nathan Seidle's OpenLog. It is using an ATmega644P processor running at 14.7456MHz and logs t...

SS-105990002

Features Can be used to program most AVR microcontrollers via USB (USBASP compatible. See http://www.fischl.de/usbasp/ for details) A general pur...

SS-105990001

This Arduino Motor shield uses L298P chip which allow to drive two 7-12V DC motors with maximum 2A current. This shield can be directly mount ont...

SS-105990000

This is a TRS(3.5mm) to BNC converter cable for Seeed Studio DSO nano. You can directly convert any other  BNC probe from other Digital Storage O...

SS-321080060

This product can now be purchased at www.ghielectronics.com.   This motor driver module controls the speed and direction on 2 DC motors, up to...

SS-105120001

  Description The 4WD Driver Platform V1.0 is a multi-purpose, all-in-one development platform based on Intel Edison. It is specially desig...

SS-105090001

The Xadow Duino is specially designed for building up awesome Lighting Devices using the most popular RGB LED WS2812b. Based on the MCU ATmega32u4 ...

SS-105040001

This is a Digital probe for DSO Quad( The CHC and CHD are digital channels ).  If you ever received a coupon code for the probe, please follow be...

SS-321080048

RF cables are required when connecting RF Explorer to other instruments or devices. This 50cm cable is good for any frequency up to 3GHz, and can...

SS-321080047

  This small vibrator motor can vibrate like your phone. When using it, You only need to power for the module and then send "Vibration" command....

SS-105040000

This is a BNC to MCX converter cable for Seeed Studio DSO Quad.You can directly convert any other probe from other Digital Storage Oscilloscope t...

SS-321080039

Description The Motor Bridge Cape features bi-directional motor control using two TB6612FNG integrated dual H-bridge, so it can control...

SS-105030006

This P6100 probe can be used with general purpose oscilloscope having a 1MΩ input impedance and bandwidth up to 100MHZ. It is also compatible with...

SS-321080036

This is a DC/DC step-down voltage regulator that converts input voltage between 4.5V and 16V into a smaller voltage between 1V and 12V, capable o...

SS-105030005

This MCX Probe kit is designed for use with our DSO Quad. It includes a 60MHz professional probe with hook and tip as well as ground lead and mark...

SS-321080035

Spare probe for DSO nano. If you need a 2nd probe, get this or make one by yourself.

SS-321080034

JST 2pin connector with 2.54mm between the two pins which is compatible with Seeeduino power jack! 

SS-321080032

Specification: 200cm in length 28AWG Insulation Resistance：10MΩ short circuit impedance：>20KΩ Conductor Resistance：>0.3Ω nominal vol...

SS-321070032

The 4A Motor Shield is based on the Freescale MC33932 dual H-Bridge Power IC , which can control inductive loads with currents up to 5.0A peak per...

SS-105030004

The Renbotics Servo Shield Rev 2 is an Arduino-compatible shield that uses only two pins to drive 16 servos per shield. The Renbotics Servo Shiel...

SS-105030003

The Motor Shield is a driver module for motors that allows you to use Arduino to control the working speed and direction of the motor. Based on t...

SS-105030001